Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
330 3613 d 18 h Kevin /CAD Files/Extruder_Fan_Mount/ Initial import of UM2 fan mount design.  
328 3648 d 18 h Kevin /CAD Files/Paste_Extruder/ Added thread adapters for pressure regulator.  
326 3648 d 18 h Kevin /CAD Files/Paste_Extruder/ Updated paste extruder design to rev. B.  
325 3681 d 14 h Kevin /CAD Files/Paste_Extruder/ Import of files for solder paste extruder design.  
324 3702 d 15 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes for easier assembly.  
323 3704 d 11 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Increased belt spacing from 26.5mm to 27mm to decrease slack.  
322 3710 d 18 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Added an optional variation of the base with a lower profile.  
321 3714 d 18 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added exploded view of extruder.  
320 3714 d 18 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added rendered images for revision F.  
319 3715 d 13 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added design files for revision F of the extruder.  
318 3718 d 21 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Shrunk the hole size for the motor gear for a slightly better fit.  
317 3720 d 14 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Shrunk the hole size for the motor gear for a slightly better fit.  
311 3739 d 19 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Modified a few files to reflect actual dimensions.  
310 3740 d 19 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Minor change to reduce retraction amount when printing with full infill.  
309 3740 d 21 h Kevin /CAD Files/Gears/ Added gearbox design for NEMA17 stepper motors.  
308 3749 d 18 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Widened the center hole for a gear by 0.1mm.  
307 3751 d 4 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Uploaded version of rev. E with herringbone gears.  
306 3752 d 23 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Fixed a few issues with the bottom plate.  
305 3753 d 12 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Added files for revision E of the extruder.  
304 3754 d 15 h Kevin /CAD Files/Belt_Extruder/Rev. D/ Fixed dimensions of disassembly image.  

←Prev12Next→

Show All