Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
328 3645 d 6 h Kevin /CAD Files/Paste_Extruder/ Added thread adapters for pressure regulator.  
326 3645 d 6 h Kevin /CAD Files/Paste_Extruder/ Updated paste extruder design to rev. B.  
325 3678 d 1 h Kevin /CAD Files/Paste_Extruder/ Import of files for solder paste extruder design.  
324 3699 d 3 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes for easier assembly.  
323 3700 d 22 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Increased belt spacing from 26.5mm to 27mm to decrease slack.  
322 3707 d 5 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Added an optional variation of the base with a lower profile.  
321 3711 d 5 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added exploded view of extruder.  
320 3711 d 5 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added rendered images for revision F.  
319 3712 d 1 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added design files for revision F of the extruder.  
318 3715 d 8 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Shrunk the hole size for the motor gear for a slightly better fit.  
317 3717 d 2 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Shrunk the hole size for the motor gear for a slightly better fit.  
311 3736 d 7 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Modified a few files to reflect actual dimensions.  
310 3737 d 6 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Minor change to reduce retraction amount when printing with full infill.  
309 3737 d 9 h Kevin /CAD Files/Gears/ Added gearbox design for NEMA17 stepper motors.  
308 3746 d 6 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Widened the center hole for a gear by 0.1mm.  
307 3747 d 15 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Uploaded version of rev. E with herringbone gears.  
306 3749 d 11 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Fixed a few issues with the bottom plate.  
305 3750 d 0 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Added files for revision E of the extruder.  
304 3751 d 2 h Kevin /CAD Files/Belt_Extruder/Rev. D/ Fixed dimensions of disassembly image.  
303 3751 d 2 h Kevin /CAD Files/Belt_Extruder/Rev. D/ Added disassembly image for extruder revision C.  

←Prev12Next→

Show All