Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
245 3850 d 1 h Kevin /KiCAD/ Finished preliminary PCB board layout for the game controller.  
244 3850 d 20 h Kevin /KiCAD/ Added MSP23009 (I2C I/O expander) and TCL59116 (I2C LED driver) chips to the KiCAD library.
Created the schematic for the LED cube game controller board.		  
225 3889 d 4 h Kevin /KiCAD/ Changed the drill size on the RGB LED cube PCB to be slightly larger.  
221 3962 d 10 h Kevin /KiCAD/Libraries/ Updated KiCAD libraries with new parts.  
220 3962 d 11 h Kevin /KiCAD/Projects/bluetooth_IMU/ Updated the BLE IMU board to revision C and replaced the BLE chip with the RN-42 bluetooth module.  
196 4075 d 21 h Kevin /KiCAD/Projects/bluetooth_IMU/ Fixed a wrong entry in the parts list.  
195 4075 d 22 h Kevin /KiCAD/Projects/bluetooth_IMU/ Changed the MAX17043 battery monitor chip to MAX17040 to remove the BGA footprint.
Isolated the programming lines on the PIC by removing an interrupt line from both the accelerometer and gyroscope.
Updated the parts list with the correct parts to order.		  
194 4076 d 2 h Kevin /KiCAD/Libraries/ Updated KiCad libraries with some new parts.  
191 4104 d 8 h Kevin /KiCAD/Projects/ Finalized boards for manufacturing.  
190 4104 d 19 h Kevin /KiCAD/Projects/bluetooth_IMU/ Shrunk Bluetooth IMU PCB to 15x26mm from 15x28mm  
189 4104 d 19 h Kevin /KiCAD/ Finished new project for a 12 connector liPo charger.  
188 4107 d 19 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4109 d 11 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4109 d 11 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4113 d 6 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4117 d 6 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4121 d 12 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4123 d 11 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4126 d 1 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4127 d 14 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  

←Prev12Next→

Show All