Subversion Repositories Code-Repo

Rev

Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
376 3230 d 4 h Kevin /CAD Files/Mitutoyo_Caliper_Case/ Updated design to utilize magnets for holding end mills.  
375 3253 d 10 h Kevin /CAD Files/Nexus7_NFC_Bracket/ Initial import of design files for Nexus 7 NFC bracket.  
374 3253 d 10 h Kevin /CAD Files/Mitutoyo_Caliper_Case/ Initial import of design files for Mitutoyo caliper case.  
371 3476 d 14 h Kevin /CAD Files/ Profile update as previous previous profile was wrong.  
370 3477 d 2 h Kevin /CAD Files/ Fixed end of print script with missing commands.  
369 3477 d 7 h Kevin /CAD Files/ Fixed a missed setting.  
368 3477 d 7 h Kevin /CAD Files/ Updated custom UM2 Simplify3D profile.  
367 3522 d 8 h Kevin /CAD Files/Paste_Extruder/ Updated NPT adapter to proper tolerances.  
365 3525 d 2 h Kevin /CAD Files/Paste_Extruder/ Added Taz4 mount to paste dispenser.  
361 3539 d 8 h Kevin /CAD Files/Paste_Extruder/ Finalized revision C of paste extruder design.  
360 3539 d 8 h Kevin /CAD Files/Extruder_Fan_Mount/ Lengthened fan mount screw hole length.  
359 3539 d 8 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes to allow printing without use of supports.  
358 3541 d 5 h Kevin /CAD Files/Paste_Extruder/ Updated paste dispenser to revision C.  
357 3548 d 20 h Kevin /CAD Files/Extruder_Fan_Mount/ Updated mount to reflect lower tolerance settings.  
355 3581 d 7 h Kevin /CAD Files/Calibration_Prints/ Import of calibration prints.  
340 3597 d 4 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Added high-torque carrier attachment for gearbox.  
339 3598 d 9 h Kevin /CAD Files/ Updated custom UM2 Simplify3D profile.  
338 3598 d 9 h Kevin /CAD Files/Gears/Handheld_Gearbox/ Initial import of design files for handheld planetary gearbox.  
337 3600 d 1 h Kevin /CAD Files/ Uploaded custom Simplify3D UM2 profile.  
332 3605 d 8 h Kevin /CAD Files/Extruder_Fan_Mount/ Fixed a number of issues and added slots to mount fans via M3 screws and nuts.  
331 3608 d 0 h Kevin /CAD Files/Extruder_Fan_Mount/ Changed fan mount to use M3 screws and nuts for attachment. Also added front text.  
330 3608 d 7 h Kevin /CAD Files/Extruder_Fan_Mount/ Initial import of UM2 fan mount design.  
328 3643 d 8 h Kevin /CAD Files/Paste_Extruder/ Added thread adapters for pressure regulator.  
326 3643 d 8 h Kevin /CAD Files/Paste_Extruder/ Updated paste extruder design to rev. B.  
325 3676 d 3 h Kevin /CAD Files/Paste_Extruder/ Import of files for solder paste extruder design.  
324 3697 d 5 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Minor changes for easier assembly.  
323 3699 d 0 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Increased belt spacing from 26.5mm to 27mm to decrease slack.  
322 3705 d 7 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Added an optional variation of the base with a lower profile.  
321 3709 d 7 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added exploded view of extruder.  
320 3709 d 7 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added rendered images for revision F.  
319 3710 d 3 h Kevin /CAD Files/Belt_Extruder/Rev. F/ Added design files for revision F of the extruder.  
318 3713 d 10 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Shrunk the hole size for the motor gear for a slightly better fit.  
317 3715 d 4 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Shrunk the hole size for the motor gear for a slightly better fit.  
311 3734 d 9 h Kevin /CAD Files/Gears/NEMA17_Gearbox/ Modified a few files to reflect actual dimensions.  
310 3735 d 8 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Minor change to reduce retraction amount when printing with full infill.  
309 3735 d 11 h Kevin /CAD Files/Gears/ Added gearbox design for NEMA17 stepper motors.  
308 3744 d 8 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Widened the center hole for a gear by 0.1mm.  
307 3745 d 17 h Kevin /CAD Files/Belt_Extruder/Rev. E Alt/ Uploaded version of rev. E with herringbone gears.  
306 3747 d 13 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Fixed a few issues with the bottom plate.  
305 3748 d 1 h Kevin /CAD Files/Belt_Extruder/Rev. E/ Added files for revision E of the extruder.