Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
195 4170 d 10 h Kevin /KiCAD/Projects/bluetooth_IMU/ Changed the MAX17043 battery monitor chip to MAX17040 to remove the BGA footprint.
Isolated the programming lines on the PIC by removing an interrupt line from both the accelerometer and gyroscope.
Updated the parts list with the correct parts to order.		  
194 4170 d 14 h Kevin /KiCAD/Libraries/ Updated KiCad libraries with some new parts.  
193 4171 d 9 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Import of PIC32 project for the LED Cube.  
192 4171 d 9 h Kevin /PIC Stuff/PICX_27J13/ Added DMA functionality to the SPI module.  
191 4198 d 20 h Kevin /KiCAD/Projects/ Finalized boards for manufacturing.  
190 4199 d 7 h Kevin /KiCAD/Projects/bluetooth_IMU/ Shrunk Bluetooth IMU PCB to 15x26mm from 15x28mm  
189 4199 d 7 h Kevin /KiCAD/ Finished new project for a 12 connector liPo charger.  
188 4202 d 7 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4203 d 23 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4203 d 23 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4207 d 18 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4211 d 18 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4216 d 0 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4217 d 23 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4220 d 13 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4222 d 2 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4223 d 2 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4224 d 1 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4224 d 7 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4225 d 4 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
175 4233 d 12 h Kevin /KiCAD/Libraries/ Removed old parts libraries.  
174 4233 d 12 h Kevin /CAD Files/Solder_Holder/ Imported design for holding solder rolls in a Hakko solder holder.  
173 4233 d 12 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  
172 4239 d 0 h Kevin /CAD Files/LED_Cube/ Derived some more parts to make assembly easier.  
171 4239 d 13 h Kevin /CAD Files/LED_Cube/ Created two new pieces to help pipeline the bending process.  
170 4240 d 19 h Kevin /CAD Files/LED_Cube/ Created a new piece thats fits over the existing bending tool to ensure consistent results.  
169 4241 d 10 h Kevin /CAD Files/LED_Cube/ Updated the stacking support piece for more consistent printing.  
168 4241 d 19 h Kevin /CAD Files/LED_Cube/ Fixed a few minor details in the design.  
167 4241 d 19 h Kevin /CAD Files/LED_Cube/ Removed excess folder.  
166 4241 d 19 h Kevin /CAD Files/LED_Cube/ Versioned some designs for the 3D LED cube.  
165 4251 d 5 h Kevin /CAD Files/ Imported previously designed CAD projects.  
164 4251 d 6 h Kevin /CAD Files/ Created a folder for holding CAD files from AutoCAD or Inventor.  
163 4251 d 6 h Kevin /PIC Stuff/PICX_12F1840/ Added files for PIC 12F1840:
Added libraries for CPS (capacitive sensing), PWM, Interrupts, and UART for the 8 pin uC.		  
162 4251 d 6 h Kevin /PIC Stuff/PICX_12F1840/ Created folder for holding PIC 12F1840 code.  
161 4251 d 6 h Kevin /PIC Stuff/PICX_27J13/ Wrote a test case that uses RTC, NFC, lux sensor, led backpack, character OLED display, and SSD1331 OLED display.  
160 4293 d 8 h Kevin /PIC Stuff/PICX_27J13/ Wrote library for the DS3231 Real Time Clock.
Added test case to display current time onto OLED character display.		  
159 4294 d 10 h Kevin /PIC Stuff/PICX_27J13/ Wrote basic libraries for interfacing to L3G* and LSM303* sensors.  
158 4296 d 9 h Kevin /PIC Stuff/PICX_27J13/ Changed the file naming to something thats a bit more sortable.  
157 4304 d 12 h Kevin /PIC Stuff/PICX_27J13/ BMP085 sensor and XBee code is now working.
24 bit float/double must be enabled in the configuration.		  
156 4305 d 2 h Kevin /PIC Stuff/PIC_27J13/ Cleaned up header file definitions.