Rev 316 | Blame | Compare with Previous | Last modification | View Log | RSS feed
#include "defines.h"
#include "INTERRUPTS.h"
#include "IOC.h"
#include "SPI.h"
#include "TIMER.h"
void Interrupt_Init() {
}
void Interrupt_Enable() {
// Enable global and peripheral interrupts
INTCONbits.PEIE = 1;
INTCONbits.GIE = 1;
}
void Interrupt_Disable() {
INTCONbits.PEIE = 0;
INTCONbits.GIE = 0;
}
void interrupt InterruptHandler(void) {
// We need to check the interrupt flag of each enabled high-priority interrupt to
// see which device generated this interrupt. Then we can call the correct handler.
if (PIR1bits.TMR2IF) {
TIMER_2_Interrupt_Handler();
PIR1bits.TMR2IF = 0;
return;
}
if (INTCONbits.IOCIF) {
// Call the handler
IOC_Interrupt_Handler();
INTCONbits.IOCIF = 0;
return;
}
}