Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
195 4167 d 19 h Kevin /KiCAD/Projects/bluetooth_IMU/ Changed the MAX17043 battery monitor chip to MAX17040 to remove the BGA footprint.
Isolated the programming lines on the PIC by removing an interrupt line from both the accelerometer and gyroscope.
Updated the parts list with the correct parts to order.		  
194 4167 d 23 h Kevin /KiCAD/Libraries/ Updated KiCad libraries with some new parts.  
191 4196 d 5 h Kevin /KiCAD/Projects/ Finalized boards for manufacturing.  
190 4196 d 16 h Kevin /KiCAD/Projects/bluetooth_IMU/ Shrunk Bluetooth IMU PCB to 15x26mm from 15x28mm  
189 4196 d 16 h Kevin /KiCAD/ Finished new project for a 12 connector liPo charger.  
188 4199 d 16 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4201 d 8 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4201 d 8 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4205 d 3 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4209 d 3 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4213 d 9 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4215 d 8 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4217 d 22 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4219 d 11 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4220 d 11 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4221 d 10 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4221 d 16 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4222 d 13 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
175 4230 d 21 h Kevin /KiCAD/Libraries/ Removed old parts libraries.  
173 4230 d 21 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  

←Prev12Next→

Show All