Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
188 4127 d 16 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4129 d 8 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4129 d 8 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4133 d 3 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4137 d 3 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4141 d 9 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4143 d 8 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4145 d 22 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4147 d 11 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4148 d 11 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4149 d 10 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4149 d 16 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4150 d 13 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
173 4158 d 21 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  
138 4294 d 22 h Kevin /KiCAD/Projects/ Misc changes.  
137 4337 d 3 h Kevin /KiCAD/Projects/breadboardPowerMain/ Finalized revision A1 for the breadboard PSU.  
136 4337 d 3 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision D0. Removed Tx and Rx LEDs and added a pulldown resistor to C5 and a button to bring C5 high.  
135 4347 d 16 h Kevin /KiCAD/Projects/ Increased annular ring size of headers by 30 mil.
Changed power regulator mounting hole to 150 mil (actual diameter of hole).		  
134 4347 d 18 h Kevin /KiCAD/Projects/breadboardPowerMain/ Changed regulator output capacitor to 805 footprint. Also corrected switch on/off text.  
133 4350 d 21 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision C0 to add a 32.768 Crystal and rerouted board to place some components on the backside.
Replaced the 603 footprints for the 10uF capacitors on the power bridge designs with an 805 footprint.		  

←Prev12Next→

Show All