Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
194 4078 d 17 h Kevin /KiCAD/Libraries/ Updated KiCad libraries with some new parts.  
191 4106 d 23 h Kevin /KiCAD/Projects/ Finalized boards for manufacturing.  
190 4107 d 10 h Kevin /KiCAD/Projects/bluetooth_IMU/ Shrunk Bluetooth IMU PCB to 15x26mm from 15x28mm  
189 4107 d 10 h Kevin /KiCAD/ Finished new project for a 12 connector liPo charger.  
188 4110 d 9 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4112 d 2 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4112 d 2 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4115 d 20 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4119 d 20 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4124 d 3 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4126 d 2 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4128 d 16 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4130 d 5 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4131 d 4 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4132 d 4 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4132 d 10 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4133 d 7 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
175 4141 d 14 h Kevin /KiCAD/Libraries/ Removed old parts libraries.  
173 4141 d 14 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  
138 4277 d 16 h Kevin /KiCAD/Projects/ Misc changes.  
137 4319 d 21 h Kevin /KiCAD/Projects/breadboardPowerMain/ Finalized revision A1 for the breadboard PSU.  
136 4319 d 21 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision D0. Removed Tx and Rx LEDs and added a pulldown resistor to C5 and a button to bring C5 high.  
135 4330 d 9 h Kevin /KiCAD/Projects/ Increased annular ring size of headers by 30 mil.
Changed power regulator mounting hole to 150 mil (actual diameter of hole).		  
134 4330 d 12 h Kevin /KiCAD/Projects/breadboardPowerMain/ Changed regulator output capacitor to 805 footprint. Also corrected switch on/off text.  
133 4333 d 14 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision C0 to add a 32.768 Crystal and rerouted board to place some components on the backside.
Replaced the 603 footprints for the 10uF capacitors on the power bridge designs with an 805 footprint.		  
132 4344 d 13 h Kevin /KiCAD/ Finished the design for a breadboard power supply as well as a board to interconnect power rails on the same breadboard and between breadboards.  
131 4344 d 19 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision B0 with the following changes:
- Changed PIC chip profile from SOIC to SSOP
- Changed clock crystal to smaller SMD profile
- Added I2C pullup resistors
- Added LED indicators to pins C0-C2 and C5-C7 (including UART Tx/Rx)
- Added tank capacitor to VCC input		  
125 4369 d 18 h Kevin /KiCAD/ Import of PIC 18F27J13 v.A0 breakout board project.  
124 4369 d 18 h Kevin /KiCAD/ Created folder to hold KiCad files.