Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
245 3854 d 21 h Kevin /KiCAD/ Finished preliminary PCB board layout for the game controller.  
244 3855 d 17 h Kevin /KiCAD/ Added MSP23009 (I2C I/O expander) and TCL59116 (I2C LED driver) chips to the KiCAD library.
Created the schematic for the LED cube game controller board.		  
225 3894 d 1 h Kevin /KiCAD/ Changed the drill size on the RGB LED cube PCB to be slightly larger.  
221 3967 d 6 h Kevin /KiCAD/Libraries/ Updated KiCAD libraries with new parts.  
220 3967 d 8 h Kevin /KiCAD/Projects/bluetooth_IMU/ Updated the BLE IMU board to revision C and replaced the BLE chip with the RN-42 bluetooth module.  
196 4080 d 18 h Kevin /KiCAD/Projects/bluetooth_IMU/ Fixed a wrong entry in the parts list.  
195 4080 d 18 h Kevin /KiCAD/Projects/bluetooth_IMU/ Changed the MAX17043 battery monitor chip to MAX17040 to remove the BGA footprint.
Isolated the programming lines on the PIC by removing an interrupt line from both the accelerometer and gyroscope.
Updated the parts list with the correct parts to order.		  
194 4080 d 23 h Kevin /KiCAD/Libraries/ Updated KiCad libraries with some new parts.  
191 4109 d 5 h Kevin /KiCAD/Projects/ Finalized boards for manufacturing.  
190 4109 d 16 h Kevin /KiCAD/Projects/bluetooth_IMU/ Shrunk Bluetooth IMU PCB to 15x26mm from 15x28mm  
189 4109 d 16 h Kevin /KiCAD/ Finished new project for a 12 connector liPo charger.  
188 4112 d 15 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4114 d 8 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4114 d 8 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4118 d 2 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4122 d 2 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4126 d 9 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4128 d 8 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4130 d 22 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4132 d 11 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4133 d 10 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4134 d 10 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4134 d 16 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4135 d 13 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
175 4143 d 20 h Kevin /KiCAD/Libraries/ Removed old parts libraries.  
173 4143 d 20 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  
138 4279 d 22 h Kevin /KiCAD/Projects/ Misc changes.  
137 4322 d 3 h Kevin /KiCAD/Projects/breadboardPowerMain/ Finalized revision A1 for the breadboard PSU.  
136 4322 d 3 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision D0. Removed Tx and Rx LEDs and added a pulldown resistor to C5 and a button to bring C5 high.  
135 4332 d 15 h Kevin /KiCAD/Projects/ Increased annular ring size of headers by 30 mil.
Changed power regulator mounting hole to 150 mil (actual diameter of hole).		  
134 4332 d 18 h Kevin /KiCAD/Projects/breadboardPowerMain/ Changed regulator output capacitor to 805 footprint. Also corrected switch on/off text.  
133 4335 d 20 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision C0 to add a 32.768 Crystal and rerouted board to place some components on the backside.
Replaced the 603 footprints for the 10uF capacitors on the power bridge designs with an 805 footprint.		  
132 4346 d 19 h Kevin /KiCAD/ Finished the design for a breadboard power supply as well as a board to interconnect power rails on the same breadboard and between breadboards.  
131 4347 d 1 h Kevin /KiCAD/ Updated PIC18F27J13 breakout board to revision B0 with the following changes:
- Changed PIC chip profile from SOIC to SSOP
- Changed clock crystal to smaller SMD profile
- Added I2C pullup resistors
- Added LED indicators to pins C0-C2 and C5-C7 (including UART Tx/Rx)
- Added tank capacitor to VCC input		  
125 4372 d 0 h Kevin /KiCAD/ Import of PIC 18F27J13 v.A0 breakout board project.  
124 4372 d 0 h Kevin /KiCAD/ Created folder to hold KiCad files.