Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
367 3524 d 4 h Kevin /CAD Files/Paste_Extruder/ Updated NPT adapter to proper tolerances.  
365 3526 d 22 h Kevin /CAD Files/Paste_Extruder/ Added Taz4 mount to paste dispenser.  
361 3541 d 4 h Kevin /CAD Files/Paste_Extruder/ Finalized revision C of paste extruder design.  
360 3541 d 4 h Kevin /CAD Files/Extruder_Fan_Mount/ Lengthened fan mount screw hole length.  
359 3541 d 4 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes to allow printing without use of supports.  
358 3543 d 1 h Kevin /CAD Files/Paste_Extruder/ Updated paste dispenser to revision C.  
357 3550 d 16 h Kevin /CAD Files/Extruder_Fan_Mount/ Updated mount to reflect lower tolerance settings.  
355 3583 d 3 h Kevin /CAD Files/Calibration_Prints/ Import of calibration prints.  
340 3599 d 0 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Added high-torque carrier attachment for gearbox.  
339 3600 d 5 h Kevin /CAD Files/ Updated custom UM2 Simplify3D profile.  
338 3600 d 5 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Initial import of design files for handheld planetary gearbox.  
337 3601 d 21 h Kevin /CAD Files/ Uploaded custom Simplify3D UM2 profile.  
332 3607 d 4 h Kevin /CAD Files/Extruder_Fan_Mount/ Fixed a number of issues and added slots to mount fans via M3 screws and nuts.  
331 3609 d 21 h Kevin /CAD Files/Extruder_Fan_Mount/ Changed fan mount to use M3 screws and nuts for attachment. Also added front text.  
330 3610 d 3 h Kevin /CAD Files/Extruder_Fan_Mount/ Initial import of UM2 fan mount design.  
328 3645 d 4 h Kevin /CAD Files/Paste_Extruder/ Added thread adapters for pressure regulator.  
326 3645 d 4 h Kevin /CAD Files/Paste_Extruder/ Updated paste extruder design to rev. B.  
325 3677 d 23 h Kevin /CAD Files/Paste_Extruder/ Import of files for solder paste extruder design.  
324 3699 d 1 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes for easier assembly.  
323 3700 d 20 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Increased belt spacing from 26.5mm to 27mm to decrease slack.  

←Prev12Next→

Show All