Subversion Repositories Code-Repo

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
199 4147 d 15 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Finished writing the library for the RGB LED cube for the PIC32MX795XX board.  
198 4163 d 7 h Kevin /PIC Stuff/ Removed the dist and build folder for projects to save space.  
197 4163 d 7 h Kevin /PIC Stuff/PICX_16F1829_BLE_IMU/ Initial import of PIC 16F1829 code for the Bluetooth IMU project.  
196 4163 d 7 h Kevin /KiCAD/Projects/bluetooth_IMU/ Fixed a wrong entry in the parts list.  
195 4163 d 8 h Kevin /KiCAD/Projects/bluetooth_IMU/ Changed the MAX17043 battery monitor chip to MAX17040 to remove the BGA footprint.
Isolated the programming lines on the PIC by removing an interrupt line from both the accelerometer and gyroscope.
Updated the parts list with the correct parts to order.		  
194 4163 d 13 h Kevin /KiCAD/Libraries/ Updated KiCad libraries with some new parts.  
193 4164 d 7 h Kevin /PIC Stuff/Cerebot_32MX7_LED_Cube/ Import of PIC32 project for the LED Cube.  
192 4164 d 7 h Kevin /PIC Stuff/PICX_27J13/ Added DMA functionality to the SPI module.  
191 4191 d 19 h Kevin /KiCAD/Projects/ Finalized boards for manufacturing.  
190 4192 d 5 h Kevin /KiCAD/Projects/bluetooth_IMU/ Shrunk Bluetooth IMU PCB to 15x26mm from 15x28mm  
189 4192 d 6 h Kevin /KiCAD/ Finished new project for a 12 connector liPo charger.  
188 4195 d 5 h Kevin /KiCAD/ Finished initial layout of the bluetooth IMU board.  
187 4196 d 21 h Kevin /KiCAD/Projects/ Renamed project to reflect the main chip used.
Removed previous old project.		  
186 4196 d 21 h Kevin /KiCAD/Projects/RGB Led Cube (MAX6975)/ Renamed project to reflect the main chip used.  
185 4200 d 16 h Kevin /KiCAD/ Finalized board layout for the RGB Led Cube.  
184 4204 d 16 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Finished v.3 of the LED board. Board layout is optimized for an external power supply.  
183 4208 d 22 h Kevin /KiCAD/Projects/RGB Led Cube 3/ Duplicated the LED cube board to modify it to a 4 layer board using an external power supply.  
182 4210 d 21 h Kevin /KiCAD/ More or less finished the schematic for the bluetooth IMU board.  
181 4213 d 12 h Kevin /KiCAD/ Created a new project for a tiny Bluetooth IMU.  
180 4215 d 0 h Kevin /KiCAD/ Created an alternative LED Cube that uses the TCL5951 chip instead of the MAX6974 for the PWM driver.  
179 4216 d 0 h Kevin /KiCAD/Projects/RGB Led Cube/ Fixed up a few small things and added a rendered image of the board.  
178 4216 d 23 h Kevin /KiCAD/Projects/RGB Led Cube/ Increased the width of high current traces.
Exported each layer as an SVG to allow for easier viewing.		  
177 4217 d 5 h Kevin /KiCAD/ Changed footprints to match the actual parts for the boost circuit.  
176 4218 d 3 h Kevin /KiCAD/ Finished rev. 1 of the PCB for the LED Cube.  
175 4226 d 10 h Kevin /KiCAD/Libraries/ Removed old parts libraries.  
174 4226 d 10 h Kevin /CAD Files/Solder_Holder/ Imported design for holding solder rolls in a Hakko solder holder.  
173 4226 d 10 h Kevin /KiCAD/ Imported new project for the RGB LED cube.
Added EESCHEMA and PCBNEW libraries from http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm.		  
172 4231 d 23 h Kevin /CAD Files/LED_Cube/ Derived some more parts to make assembly easier.  
171 4232 d 11 h Kevin /CAD Files/LED_Cube/ Created two new pieces to help pipeline the bending process.  
170 4233 d 17 h Kevin /CAD Files/LED_Cube/ Created a new piece thats fits over the existing bending tool to ensure consistent results.  
169 4234 d 8 h Kevin /CAD Files/LED_Cube/ Updated the stacking support piece for more consistent printing.  
168 4234 d 17 h Kevin /CAD Files/LED_Cube/ Fixed a few minor details in the design.  
167 4234 d 17 h Kevin /CAD Files/LED_Cube/ Removed excess folder.  
166 4234 d 17 h Kevin /CAD Files/LED_Cube/ Versioned some designs for the 3D LED cube.  
165 4244 d 4 h Kevin /CAD Files/ Imported previously designed CAD projects.  
164 4244 d 4 h Kevin /CAD Files/ Created a folder for holding CAD files from AutoCAD or Inventor.  
163 4244 d 4 h Kevin /PIC Stuff/PICX_12F1840/ Added files for PIC 12F1840:
Added libraries for CPS (capacitive sensing), PWM, Interrupts, and UART for the 8 pin uC.		  
162 4244 d 4 h Kevin /PIC Stuff/PICX_12F1840/ Created folder for holding PIC 12F1840 code.  
161 4244 d 4 h Kevin /PIC Stuff/PICX_27J13/ Wrote a test case that uses RTC, NFC, lux sensor, led backpack, character OLED display, and SSD1331 OLED display.  
160 4286 d 6 h Kevin /PIC Stuff/PICX_27J13/ Wrote library for the DS3231 Real Time Clock.
Added test case to display current time onto OLED character display.