Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
374 3109 d 6 h Kevin /CAD Files/Mitutoyo_Caliper_Case/ Initial import of design files for Mitutoyo caliper case.  
371 3332 d 10 h Kevin /CAD Files/ Profile update as previous previous profile was wrong.  
370 3332 d 21 h Kevin /CAD Files/ Fixed end of print script with missing commands.  
369 3333 d 2 h Kevin /CAD Files/ Fixed a missed setting.  
368 3333 d 3 h Kevin /CAD Files/ Updated custom UM2 Simplify3D profile.  
367 3378 d 3 h Kevin /CAD Files/Paste_Extruder/ Updated NPT adapter to proper tolerances.  
365 3380 d 21 h Kevin /CAD Files/Paste_Extruder/ Added Taz4 mount to paste dispenser.  
361 3395 d 3 h Kevin /CAD Files/Paste_Extruder/ Finalized revision C of paste extruder design.  
360 3395 d 3 h Kevin /CAD Files/Extruder_Fan_Mount/ Lengthened fan mount screw hole length.  
359 3395 d 3 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes to allow printing without use of supports.  
358 3397 d 0 h Kevin /CAD Files/Paste_Extruder/ Updated paste dispenser to revision C.  
357 3404 d 15 h Kevin /CAD Files/Extruder_Fan_Mount/ Updated mount to reflect lower tolerance settings.  
355 3437 d 3 h Kevin /CAD Files/Calibration_Prints/ Import of calibration prints.  
340 3452 d 23 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Added high-torque carrier attachment for gearbox.  
339 3454 d 4 h Kevin /CAD Files/ Updated custom UM2 Simplify3D profile.  
338 3454 d 4 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Initial import of design files for handheld planetary gearbox.  
337 3455 d 20 h Kevin /CAD Files/ Uploaded custom Simplify3D UM2 profile.  
332 3461 d 4 h Kevin /CAD Files/Extruder_Fan_Mount/ Fixed a number of issues and added slots to mount fans via M3 screws and nuts.  
331 3463 d 20 h Kevin /CAD Files/Extruder_Fan_Mount/ Changed fan mount to use M3 screws and nuts for attachment. Also added front text.  
330 3464 d 2 h Kevin /CAD Files/Extruder_Fan_Mount/ Initial import of UM2 fan mount design.  
328 3499 d 3 h Kevin /CAD Files/Paste_Extruder/ Added thread adapters for pressure regulator.  
326 3499 d 3 h Kevin /CAD Files/Paste_Extruder/ Updated paste extruder design to rev. B.  
325 3531 d 22 h Kevin /CAD Files/Paste_Extruder/ Import of files for solder paste extruder design.  
324 3553 d 0 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes for easier assembly.  
323 3554 d 19 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Increased belt spacing from 26.5mm to 27mm to decrease slack.  
322 3561 d 2 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Added an optional variation of the base with a lower profile.  
321 3565 d 2 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added exploded view of extruder.  
320 3565 d 2 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added rendered images for revision F.  
319 3565 d 22 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added design files for revision F of the extruder.  
318 3569 d 5 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Shrunk the hole size for the motor gear for a slightly better fit.  
317 3570 d 23 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Shrunk the hole size for the motor gear for a slightly better fit.  
311 3590 d 4 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Modified a few files to reflect actual dimensions.  
310 3591 d 3 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Minor change to reduce retraction amount when printing with full infill.  
309 3591 d 6 h Kevin /CAD Files/Gears/ Added gearbox design for NEMA17 stepper motors.  
308 3600 d 3 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Widened the center hole for a gear by 0.1mm.  
307 3601 d 12 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Uploaded version of rev. E with herringbone gears.  
306 3603 d 8 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Fixed a few issues with the bottom plate.  
305 3603 d 21 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Added files for revision E of the extruder.  
304 3604 d 23 h Kevin /CAD Files/Belt_Extruder/Rev. D/ Fixed dimensions of disassembly image.  
303 3604 d 23 h Kevin /CAD Files/Belt_Extruder/Rev. D/ Added disassembly image for extruder revision C.