Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
337 3442 d 4 h Kevin /CAD Files/ Uploaded custom Simplify3D UM2 profile.  
332 3447 d 11 h Kevin /CAD Files/Extruder_Fan_Mount/ Fixed a number of issues and added slots to mount fans via M3 screws and nuts.  
331 3450 d 3 h Kevin /CAD Files/Extruder_Fan_Mount/ Changed fan mount to use M3 screws and nuts for attachment. Also added front text.  
330 3450 d 10 h Kevin /CAD Files/Extruder_Fan_Mount/ Initial import of UM2 fan mount design.  
328 3485 d 11 h Kevin /CAD Files/Paste_Extruder/ Added thread adapters for pressure regulator.  
326 3485 d 11 h Kevin /CAD Files/Paste_Extruder/ Updated paste extruder design to rev. B.  
325 3518 d 6 h Kevin /CAD Files/Paste_Extruder/ Import of files for solder paste extruder design.  
324 3539 d 8 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes for easier assembly.  
323 3541 d 3 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Increased belt spacing from 26.5mm to 27mm to decrease slack.  
322 3547 d 10 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Added an optional variation of the base with a lower profile.  
321 3551 d 10 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added exploded view of extruder.  
320 3551 d 10 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added rendered images for revision F.  
319 3552 d 6 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added design files for revision F of the extruder.  
318 3555 d 13 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Shrunk the hole size for the motor gear for a slightly better fit.  
317 3557 d 7 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Shrunk the hole size for the motor gear for a slightly better fit.  
311 3576 d 12 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Modified a few files to reflect actual dimensions.  
310 3577 d 11 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Minor change to reduce retraction amount when printing with full infill.  
309 3577 d 14 h Kevin /CAD Files/Gears/ Added gearbox design for NEMA17 stepper motors.  
308 3586 d 11 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Widened the center hole for a gear by 0.1mm.  
307 3587 d 20 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Uploaded version of rev. E with herringbone gears.  

←Prev12Next→

Show All