Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
208 4103 d 13 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Minor update of some code in main.c.  
207 4109 d 12 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Updated code to make it easier to see scrolling text.  
206 4109 d 19 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Added code to overlay an array of pixels to the displayed animation. Also implemented a scrolling text feature to the cube.  
205 4110 d 12 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Added code to rotate the cube. Also added two demo loops showing this functionality.  
204 4116 d 15 h Kevin /CAD Files/PSU/ Updated PSU cover piece.  
203 4116 d 19 h Kevin /CAD Files/PSU/ Uploaded initial design for the PSU enclosure for the LED Cube.  
202 4138 d 11 h Kevin /PIC Stuff/PICX_16F1829_BLE_IMU/ Finished writing the library code for UART and I2C for the BLE IMU board.  
201 4144 d 11 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Cleaned up and finished commenting the code.  
200 4147 d 12 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Added functionality to allow changing of refresh rates and brightness settings for the LED cube through the onboard buttons.  
199 4149 d 19 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Finished writing the library for the RGB LED cube for the PIC32MX795XX board.  
198 4165 d 11 h Kevin /PIC Stuff/ Removed the dist and build folder for projects to save space.  
197 4165 d 11 h Kevin /PIC Stuff/PICX_16F1829_BLE_IMU/ Initial import of PIC 16F1829 code for the Bluetooth IMU project.  
196 4165 d 12 h Kevin /KiCAD/Projects/bluetooth_IMU/ Fixed a wrong entry in the parts list.  
195 4165 d 12 h Kevin /KiCAD/Projects/bluetooth_IMU/ Changed the MAX17043 battery monitor chip to MAX17040 to remove the BGA footprint.
Isolated the programming lines on the PIC by removing an interrupt line from both the accelerometer and gyroscope.
Updated the parts list with the correct parts to order.		  
194 4165 d 17 h Kevin /KiCAD/Libraries/ Updated KiCad libraries with some new parts.  
193 4166 d 11 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Import of PIC32 project for the LED Cube.  
192 4166 d 11 h Kevin /PIC Stuff/PICX_27J13/ Added DMA functionality to the SPI module.  
191 4193 d 23 h Kevin /KiCAD/Projects/ Finalized boards for manufacturing.  
190 4194 d 10 h Kevin /KiCAD/Projects/bluetooth_IMU/ Shrunk Bluetooth IMU PCB to 15x26mm from 15x28mm  
189 4194 d 10 h Kevin /KiCAD/ Finished new project for a 12 connector liPo charger.  
188 4197 d 9 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4199 d 1 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4199 d 1 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4202 d 20 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4206 d 20 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4211 d 3 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4213 d 2 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4215 d 16 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4217 d 5 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4218 d 4 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4219 d 3 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4219 d 9 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4220 d 7 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
175 4228 d 14 h Kevin /KiCAD/Libraries/ Removed old parts libraries.  
174 4228 d 14 h Kevin /CAD Files/Solder_Holder/ Imported design for holding solder rolls in a Hakko solder holder.  
173 4228 d 14 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  
172 4234 d 3 h Kevin /CAD Files/LED_Cube/ Derived some more parts to make assembly easier.  
171 4234 d 15 h Kevin /CAD Files/LED_Cube/ Created two new pieces to help pipeline the bending process.  
170 4235 d 21 h Kevin /CAD Files/LED_Cube/ Created a new piece thats fits over the existing bending tool to ensure consistent results.  
169 4236 d 12 h Kevin /CAD Files/LED_Cube/ Updated the stacking support piece for more consistent printing.