Subversion Repositories Code-Repo

Rev

Go to most recent revision | Hide changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff Changes
371 3339 d 8 h Kevin /CAD Files/ Profile update as previous previous profile was wrong.  
/CAD Files/Ultimaker 2 Custom.fff
370 3339 d 20 h Kevin /CAD Files/ Fixed end of print script with missing commands.  
/CAD Files/Ultimaker 2 Custom.fff
369 3340 d 1 h Kevin /CAD Files/ Fixed a missed setting.  
/CAD Files/Ultimaker 2 Custom.fff
368 3340 d 1 h Kevin /CAD Files/ Updated custom UM2 Simplify3D profile.  
/CAD Files/Ultimaker 2 Custom.fff
367 3385 d 2 h Kevin /CAD Files/Paste_Extruder/ Updated NPT adapter to proper tolerances.  
/CAD Files/Paste_Extruder/NPT_Thread_Adapter_1.8M.ipt
/CAD Files/Paste_Extruder/NPT_Thread_Adapter_1.8M.stl
365 3387 d 20 h Kevin /CAD Files/Paste_Extruder/ Added Taz4 mount to paste dispenser.  
/CAD Files/Paste_Extruder/Taz4_Mount.ipt
/CAD Files/Paste_Extruder/Taz4_Mount.stl
/CAD Files/Paste_Extruder/Taz4_Mount_Left.ipt
/CAD Files/Paste_Extruder/Taz4_Mount_Left.stl
/CAD Files/Paste_Extruder/Taz4_Mount_Right.ipt
/CAD Files/Paste_Extruder/Taz4_Mount_Right.stl
/CAD Files/Paste_Extruder/Assembly.iam
361 3402 d 2 h Kevin /CAD Files/Paste_Extruder/ Finalized revision C of paste extruder design.  
/CAD Files/Paste_Extruder/Assembly.iam
/CAD Files/Paste_Extruder/Base.ipt
/CAD Files/Paste_Extruder/Base.stl
/CAD Files/Paste_Extruder/Syringe_Holder.ipt
/CAD Files/Paste_Extruder/Syringe_Holder.stl
360 3402 d 2 h Kevin /CAD Files/Extruder_Fan_Mount/ Lengthened fan mount screw hole length.  
/CAD Files/Extruder_Fan_Mount/Mount.ipt
/CAD Files/Extruder_Fan_Mount/Mount.stl
359 3402 d 2 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes to allow printing without use of supports.  
/CAD Files/Belt_Extruder/Rev. F/Bottom_Plate_Rev_6.ipt
/CAD Files/Belt_Extruder/Rev. F/Bottom_Plate_Rev_6.stl
/CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6.iam
/CAD Files/Belt_Extruder/Rev. F/Top_Plate_Rev_6.ipt
/CAD Files/Belt_Extruder/Rev. F/Top_Plate_Rev_6.stl
358 3403 d 23 h Kevin /CAD Files/Paste_Extruder/ Updated paste dispenser to revision C.  
/CAD Files/Paste_Extruder/Nut_M3_2.4mm.ipt
/CAD Files/Paste_Extruder/Screw_Mount_Alt.ipt
/CAD Files/Paste_Extruder/Screw_Mount_Alt.stl
/CAD Files/Paste_Extruder/V-Ring_A.ipt
/CAD Files/Paste_Extruder/V-Ring_B.ipt
/CAD Files/Paste_Extruder/Assembly_1.png
/CAD Files/Paste_Extruder/Assembly_2.png
/CAD Files/Paste_Extruder/Assembly_Rev2.iam
/CAD Files/Paste_Extruder/Assembly_Rev2_1.png
/CAD Files/Paste_Extruder/Assembly_Rev2_2.png
/CAD Files/Paste_Extruder/Base_Rev2.ipt
/CAD Files/Paste_Extruder/Base_Rev2.stl
/CAD Files/Paste_Extruder/Cross Section 2.png
/CAD Files/Paste_Extruder/Cross Section.png
/CAD Files/Paste_Extruder/Cross Section_Rev2_1.png
/CAD Files/Paste_Extruder/Cross Section_Rev2_2.png
/CAD Files/Paste_Extruder/Motor_Mount.ipt
/CAD Files/Paste_Extruder/Motor_Mount.stl
/CAD Files/Paste_Extruder/Motor_Mount_Rev2.ipt
/CAD Files/Paste_Extruder/Motor_Mount_Rev2.stl
/CAD Files/Paste_Extruder/O-Ring_9mm_2mm.ipt
/CAD Files/Paste_Extruder/Screw_Mount_Rev2.ipt
/CAD Files/Paste_Extruder/Screw_Mount_Rev2.stl
/CAD Files/Paste_Extruder/Spacer_10mmH_8mmOD_3.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_10mmH_8mmOD_3.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_6mm_3.4mm.ipt
/CAD Files/Paste_Extruder/Spacer_7.1mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.1mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.2mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.2mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.3mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.3mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.4mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.4mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.5mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.5mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.6mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.6mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.7mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.7mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.8mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.8mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7.9mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7.9mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_7mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_7mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Spacer_8mmH_7.3mmOD_5.4mmID.ipt
/CAD Files/Paste_Extruder/Spacer_8mmH_7.3mmOD_5.4mmID.stl
/CAD Files/Paste_Extruder/Assembly.iam
/CAD Files/Paste_Extruder/Base.ipt
/CAD Files/Paste_Extruder/Base.stl
/CAD Files/Paste_Extruder/Screw.ipt
/CAD Files/Paste_Extruder/Screw_M3_10mm.ipt
/CAD Files/Paste_Extruder/Screw_M3_16mm.ipt
/CAD Files/Paste_Extruder/Screw_M3_20mm.ipt
/CAD Files/Paste_Extruder/Screw_M3_25mm.ipt
/CAD Files/Paste_Extruder/Screw_Mount.ipt
/CAD Files/Paste_Extruder/Screw_Mount.stl
/CAD Files/Paste_Extruder/Syringe_Holder.ipt
/CAD Files/Paste_Extruder/Syringe_Holder.stl
357 3411 d 14 h Kevin /CAD Files/Extruder_Fan_Mount/ Updated mount to reflect lower tolerance settings.  
/CAD Files/Extruder_Fan_Mount/Mount.ipt
/CAD Files/Extruder_Fan_Mount/Mount.stl
355 3444 d 1 h Kevin /CAD Files/Calibration_Prints/ Import of calibration prints.  
/CAD Files/Calibration_Prints
/CAD Files/Calibration_Prints/5mm_Calibration_Steps.stl
/CAD Files/Calibration_Prints/Cylinder_16mmW_10mmH.stl
/CAD Files/Calibration_Prints/Cylinder_18mmW_10mmH.stl
/CAD Files/Calibration_Prints/Cylinder_20mmW_10mmH.stl
/CAD Files/Calibration_Prints/Wall_40mm_0.30mm.stl
/CAD Files/Calibration_Prints/Wall_40mm_0.40mm.stl
/CAD Files/Calibration_Prints/Wall_40mm_0.60mm.stl
340 3459 d 22 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Added high-torque carrier attachment for gearbox.  
/CAD Files/Gears/Handheld_Gearbox/Gear_Base_15mmD_4x_1mmH_Mount_Flat.ipt
/CAD Files/Gears/Handheld_Gearbox/Gear_Base_15mmD_4x_1mmH_Mount_Flat.stl
339 3461 d 2 h Kevin /CAD Files/ Updated custom UM2 Simplify3D profile.  
/CAD Files/Ultimaker 2 Custom.fff
338 3461 d 3 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Initial import of design files for handheld planetary gearbox.  
/CAD Files/Gears/Handheld_Gearbox
/CAD Files/Gears/Handheld_Gearbox/Double_Helical_Gear_14.8mmOD_8.3mmID_8mmH_0.1mmBL_40deg_0.8mmM_14T.ipt
/CAD Files/Gears/Handheld_Gearbox/Double_Helical_Gear_14.8mmOD_8.3mmID_8mmH_0.1mmBL_40deg_0.8mmM_14T.stl
/CAD Files/Gears/Handheld_Gearbox/Double_Helical_Gear_14.8mmOD_8.3mmID_8mmH_0.1mmBL_40deg_0.8mmM_14T_Peg.ipt
/CAD Files/Gears/Handheld_Gearbox/Double_Helical_Gear_14.8mmOD_8.3mmID_8mmH_0.1mmBL_40deg_0.8mmM_14T_Peg.stl
/CAD Files/Gears/Handheld_Gearbox/Gear_Base_15mmD_4x_1mmH_Mount.ipt
/CAD Files/Gears/Handheld_Gearbox/Gear_Base_15mmD_4x_1mmH_Mount.stl
/CAD Files/Gears/Handheld_Gearbox/Gear_Base_15mmD_4x_7.65mmW_4mmH_Mount.ipt
/CAD Files/Gears/Handheld_Gearbox/Gear_Base_15mmD_4x_7.65mmW_4mmH_Mount.stl
/CAD Files/Gears/Handheld_Gearbox/Gear_Base_15mmD_5x_7.65mmW_4mmH_Mount.ipt
/CAD Files/Gears/Handheld_Gearbox/Inner_Helical_Gear_54mmOD_3x15.6mmID_4mmH_0.1mmBL_40deg_0.8mmM_42T_CCW.ipt
/CAD Files/Gears/Handheld_Gearbox/Inner_Helical_Gear_54mmOD_3x15.6mmID_4mmH_0.1mmBL_40deg_0.8mmM_42T_CCW.stl
/CAD Files/Gears/Handheld_Gearbox/Inner_Helical_Gear_54mmOD_3x15.6mmID_4mmH_0.1mmBL_40deg_0.8mmM_42T_CW.ipt
/CAD Files/Gears/Handheld_Gearbox/Inner_Helical_Gear_54mmOD_3x15.6mmID_4mmH_0.1mmBL_40deg_0.8mmM_42T_CW.stl
337 3462 d 19 h Kevin /CAD Files/ Uploaded custom Simplify3D UM2 profile.  
/CAD Files/Ultimaker 2 Custom.fff
332 3468 d 2 h Kevin /CAD Files/Extruder_Fan_Mount/ Fixed a number of issues and added slots to mount fans via M3 screws and nuts.  
/CAD Files/Extruder_Fan_Mount/Cross-section.png
/CAD Files/Extruder_Fan_Mount/Mount.ipt
/CAD Files/Extruder_Fan_Mount/Mount.stl
331 3470 d 18 h Kevin /CAD Files/Extruder_Fan_Mount/ Changed fan mount to use M3 screws and nuts for attachment. Also added front text.  
/CAD Files/Extruder_Fan_Mount/Mount.ipt
/CAD Files/Extruder_Fan_Mount/Mount.stl
330 3471 d 1 h Kevin /CAD Files/Extruder_Fan_Mount/ Initial import of UM2 fan mount design.  
/CAD Files/Extruder_Fan_Mount
/CAD Files/Extruder_Fan_Mount/Cross-section.png
/CAD Files/Extruder_Fan_Mount/Mount.ipt
/CAD Files/Extruder_Fan_Mount/Mount.stl
328 3506 d 2 h Kevin /CAD Files/Paste_Extruder/ Added thread adapters for pressure regulator.  
/CAD Files/Paste_Extruder/NPT_Thread_Adapter_1.4F.ipt
/CAD Files/Paste_Extruder/NPT_Thread_Adapter_1.4F.stl
/CAD Files/Paste_Extruder/NPT_Thread_Adapter_1.8M.ipt
/CAD Files/Paste_Extruder/NPT_Thread_Adapter_1.8M.stl
/CAD Files/Paste_Extruder/NPT_Thread_Adapter.ipt
/CAD Files/Paste_Extruder/NPT_Thread_Adapter.stl
/CAD Files/Paste_Extruder/NPT_Thread_Adapter_Quick_Release.ipt

←Prev12Next→

Show All