Subversion Repositories Code-Repo

#ifndef I2C1_H
#define I2C1_H

#define MAXI2C1BUF 32

// I2C Operating Speed
#define I2C1_400KHZ              0x0
#define I2C1_100KHZ              0x1

// Operating State
#define I2C1_IDLE                0x1
//#define I2C1_STARTED             0x2
#define I2C1_RCV_DATA            0x3
//#define I2C1_SEND_DATA           0x4
#define I2C1_SEND_ADDR           0x5
#define I2C1_SEND_ADDR_2         0x6
#define I2C1_CHECK_ACK_SEND      0x7
#define I2C1_CHECK_ACK_RECV      0x8
#define I2C1_CHECK_ACK_RESTART   0x9
#define I2C1_REQ_DATA            0xA
#define I2C1_SEND_STOP           0xB
//#define I2C1_SEND_START          0xC
#define I2C1_STOPPED            0xD

// Operating Mode
#define I2C1_MODE_SLAVE          0x10
#define I2C1_MODE_MASTER         0x11

// Master Status
#define I2C1_MASTER_SEND         0x20
#define I2C1_MASTER_RECV         0x21
#define I2C1_MASTER_RESTART      0x22
#define I2C1_MASTER_IDLE         0x23

// Return Status
#define I2C1_SEND_OK             0x30
#define I2C1_SEND_FAIL           0x31
#define I2C1_RECV_OK             0x32
#define I2C1_RECV_FAIL           0x33
#define I2C1_DATA_AVAL           0x34
#define I2C1_ERR_NOADDR          0x35
#define I2C1_ERR_OVERRUN         0x36
#define I2C1_ERR_NODATA          0x37
#define I2C1_ERR_BUFFER_OVERRUN  0x38

typedef struct {
    uint8_t buffer_in[MAXI2C1BUF];
    uint32_t buffer_in_len;
    uint32_t buffer_in_read_ind;
    uint32_t buffer_in_write_ind;

    uint8_t buffer_out[MAXI2C1BUF];
    uint32_t buffer_out_len;
    uint32_t buffer_out_ind;

    uint8_t operating_state;
    uint8_t return_status;

    uint8_t master_dest_addr;
    uint8_t master_status;

    uint8_t slave_in_last_byte;
    uint8_t slave_sending_data;
} I2C1_DATA;

void I2C1_Init(I2C1_DATA *data, uint8_t speed, uint8_t address);
void I2C1_Master_Send(uint8_t address, uint8_t *msg, uint32_t length);
void I2C1_Master_Recv(uint8_t address, uint32_t length);
void I2C1_Master_Restart(uint8_t address, uint8_t msg, uint32_t length);
void I2C1_Interrupt_Master(void);
void I2C1_Interrupt_Slave(void);
uint8_t I2C1_Get_Status(void);
uint8_t I2C1_Buffer_Len(void);
uint8_t I2C1_Read_Buffer(uint8_t *buffer);
uint8_t I2C1_Process_Request(uint8_t);

#endif  /* I2C1_H */