Subversion Repositories Code-Repo

#include <xc.h>
#include <plib.h>
#include "defines.h"
#include "UART1.h"

static UART1_DATA *uart_data_ptr;

void UART1_Init(UART1_DATA *data, void (*rx_callback)(char)) {
    uart_data_ptr = data;
    uart_data_ptr->rx_callback = rx_callback;
    uart_data_ptr->buffer_out_len = 0;
    uart_data_ptr->buffer_out_ind = 0;

    INTDisableInterrupts();

    IEC0CLR   = 0x1C000000; // Disable all UART1 interrupts
    IFS0CLR   = 0x1C000000; // Clear any existing events
    IPC6SET   = 0x00000009; // Set Priority = 2, Subpriority = 1
    
    U1MODE    = 0x00008000; // UART enabled, BRGH = 0
    U1STA     = 0x00009400; // TX interrupt on buffer empty, RX interrupt on buffer not empty
    U1BRG     = 19;         // Set baud rate to 256000 @ 80MHz
    IEC0SET   = 0x0C000000; // Enable the RX and Error interrupts

    INTEnableInterrupts();

    TRISDbits.TRISD14 = 0;
    PORTDbits.RD14 = 0;
}

int UART1_Write(char *string, int length) {
    if (length > UART1_BUFFER_SIZE)
        return 0;
    if (uart_data_ptr->buffer_out_len != 0)
        return 0;

    // Put the data to send into the outbound buffer
    uart_data_ptr->buffer_out_len = length;
    uart_data_ptr->buffer_out_ind = 0;
    int i;
    for (i = 0; i < length; i++) {
        uart_data_ptr->buffer_out[i] = string[i];
    }
    IEC0SET = 0x10000000; // Enable TX interrupt
    return 1;
}

void __ISR(_UART_1_VECTOR, ipl2) __UART_1_Interrupt_Handler(void) {
    PORTDbits.RD14 = 1;
    // Process UART1 error flag
    if (IFS0bits.U1EIF) {
        if (U1STAbits.PERR) { // Process parity error

        }
        if (U1STAbits.FERR) { // Process frame error

        }
        if (U1STAbits.OERR) { // Process receive buffer overrun error
            U1STAbits.OERR = 0; // Clear the overrun error if set
        }
        IFS0CLR = 0x04000000; // Clear the error flag
    }

    // Process UART1 recieve flag
    if (IFS0bits.U1RXIF) {
        // Read the data received from the last transfer
        while (U1STAbits.URXDA) {
            char c = U1RXREG;
            // Call the RX callback function on each received data
            if (uart_data_ptr->rx_callback != NULL) {
                (*uart_data_ptr->rx_callback)(c);
            }
        }
        IFS0CLR = 0x08000000; // Clear the recieve flag
    }

    // Process UART1 transmit flag
    if (IFS0bits.U1TXIF) {
        // Disable the transmit interrupt if all data has been sent
        if (uart_data_ptr->buffer_out_ind == uart_data_ptr->buffer_out_len) {
            IEC0CLR = 0x10000000;
            uart_data_ptr->buffer_out_len = 0;
        } else {
            // Start filling the transmit buffer
            while (!U1STAbits.UTXBF) {
                U1TXREG = uart_data_ptr->buffer_out[uart_data_ptr->buffer_out_ind];
                uart_data_ptr->buffer_out_ind++;
                if (uart_data_ptr->buffer_out_ind == uart_data_ptr->buffer_out_len)
                    break;
            }
        }
        IFS0CLR = 0x10000000; // Clear the transmit flag
    }
    PORTDbits.RD14 = 0;
}