Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
186 4159 d 5 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4163 d 0 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4167 d 0 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4171 d 6 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4173 d 5 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4175 d 19 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4177 d 8 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4178 d 8 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4179 d 7 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4179 d 13 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4180 d 10 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
175 4188 d 18 h Kevin /KiCAD/Libraries/ Removed old parts libraries.  
173 4188 d 18 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  
138 4324 d 19 h Kevin /KiCAD/Projects/ Misc changes.  
137 4367 d 0 h Kevin /KiCAD/Projects/breadboardPowerMain/ Finalized revision A1 for the breadboard PSU.  
136 4367 d 0 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision D0. Removed Tx and Rx LEDs and added a pulldown resistor to C5 and a button to bring C5 high.  
135 4377 d 13 h Kevin /KiCAD/Projects/ Increased annular ring size of headers by 30 mil.
Changed power regulator mounting hole to 150 mil (actual diameter of hole).		  
134 4377 d 15 h Kevin /KiCAD/Projects/breadboardPowerMain/ Changed regulator output capacitor to 805 footprint. Also corrected switch on/off text.  
133 4380 d 18 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision C0 to add a 32.768 Crystal and rerouted board to place some components on the backside.
Replaced the 603 footprints for the 10uF capacitors on the power bridge designs with an 805 footprint.		  
132 4391 d 16 h Kevin /KiCAD/ Finished the design for a breadboard power supply as well as a board to interconnect power rails on the same breadboard and between breadboards.  

←Prev12Next→

Show All