Rev 261 | Rev 264 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed
#include "defines.h"
#include "CUBE.h"
#include "SPI1.h"
#include "glcdfont.h"
#include "UART1.h"
#include "ETHERNET.h"
static CUBE_DATA *cube_data_ptr;
inline void Cube_Delay() {
// Small delay to ensure that latch speeds are < 30Mhz
Nop();
Nop();
Nop();
}
void Cube_Init(CUBE_DATA *data, uint8_t BC) {
cube_data_ptr = data;
cube_data_ptr->current_layer = 0;
cube_data_ptr->rotation_counter = 0;
cube_data_ptr->frame_state = IDLE;
cube_data_ptr->frame_escape = 0;
SFT_D = 0;
SFT_S = 0;
SFT_K = 0;
SFT_R = 0;
GSLAT = 0;
XBLNK = 0;
SFT_D_TRIS = 0;
SFT_S_TRIS = 0;
SFT_K_TRIS = 0;
SFT_R_TRIS = 0;
GSLAT_TRIS = 0;
XBLNK_TRIS = 0;
// Clear the shift register
Cube_Delay();
SFT_K = 1;
Cube_Delay();
SFT_K = 0;
Cube_Delay();
SFT_S = 1;
Cube_Delay();
SFT_S = 0;
Cube_Delay();
SFT_R = 1;
Cube_Write_DCS(BC);
Cube_Clear();
Cube_Overlay_Clear();
}
void Cube_Timer_Interrupt(void) {
// OR values in the overlay array with the display array
uint8_t i;
uint16_t j;
for (i = 0; i < CUBE_LAYER_COUNT; i++) {
for (j = 0; j < GCS_LAYER_SIZE; j++) {
cube_data_ptr->GCS_WRITE[i][j] = cube_data_ptr->GCS[i][j] | cube_data_ptr->GCS_OVERLAY[i][j];
}
}
// Write to the GCS register
SPI1_Write(cube_data_ptr->GCS_WRITE[cube_data_ptr->current_layer], GCS_LAYER_SIZE, &Cube_GCS_Write_Callback);
}
////////////////////////
// Callback functions //
////////////////////////
void Cube_DCS_Write_Callback(void) {
// GSLAT must be >7ms after DCS write
Delay_MS(7);
GSLAT = 0;
Cube_Delay();
GSLAT = 1;
Cube_Delay();
GSLAT = 0;
}
void Cube_GCS_Write_Callback(void) {
// Disable LED output and latch in written data to GCS
XBLNK = 0;
Cube_Delay();
GSLAT = 1;
// Set the shift register to turn on the current layer
uint8_t i;
for (i = 0; i < CUBE_LAYER_COUNT; i++) {
Cube_Delay();
SFT_D = (i == CUBE_LAYER_COUNT - cube_data_ptr->current_layer - 1) ? 1 : 0;
Cube_Delay();
SFT_K = 1;
Cube_Delay();
SFT_K = 0;
}
Cube_Delay();
SFT_S = 1;
Cube_Delay();
SFT_S = 0;
Cube_Delay();
// Enable LED output
XBLNK = 1;
Cube_Delay();
GSLAT = 0;
cube_data_ptr->current_layer = (cube_data_ptr->current_layer == CUBE_LAYER_COUNT-1)
? 0 : cube_data_ptr->current_layer + 1;
}
////////////////////////////
// Cube control functions //
////////////////////////////
void Cube_Write_DCS(uint8_t BC) {
XBLNK = 0;
uint8_t i,j;
// Write configuration data to the DC/BC/FC/UD registers
uint8_t DCS[GCS_LAYER_SIZE] = {0};
for (i = 0; i < 8; i++) {
uint16_t offset = i * GCS_REG_SIZE;
for (j = 0; j < 21; j++) {
DCS[offset + j] = 0xFF; // Dot correction
}
// Warning: do not set BC > 0x6F ?? NEED TO VERIFY THIS !!
DCS[offset + 21] = BC; // Global red brightness
DCS[offset + 22] = BC; // Global green brightness
DCS[offset + 23] = BC; // Global blue brightness
// DC low range, auto repeat, no timing reset, 8 bit counter mode
DCS[offset + 24] = 0x68; // 0110 1000
}
GSLAT = 1;
SPI1_Write(DCS, GCS_LAYER_SIZE, &Cube_DCS_Write_Callback);
Delay_MS(10); // Delay until the entire DCS write is finished
}
void Cube_Clear(void) {
uint8_t i;
uint16_t j;
for (i = 0; i < CUBE_LAYER_COUNT; i++)
for (j = 0; j < GCS_LAYER_SIZE; j++)
cube_data_ptr->GCS[i][j] = 0x00;
}
void Cube_Set_All(uint16_t R, uint16_t G, uint16_t B) {
// Set all pixels in the cube to the given color
R &= 0x0FFF;
G &= 0x0FFF;
B &= 0x0FFF;
uint8_t i,j,k;
for (i = 0; i < CUBE_LAYER_COUNT; i++) {
for (j = 0; j < CUBE_ROW_COUNT; j++) {
uint16_t j_var = j * GCS_REG_SIZE;
for (k = 0; k < 4; k++) {
uint16_t k_var = j_var + (k * 9);
cube_data_ptr->GCS[i][k_var+0] = R & 0xFF;;
cube_data_ptr->GCS[i][k_var+1] = (G << 4) | (R >> 8);
cube_data_ptr->GCS[i][k_var+2] = G >> 4;
cube_data_ptr->GCS[i][k_var+3] = B & 0xFF;
cube_data_ptr->GCS[i][k_var+4] = (R << 4) | (B >> 8);
cube_data_ptr->GCS[i][k_var+5] = R >> 4;
cube_data_ptr->GCS[i][k_var+6] = G & 0xFF;
cube_data_ptr->GCS[i][k_var+7] = (B << 4) | (G >> 8);
cube_data_ptr->GCS[i][k_var+8] = B >> 4;
}
}
}
}
void Cube_Set_Layer(uint8_t layer, uint16_t R, uint16_t G, uint16_t B) {
// Set all pixels in the specified layer to the given color
R &= 0x0FFF;
G &= 0x0FFF;
B &= 0x0FFF;
uint8_t i,j;
for (i = 0; i < CUBE_ROW_COUNT; i++) {
uint16_t i_var = i * GCS_REG_SIZE;
for (j = 0; j < 4; j++) {
uint16_t j_var = i_var + (j * 9);
cube_data_ptr->GCS[layer][j_var+0] = R & 0xFF;;
cube_data_ptr->GCS[layer][j_var+1] = (G << 4) | (R >> 8);
cube_data_ptr->GCS[layer][j_var+2] = G >> 4;
cube_data_ptr->GCS[layer][j_var+3] = B & 0xFF;
cube_data_ptr->GCS[layer][j_var+4] = (R << 4) | (B >> 8);
cube_data_ptr->GCS[layer][j_var+5] = R >> 4;
cube_data_ptr->GCS[layer][j_var+6] = G & 0xFF;
cube_data_ptr->GCS[layer][j_var+7] = (B << 4) | (G >> 8);
cube_data_ptr->GCS[layer][j_var+8] = B >> 4;
}
}
}
void Cube_Set_Pixel(uint8_t layer, uint8_t row, uint8_t column, uint16_t R, uint16_t G, uint16_t B) {
// Set the specified pixel to the given color
R &= 0x0FFF;
G &= 0x0FFF;
B &= 0x0FFF;
uint16_t var = row * GCS_REG_SIZE + (column / 2 * 9);
switch (column % 2) {
case 0:
cube_data_ptr->GCS[layer][var+0] = R & 0xFF;
cube_data_ptr->GCS[layer][var+1] = (G << 4) | (R >> 8);
cube_data_ptr->GCS[layer][var+2] = G >> 4;
cube_data_ptr->GCS[layer][var+3] = B & 0xFF;
cube_data_ptr->GCS[layer][var+4] = (cube_data_ptr->GCS[layer][var+4] & 0xF0) | (B >> 8);
break;
case 1:
cube_data_ptr->GCS[layer][var+4] = (cube_data_ptr->GCS[layer][var+4] & 0x0F) | (R << 4);
cube_data_ptr->GCS[layer][var+5] = R >> 4;
cube_data_ptr->GCS[layer][var+6] = G & 0xFF;
cube_data_ptr->GCS[layer][var+7] = (B << 4) | (G >> 8);
cube_data_ptr->GCS[layer][var+8] = B >> 4;
break;
}
}
void Cube_Get_Pixel(uint8_t layer, uint8_t row, uint8_t column, uint16_t* R, uint16_t* G, uint16_t* B) {
uint16_t var = row * GCS_REG_SIZE + (column / 2 * 9);
switch (column % 2) {
// Concatenate lower byte and upper byte of each color channel
case 0:
*R = cube_data_ptr->GCS[layer][var+0] | ((cube_data_ptr->GCS[layer][var+1] & 0x0F) << 8);
*G = (cube_data_ptr->GCS[layer][var+1] >> 4) | (cube_data_ptr->GCS[layer][var+2] << 4);
*B = cube_data_ptr->GCS[layer][var+3] | ((cube_data_ptr->GCS[layer][var+4] & 0x0F) << 8);
break;
case 1:
*R = (cube_data_ptr->GCS[layer][var+4] >> 4) | (cube_data_ptr->GCS[layer][var+5] << 4);
*G = cube_data_ptr->GCS[layer][var+6] | ((cube_data_ptr->GCS[layer][var+7] & 0x0F) << 8);
*B = (cube_data_ptr->GCS[layer][var+7] >> 4) | (cube_data_ptr->GCS[layer][var+8] << 4);
break;
}
}
void Cube_Move_Pixel(uint8_t layer1, uint8_t row1, uint8_t column1, uint8_t layer2, uint8_t row2, uint8_t column2) {
// Copies data from pixel 1 to pixel 2
// Note: destination pixel value is overwritten
uint16_t prev_R, prev_G, prev_B;
Cube_Get_Pixel(layer1, row1, column1, &prev_R, &prev_G, &prev_B);
Cube_Set_Pixel(layer2, row2, column2, prev_R, prev_G, prev_B);
}
void Cube_Rotate_Shell(uint8_t shell, uint8_t direction) {
// Shell is the layer to rotate, with the outermost being 0
uint8_t layer;
uint16_t origin_R, origin_G, origin_B;
for (layer = 0; layer < CUBE_LAYER_COUNT; layer++) {
if (direction) {
switch(shell) {
case 0:
// Rotate outermost layer
Cube_Get_Pixel(layer, 0, 0, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 0, 1, layer, 0, 0);
Cube_Move_Pixel(layer, 0, 2, layer, 0, 1);
Cube_Move_Pixel(layer, 0, 3, layer, 0, 2);
Cube_Move_Pixel(layer, 0, 4, layer, 0, 3);
Cube_Move_Pixel(layer, 0, 5, layer, 0, 4);
Cube_Move_Pixel(layer, 0, 6, layer, 0, 5);
Cube_Move_Pixel(layer, 0, 7, layer, 0, 6);
Cube_Move_Pixel(layer, 1, 7, layer, 0, 7);
Cube_Move_Pixel(layer, 2, 7, layer, 1, 7);
Cube_Move_Pixel(layer, 3, 7, layer, 2, 7);
Cube_Move_Pixel(layer, 4, 7, layer, 3, 7);
Cube_Move_Pixel(layer, 5, 7, layer, 4, 7);
Cube_Move_Pixel(layer, 6, 7, layer, 5, 7);
Cube_Move_Pixel(layer, 7, 7, layer, 6, 7);
Cube_Move_Pixel(layer, 7, 6, layer, 7, 7);
Cube_Move_Pixel(layer, 7, 5, layer, 7, 6);
Cube_Move_Pixel(layer, 7, 4, layer, 7, 5);
Cube_Move_Pixel(layer, 7, 3, layer, 7, 4);
Cube_Move_Pixel(layer, 7, 2, layer, 7, 3);
Cube_Move_Pixel(layer, 7, 1, layer, 7, 2);
Cube_Move_Pixel(layer, 7, 0, layer, 7, 1);
Cube_Move_Pixel(layer, 6, 0, layer, 7, 0);
Cube_Move_Pixel(layer, 5, 0, layer, 6, 0);
Cube_Move_Pixel(layer, 4, 0, layer, 5, 0);
Cube_Move_Pixel(layer, 3, 0, layer, 4, 0);
Cube_Move_Pixel(layer, 2, 0, layer, 3, 0);
Cube_Move_Pixel(layer, 1, 0, layer, 2, 0);
Cube_Set_Pixel(layer, 1, 0, origin_R, origin_G, origin_B);
break;
case 1:
// Rotate second to outermost layer
Cube_Get_Pixel(layer, 1, 1, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 1, 2, layer, 1, 1);
Cube_Move_Pixel(layer, 1, 3, layer, 1, 2);
Cube_Move_Pixel(layer, 1, 4, layer, 1, 3);
Cube_Move_Pixel(layer, 1, 5, layer, 1, 4);
Cube_Move_Pixel(layer, 1, 6, layer, 1, 5);
Cube_Move_Pixel(layer, 2, 6, layer, 1, 6);
Cube_Move_Pixel(layer, 3, 6, layer, 2, 6);
Cube_Move_Pixel(layer, 4, 6, layer, 3, 6);
Cube_Move_Pixel(layer, 5, 6, layer, 4, 6);
Cube_Move_Pixel(layer, 6, 6, layer, 5, 6);
Cube_Move_Pixel(layer, 6, 5, layer, 6, 6);
Cube_Move_Pixel(layer, 6, 4, layer, 6, 5);
Cube_Move_Pixel(layer, 6, 3, layer, 6, 4);
Cube_Move_Pixel(layer, 6, 2, layer, 6, 3);
Cube_Move_Pixel(layer, 6, 1, layer, 6, 2);
Cube_Move_Pixel(layer, 5, 1, layer, 6, 1);
Cube_Move_Pixel(layer, 4, 1, layer, 5, 1);
Cube_Move_Pixel(layer, 3, 1, layer, 4, 1);
Cube_Move_Pixel(layer, 2, 1, layer, 3, 1);
Cube_Set_Pixel(layer, 2, 1, origin_R, origin_G, origin_B);
break;
case 2:
// Rotate second to innermost layer
Cube_Get_Pixel(layer, 2, 2, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 2, 3, layer, 2, 2);
Cube_Move_Pixel(layer, 2, 4, layer, 2, 3);
Cube_Move_Pixel(layer, 2, 5, layer, 2, 4);
Cube_Move_Pixel(layer, 3, 5, layer, 2, 5);
Cube_Move_Pixel(layer, 4, 5, layer, 3, 5);
Cube_Move_Pixel(layer, 5, 5, layer, 4, 5);
Cube_Move_Pixel(layer, 5, 4, layer, 5, 5);
Cube_Move_Pixel(layer, 5, 3, layer, 5, 4);
Cube_Move_Pixel(layer, 5, 2, layer, 5, 3);
Cube_Move_Pixel(layer, 4, 2, layer, 5, 2);
Cube_Move_Pixel(layer, 3, 2, layer, 4, 2);
Cube_Set_Pixel(layer, 3, 2, origin_R, origin_G, origin_B);
break;
case 3:
// Rotate innermost layer
Cube_Get_Pixel(layer, 3, 3, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 3, 4, layer, 3, 3);
Cube_Move_Pixel(layer, 4, 4, layer, 3, 4);
Cube_Move_Pixel(layer, 4, 3, layer, 4, 4);
Cube_Set_Pixel(layer, 4, 3, origin_R, origin_G, origin_B);
break;
}
} else {
switch(shell) {
case 0:
// Rotate outermost layer
Cube_Get_Pixel(layer, 0, 0, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 1, 0, layer, 0, 0);
Cube_Move_Pixel(layer, 2, 0, layer, 1, 0);
Cube_Move_Pixel(layer, 3, 0, layer, 2, 0);
Cube_Move_Pixel(layer, 4, 0, layer, 3, 0);
Cube_Move_Pixel(layer, 5, 0, layer, 4, 0);
Cube_Move_Pixel(layer, 6, 0, layer, 5, 0);
Cube_Move_Pixel(layer, 7, 0, layer, 6, 0);
Cube_Move_Pixel(layer, 7, 1, layer, 7, 0);
Cube_Move_Pixel(layer, 7, 2, layer, 7, 1);
Cube_Move_Pixel(layer, 7, 3, layer, 7, 2);
Cube_Move_Pixel(layer, 7, 4, layer, 7, 3);
Cube_Move_Pixel(layer, 7, 5, layer, 7, 4);
Cube_Move_Pixel(layer, 7, 6, layer, 7, 5);
Cube_Move_Pixel(layer, 7, 7, layer, 7, 6);
Cube_Move_Pixel(layer, 6, 7, layer, 7, 7);
Cube_Move_Pixel(layer, 5, 7, layer, 6, 7);
Cube_Move_Pixel(layer, 4, 7, layer, 5, 7);
Cube_Move_Pixel(layer, 3, 7, layer, 4, 7);
Cube_Move_Pixel(layer, 2, 7, layer, 3, 7);
Cube_Move_Pixel(layer, 1, 7, layer, 2, 7);
Cube_Move_Pixel(layer, 0, 7, layer, 1, 7);
Cube_Move_Pixel(layer, 0, 6, layer, 0, 7);
Cube_Move_Pixel(layer, 0, 5, layer, 0, 6);
Cube_Move_Pixel(layer, 0, 4, layer, 0, 5);
Cube_Move_Pixel(layer, 0, 3, layer, 0, 4);
Cube_Move_Pixel(layer, 0, 2, layer, 0, 3);
Cube_Move_Pixel(layer, 0, 1, layer, 0, 2);
Cube_Set_Pixel(layer, 0, 1, origin_R, origin_G, origin_B);
break;
case 1:
// Rotate second to outermost layer
Cube_Get_Pixel(layer, 1, 1, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 2, 1, layer, 1, 1);
Cube_Move_Pixel(layer, 3, 1, layer, 2, 1);
Cube_Move_Pixel(layer, 4, 1, layer, 3, 1);
Cube_Move_Pixel(layer, 5, 1, layer, 4, 1);
Cube_Move_Pixel(layer, 6, 1, layer, 5, 1);
Cube_Move_Pixel(layer, 6, 2, layer, 6, 1);
Cube_Move_Pixel(layer, 6, 3, layer, 6, 2);
Cube_Move_Pixel(layer, 6, 4, layer, 6, 3);
Cube_Move_Pixel(layer, 6, 5, layer, 6, 4);
Cube_Move_Pixel(layer, 6, 6, layer, 6, 5);
Cube_Move_Pixel(layer, 5, 6, layer, 6, 6);
Cube_Move_Pixel(layer, 4, 6, layer, 5, 6);
Cube_Move_Pixel(layer, 3, 6, layer, 4, 6);
Cube_Move_Pixel(layer, 2, 6, layer, 3, 6);
Cube_Move_Pixel(layer, 1, 6, layer, 2, 6);
Cube_Move_Pixel(layer, 1, 5, layer, 1, 6);
Cube_Move_Pixel(layer, 1, 4, layer, 1, 5);
Cube_Move_Pixel(layer, 1, 3, layer, 1, 4);
Cube_Move_Pixel(layer, 1, 2, layer, 1, 3);
Cube_Set_Pixel(layer, 1, 2, origin_R, origin_G, origin_B);
break;
case 2:
// Rotate second to innermost layer
Cube_Get_Pixel(layer, 2, 2, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 3, 2, layer, 2, 2);
Cube_Move_Pixel(layer, 4, 2, layer, 3, 2);
Cube_Move_Pixel(layer, 5, 2, layer, 4, 2);
Cube_Move_Pixel(layer, 5, 3, layer, 5, 2);
Cube_Move_Pixel(layer, 5, 4, layer, 5, 3);
Cube_Move_Pixel(layer, 5, 5, layer, 5, 4);
Cube_Move_Pixel(layer, 4, 5, layer, 5, 5);
Cube_Move_Pixel(layer, 3, 5, layer, 4, 5);
Cube_Move_Pixel(layer, 2, 5, layer, 3, 5);
Cube_Move_Pixel(layer, 2, 4, layer, 2, 5);
Cube_Move_Pixel(layer, 2, 3, layer, 2, 4);
Cube_Set_Pixel(layer, 2, 3, origin_R, origin_G, origin_B);
break;
case 3:
// Rotate innermost layer
Cube_Get_Pixel(layer, 3, 3, &origin_R, &origin_G, &origin_B);
Cube_Move_Pixel(layer, 4, 3, layer, 3, 3);
Cube_Move_Pixel(layer, 4, 4, layer, 4, 3);
Cube_Move_Pixel(layer, 3, 4, layer, 4, 4);
Cube_Set_Pixel(layer, 3, 4, origin_R, origin_G, origin_B);
break;
}
}
}
}
void Cube_Rotate(uint8_t direction) {
// Rotate outermost layer
Cube_Rotate_Shell(0, direction);
// Rotate second to outermost layer
if ((cube_data_ptr->rotation_counter != 1) && (cube_data_ptr->rotation_counter != 5)) {
Cube_Rotate_Shell(1, direction);
}
// Rotate second to innermost layer
if ((cube_data_ptr->rotation_counter != 0) && (cube_data_ptr->rotation_counter != 2) &&
(cube_data_ptr->rotation_counter != 4) && (cube_data_ptr->rotation_counter != 6)) {
Cube_Rotate_Shell(2, direction);
}
// Rotate innermost layer
if ((cube_data_ptr->rotation_counter == 3) || (cube_data_ptr->rotation_counter == 7)) {
Cube_Rotate_Shell(3, direction);
}
if (direction == 0) {
cube_data_ptr->rotation_counter = (cube_data_ptr->rotation_counter == CUBE_ROTATIONS - 1)
? 0 : cube_data_ptr->rotation_counter + 1;
} else {
cube_data_ptr->rotation_counter = (cube_data_ptr->rotation_counter == 0)
? CUBE_ROTATIONS - 1 : cube_data_ptr->rotation_counter - 1;
}
}
///////////////////////////////
// Overlay control functions //
///////////////////////////////
void Cube_Overlay_Clear(void) {
uint16_t i,j;
for (i = 0; i < CUBE_LAYER_COUNT; i++) {
for (j = 0; j < GCS_LAYER_SIZE; j++) {
cube_data_ptr->GCS_OVERLAY[i][j] = 0x00;
}
}
}
void Cube_Overlay_Set_Pixel(uint8_t layer, uint8_t row, uint8_t column, uint16_t R, uint16_t G, uint16_t B) {
// Set the specified pixel to the given color
R &= 0x0FFF;
G &= 0x0FFF;
B &= 0x0FFF;
uint16_t var = row * GCS_REG_SIZE + (column / 2 * 9);
switch (column % 2) {
case 0:
cube_data_ptr->GCS_OVERLAY[layer][var+0] = R & 0xFF;
cube_data_ptr->GCS_OVERLAY[layer][var+1] = (G << 4) | (R >> 8);
cube_data_ptr->GCS_OVERLAY[layer][var+2] = G >> 4;
cube_data_ptr->GCS_OVERLAY[layer][var+3] = B & 0xFF;
cube_data_ptr->GCS_OVERLAY[layer][var+4] = (cube_data_ptr->GCS_OVERLAY[layer][var+4] & 0xF0) | (B >> 8);
break;
case 1:
cube_data_ptr->GCS_OVERLAY[layer][var+4] = (cube_data_ptr->GCS_OVERLAY[layer][var+4] & 0x0F) | (R << 4);
cube_data_ptr->GCS_OVERLAY[layer][var+5] = R >> 4;
cube_data_ptr->GCS_OVERLAY[layer][var+6] = G & 0xFF;
cube_data_ptr->GCS_OVERLAY[layer][var+7] = (B << 4) | (G >> 8);
cube_data_ptr->GCS_OVERLAY[layer][var+8] = B >> 4;
break;
}
}
void Cube_Overlay_Get_Pixel(uint8_t layer, uint8_t row, uint8_t column, uint16_t* R, uint16_t* G, uint16_t* B) {
uint16_t var = row * GCS_REG_SIZE + (column / 2 * 9);
switch (column % 2) {
// Concatenate lower byte and upper byte of each color channel
case 0:
*R = cube_data_ptr->GCS_OVERLAY[layer][var+0] | ((cube_data_ptr->GCS_OVERLAY[layer][var+1] & 0x0F) << 8);
*G = (cube_data_ptr->GCS_OVERLAY[layer][var+1] >> 4) | (cube_data_ptr->GCS_OVERLAY[layer][var+2] << 4);
*B = cube_data_ptr->GCS_OVERLAY[layer][var+3] | ((cube_data_ptr->GCS_OVERLAY[layer][var+4] & 0x0F) << 8);
break;
case 1:
*R = (cube_data_ptr->GCS_OVERLAY[layer][var+4] >> 4) | (cube_data_ptr->GCS_OVERLAY[layer][var+5] << 4);
*G = cube_data_ptr->GCS_OVERLAY[layer][var+6] | ((cube_data_ptr->GCS_OVERLAY[layer][var+7] & 0x0F) << 8);
*B = (cube_data_ptr->GCS_OVERLAY[layer][var+7] >> 4) | (cube_data_ptr->GCS_OVERLAY[layer][var+8] << 4);
break;
}
}
void Cube_Overlay_Move_Pixel(uint8_t layer1, uint8_t row1, uint8_t column1, uint8_t layer2, uint8_t row2, uint8_t column2) {
// Copies data from pixel 1 to pixel 2
// Note: destination pixel value is overwritten
uint16_t prev_R, prev_G, prev_B;
Cube_Overlay_Get_Pixel(layer1, row1, column1, &prev_R, &prev_G, &prev_B);
Cube_Overlay_Set_Pixel(layer2, row2, column2, prev_R, prev_G, prev_B);
}
void Cube_Overlay_Rotate_Shell(uint8_t shell, uint8_t direction) {
// Shell is the layer to rotate, with the outermost being 0
uint8_t layer;
uint16_t origin_R, origin_G, origin_B;;
for (layer = 0; layer < CUBE_LAYER_COUNT; layer++) {
if (direction) {
switch(shell) {
case 0:
// Rotate outermost layer
Cube_Overlay_Get_Pixel(layer, 0, 0, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 0, 1, layer, 0, 0);
Cube_Overlay_Move_Pixel(layer, 0, 2, layer, 0, 1);
Cube_Overlay_Move_Pixel(layer, 0, 3, layer, 0, 2);
Cube_Overlay_Move_Pixel(layer, 0, 4, layer, 0, 3);
Cube_Overlay_Move_Pixel(layer, 0, 5, layer, 0, 4);
Cube_Overlay_Move_Pixel(layer, 0, 6, layer, 0, 5);
Cube_Overlay_Move_Pixel(layer, 0, 7, layer, 0, 6);
Cube_Overlay_Move_Pixel(layer, 1, 7, layer, 0, 7);
Cube_Overlay_Move_Pixel(layer, 2, 7, layer, 1, 7);
Cube_Overlay_Move_Pixel(layer, 3, 7, layer, 2, 7);
Cube_Overlay_Move_Pixel(layer, 4, 7, layer, 3, 7);
Cube_Overlay_Move_Pixel(layer, 5, 7, layer, 4, 7);
Cube_Overlay_Move_Pixel(layer, 6, 7, layer, 5, 7);
Cube_Overlay_Move_Pixel(layer, 7, 7, layer, 6, 7);
Cube_Overlay_Move_Pixel(layer, 7, 6, layer, 7, 7);
Cube_Overlay_Move_Pixel(layer, 7, 5, layer, 7, 6);
Cube_Overlay_Move_Pixel(layer, 7, 4, layer, 7, 5);
Cube_Overlay_Move_Pixel(layer, 7, 3, layer, 7, 4);
Cube_Overlay_Move_Pixel(layer, 7, 2, layer, 7, 3);
Cube_Overlay_Move_Pixel(layer, 7, 1, layer, 7, 2);
Cube_Overlay_Move_Pixel(layer, 7, 0, layer, 7, 1);
Cube_Overlay_Move_Pixel(layer, 6, 0, layer, 7, 0);
Cube_Overlay_Move_Pixel(layer, 5, 0, layer, 6, 0);
Cube_Overlay_Move_Pixel(layer, 4, 0, layer, 5, 0);
Cube_Overlay_Move_Pixel(layer, 3, 0, layer, 4, 0);
Cube_Overlay_Move_Pixel(layer, 2, 0, layer, 3, 0);
Cube_Overlay_Move_Pixel(layer, 1, 0, layer, 2, 0);
Cube_Overlay_Set_Pixel(layer, 1, 0, origin_R, origin_G, origin_B);
break;
case 1:
// Rotate second to outermost layer
Cube_Overlay_Get_Pixel(layer, 1, 1, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 1, 2, layer, 1, 1);
Cube_Overlay_Move_Pixel(layer, 1, 3, layer, 1, 2);
Cube_Overlay_Move_Pixel(layer, 1, 4, layer, 1, 3);
Cube_Overlay_Move_Pixel(layer, 1, 5, layer, 1, 4);
Cube_Overlay_Move_Pixel(layer, 1, 6, layer, 1, 5);
Cube_Overlay_Move_Pixel(layer, 2, 6, layer, 1, 6);
Cube_Overlay_Move_Pixel(layer, 3, 6, layer, 2, 6);
Cube_Overlay_Move_Pixel(layer, 4, 6, layer, 3, 6);
Cube_Overlay_Move_Pixel(layer, 5, 6, layer, 4, 6);
Cube_Overlay_Move_Pixel(layer, 6, 6, layer, 5, 6);
Cube_Overlay_Move_Pixel(layer, 6, 5, layer, 6, 6);
Cube_Overlay_Move_Pixel(layer, 6, 4, layer, 6, 5);
Cube_Overlay_Move_Pixel(layer, 6, 3, layer, 6, 4);
Cube_Overlay_Move_Pixel(layer, 6, 2, layer, 6, 3);
Cube_Overlay_Move_Pixel(layer, 6, 1, layer, 6, 2);
Cube_Overlay_Move_Pixel(layer, 5, 1, layer, 6, 1);
Cube_Overlay_Move_Pixel(layer, 4, 1, layer, 5, 1);
Cube_Overlay_Move_Pixel(layer, 3, 1, layer, 4, 1);
Cube_Overlay_Move_Pixel(layer, 2, 1, layer, 3, 1);
Cube_Overlay_Set_Pixel(layer, 2, 1, origin_R, origin_G, origin_B);
break;
case 2:
// Rotate second to innermost layer
Cube_Overlay_Get_Pixel(layer, 2, 2, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 2, 3, layer, 2, 2);
Cube_Overlay_Move_Pixel(layer, 2, 4, layer, 2, 3);
Cube_Overlay_Move_Pixel(layer, 2, 5, layer, 2, 4);
Cube_Overlay_Move_Pixel(layer, 3, 5, layer, 2, 5);
Cube_Overlay_Move_Pixel(layer, 4, 5, layer, 3, 5);
Cube_Overlay_Move_Pixel(layer, 5, 5, layer, 4, 5);
Cube_Overlay_Move_Pixel(layer, 5, 4, layer, 5, 5);
Cube_Overlay_Move_Pixel(layer, 5, 3, layer, 5, 4);
Cube_Overlay_Move_Pixel(layer, 5, 2, layer, 5, 3);
Cube_Overlay_Move_Pixel(layer, 4, 2, layer, 5, 2);
Cube_Overlay_Move_Pixel(layer, 3, 2, layer, 4, 2);
Cube_Overlay_Set_Pixel(layer, 3, 2, origin_R, origin_G, origin_B);
break;
case 3:
// Rotate innermost layer
Cube_Overlay_Get_Pixel(layer, 3, 3, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 3, 4, layer, 3, 3);
Cube_Overlay_Move_Pixel(layer, 4, 4, layer, 3, 4);
Cube_Overlay_Move_Pixel(layer, 4, 3, layer, 4, 4);
Cube_Overlay_Set_Pixel(layer, 4, 3, origin_R, origin_G, origin_B);
break;
}
} else {
switch(shell) {
case 0:
// Rotate outermost layer
Cube_Overlay_Get_Pixel(layer, 0, 0, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 1, 0, layer, 0, 0);
Cube_Overlay_Move_Pixel(layer, 2, 0, layer, 1, 0);
Cube_Overlay_Move_Pixel(layer, 3, 0, layer, 2, 0);
Cube_Overlay_Move_Pixel(layer, 4, 0, layer, 3, 0);
Cube_Overlay_Move_Pixel(layer, 5, 0, layer, 4, 0);
Cube_Overlay_Move_Pixel(layer, 6, 0, layer, 5, 0);
Cube_Overlay_Move_Pixel(layer, 7, 0, layer, 6, 0);
Cube_Overlay_Move_Pixel(layer, 7, 1, layer, 7, 0);
Cube_Overlay_Move_Pixel(layer, 7, 2, layer, 7, 1);
Cube_Overlay_Move_Pixel(layer, 7, 3, layer, 7, 2);
Cube_Overlay_Move_Pixel(layer, 7, 4, layer, 7, 3);
Cube_Overlay_Move_Pixel(layer, 7, 5, layer, 7, 4);
Cube_Overlay_Move_Pixel(layer, 7, 6, layer, 7, 5);
Cube_Overlay_Move_Pixel(layer, 7, 7, layer, 7, 6);
Cube_Overlay_Move_Pixel(layer, 6, 7, layer, 7, 7);
Cube_Overlay_Move_Pixel(layer, 5, 7, layer, 6, 7);
Cube_Overlay_Move_Pixel(layer, 4, 7, layer, 5, 7);
Cube_Overlay_Move_Pixel(layer, 3, 7, layer, 4, 7);
Cube_Overlay_Move_Pixel(layer, 2, 7, layer, 3, 7);
Cube_Overlay_Move_Pixel(layer, 1, 7, layer, 2, 7);
Cube_Overlay_Move_Pixel(layer, 0, 7, layer, 1, 7);
Cube_Overlay_Move_Pixel(layer, 0, 6, layer, 0, 7);
Cube_Overlay_Move_Pixel(layer, 0, 5, layer, 0, 6);
Cube_Overlay_Move_Pixel(layer, 0, 4, layer, 0, 5);
Cube_Overlay_Move_Pixel(layer, 0, 3, layer, 0, 4);
Cube_Overlay_Move_Pixel(layer, 0, 2, layer, 0, 3);
Cube_Overlay_Move_Pixel(layer, 0, 1, layer, 0, 2);
Cube_Overlay_Set_Pixel(layer, 0, 1, origin_R, origin_G, origin_B);
break;
case 1:
// Rotate second to outermost layer
Cube_Overlay_Get_Pixel(layer, 1, 1, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 2, 1, layer, 1, 1);
Cube_Overlay_Move_Pixel(layer, 3, 1, layer, 2, 1);
Cube_Overlay_Move_Pixel(layer, 4, 1, layer, 3, 1);
Cube_Overlay_Move_Pixel(layer, 5, 1, layer, 4, 1);
Cube_Overlay_Move_Pixel(layer, 6, 1, layer, 5, 1);
Cube_Overlay_Move_Pixel(layer, 6, 2, layer, 6, 1);
Cube_Overlay_Move_Pixel(layer, 6, 3, layer, 6, 2);
Cube_Overlay_Move_Pixel(layer, 6, 4, layer, 6, 3);
Cube_Overlay_Move_Pixel(layer, 6, 5, layer, 6, 4);
Cube_Overlay_Move_Pixel(layer, 6, 6, layer, 6, 5);
Cube_Overlay_Move_Pixel(layer, 5, 6, layer, 6, 6);
Cube_Overlay_Move_Pixel(layer, 4, 6, layer, 5, 6);
Cube_Overlay_Move_Pixel(layer, 3, 6, layer, 4, 6);
Cube_Overlay_Move_Pixel(layer, 2, 6, layer, 3, 6);
Cube_Overlay_Move_Pixel(layer, 1, 6, layer, 2, 6);
Cube_Overlay_Move_Pixel(layer, 1, 5, layer, 1, 6);
Cube_Overlay_Move_Pixel(layer, 1, 4, layer, 1, 5);
Cube_Overlay_Move_Pixel(layer, 1, 3, layer, 1, 4);
Cube_Overlay_Move_Pixel(layer, 1, 2, layer, 1, 3);
Cube_Overlay_Set_Pixel(layer, 1, 2, origin_R, origin_G, origin_B);
break;
case 2:
// Rotate second to innermost layer
Cube_Overlay_Get_Pixel(layer, 2, 2, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 3, 2, layer, 2, 2);
Cube_Overlay_Move_Pixel(layer, 4, 2, layer, 3, 2);
Cube_Overlay_Move_Pixel(layer, 5, 2, layer, 4, 2);
Cube_Overlay_Move_Pixel(layer, 5, 3, layer, 5, 2);
Cube_Overlay_Move_Pixel(layer, 5, 4, layer, 5, 3);
Cube_Overlay_Move_Pixel(layer, 5, 5, layer, 5, 4);
Cube_Overlay_Move_Pixel(layer, 4, 5, layer, 5, 5);
Cube_Overlay_Move_Pixel(layer, 3, 5, layer, 4, 5);
Cube_Overlay_Move_Pixel(layer, 2, 5, layer, 3, 5);
Cube_Overlay_Move_Pixel(layer, 2, 4, layer, 2, 5);
Cube_Overlay_Move_Pixel(layer, 2, 3, layer, 2, 4);
Cube_Overlay_Set_Pixel(layer, 2, 3, origin_R, origin_G, origin_B);
break;
case 3:
// Rotate innermost layer
Cube_Overlay_Get_Pixel(layer, 3, 3, &origin_R, &origin_G, &origin_B);
Cube_Overlay_Move_Pixel(layer, 4, 3, layer, 3, 3);
Cube_Overlay_Move_Pixel(layer, 4, 4, layer, 4, 3);
Cube_Overlay_Move_Pixel(layer, 3, 4, layer, 4, 4);
Cube_Overlay_Set_Pixel(layer, 3, 4, origin_R, origin_G, origin_B);
break;
}
}
}
}
////////////////////////////
// Text control functions //
////////////////////////////
void Cube_Text_Init(uint8_t *string, uint8_t length, uint16_t R, uint16_t G, uint16_t B) {
// Ensure that the length of the string does not exceed the storage buffer
if (length > CUBE_STRING_MAX_LENGTH) length = CUBE_STRING_MAX_LENGTH;
Cube_Overlay_Clear();
// Copy the passed data into the buffer
uint8_t i;
for (i = 0; i < length; i++)
cube_data_ptr->string[i] = string[i];
cube_data_ptr->string_length = length;
cube_data_ptr->string_index = 0;
cube_data_ptr->string_line = 0;
cube_data_ptr->string_R = R;
cube_data_ptr->string_G = G;
cube_data_ptr->string_B = B;
}
void Cube_Text_Interrupt(void) {
uint8_t layer;
uint16_t line;
// Rotate before drawing the new line at (0,0)
Cube_Overlay_Rotate_Shell(0, 0);
// Get the next vertical line of the int8_tacter currently being drawn
if (cube_data_ptr->string_line == 5) {
line = 0x0; // Leave a space between int8_tacters
} else {
line = font[(cube_data_ptr->string[cube_data_ptr->string_index] * 5)
+ cube_data_ptr->string_line];
}
// Draw the line onto (0,0) using the specified color
for (layer = 8; layer != 0; layer--) {
if (line & 0x1) {
Cube_Overlay_Set_Pixel(layer-1, 0, 0, cube_data_ptr->string_R,
cube_data_ptr->string_G, cube_data_ptr->string_B);
} else {
Cube_Overlay_Set_Pixel(layer-1, 0, 0, 0x00, 0x00, 0x00);
}
line >>= 1;
}
// Increment the vertical line and the int8_tacter as needed
if (cube_data_ptr->string_line == 5) {
cube_data_ptr->string_line = 0;
if (cube_data_ptr->string_index == cube_data_ptr->string_length-1) {
cube_data_ptr->string_index = 0;
} else {
cube_data_ptr->string_index += 1;
}
} else {
cube_data_ptr->string_line += 1;
}
}
/////////////////////////////////////////////
// Functions for processing streaming data //
/////////////////////////////////////////////
void Cube_Data_In(uint8_t c) {
// Reset upon receiving the start int8_t
if (c == CUBE_START_CHAR) {
cube_data_ptr->frame_length = 0;
cube_data_ptr->frame_index = 0;
cube_data_ptr->frame_checksum = 0;
cube_data_ptr->frame_command = 0;
cube_data_ptr->frame_escape = 0;
cube_data_ptr->frame_state = READ_LENGTH_MSB;
return;
}
// If the input is the escape int8_t, XOR the next int8_t received
if (c == CUBE_ESCAPE_CHAR) {
cube_data_ptr->frame_escape = 1;
return;
}
// XOR the input int8_t if needed
if (cube_data_ptr->frame_escape) {
c ^= CUBE_ESCAPE_XOR;
cube_data_ptr->frame_escape = 0;
}
// Process data
switch (cube_data_ptr->frame_state) {
case IDLE:
// Reflect the int8_tacter back to the transmitter
UART1_Write(&c, 1);
break;
case READ_LENGTH_MSB: // Save MSB of length
cube_data_ptr->frame_length |= (c << 8);
cube_data_ptr->frame_state = READ_LENGTH_LSB;
break;
case READ_LENGTH_LSB: // Save LSB of length
cube_data_ptr->frame_length |= c;
cube_data_ptr->frame_state = READ_COMMAND;
break;
case READ_COMMAND: // Store the command byte
cube_data_ptr->frame_checksum += c;
cube_data_ptr->frame_command = c;
if (cube_data_ptr->frame_length == 1)
cube_data_ptr->frame_state = READ_CHECKSUM;
else
cube_data_ptr->frame_state = READ_DATA;
break;
case READ_DATA: // Read the passed data into the buffer
cube_data_ptr->frame_checksum += c;
cube_data_ptr->frame_buffer[cube_data_ptr->frame_index] = c;
cube_data_ptr->frame_index++;
if (cube_data_ptr->frame_index == cube_data_ptr->frame_length - 1)
cube_data_ptr->frame_state = READ_CHECKSUM;
break;
case READ_CHECKSUM: // Process frame if checksum is valid
cube_data_ptr->frame_checksum = 0xFF - cube_data_ptr->frame_checksum;
if (cube_data_ptr->frame_checksum == c) {
Cube_Data_In_Process_Frame();
}
cube_data_ptr->frame_state = IDLE;
cube_data_ptr->frame_index = 0;
cube_data_ptr->frame_length = 0;
break;
default:
break;
}
}
void Cube_Data_In_Process_Frame(void) {
// Here we process received frames depending on the command
uint8_t *frame = cube_data_ptr->frame_buffer;
switch (cube_data_ptr->frame_command) {
case CUBE_COMMAND_SET_BC:
TIMER5_Stop();
Delay_MS(1); // Need to wait for all SPI writes to complete
Cube_Write_DCS(frame[0]);
TIMER5_Start();
break;
case CUBE_COMMAND_CLEAR:
Cube_Clear();
break;
case CUBE_COMMAND_SET_PIXEL:
Cube_Set_Pixel(frame[0], frame[1], frame[2], frame[3], frame[4], frame[5]);
break;
case CUBE_COMMAND_SET_ALL:
Cube_Data_Direct_Write_All(&frame[0]);
break;
case CUBE_COMMAND_START_TEXT:
Cube_Text_Init(&frame[3], cube_data_ptr->frame_length - 4, frame[0], frame[1], frame[2]);
TIMER4_Start();
break;
case CUBE_COMMAND_STOP_TEXT:
TIMER4_Stop();
Cube_Overlay_Clear();
break;
default:
break;
}
}
void Cube_Data_Direct_Write_All(uint8_t *buffer) {
memcpy(cube_data_ptr->GCS, buffer, CUBE_LAYER_COUNT * GCS_LAYER_SIZE);
}
void Cube_Ethernet_Frame_In(void) {
uint8_t i,j,k;
uint8_t buffer[2048] = {0};
uint16_t length;
uint16_t index = 1;
// Read and process the ethernet packet
if (!ETH_Read_Packet(buffer, &length)) {
// Check the opcode (first byte) to determine what to do
if (buffer[0] == 0x1) { // 0x1 - Reset into Ethernet mode
Reset_Board(BOARD_MODE_ETHERNET);
} else if (buffer[0] == 0x2) { // 0x2 - Reset back to idle mode
Reset_Board(BOARD_MODE_IDLE);
} else if (buffer[0] == 0xA) { // 0xA - Clear the entire cube
Cube_Clear();
} else if (buffer[0] == 0xB) { // 0xB - Set the global brightness value
Cube_Write_DCS(buffer[1]);
} else if (buffer[0] == 0xC) { // 0xC - Set the entire cube
if (length == 0x0601) {
ClearWDT();
for (i = 0; i < CUBE_LAYER_COUNT; i++) {
for (j = 0; j < CUBE_COLUMN_COUNT; j++) {
for (k = 0; k < CUBE_ROW_COUNT; k++) {
Cube_Set_Pixel(i, k, j, buffer[index], buffer[index+1], buffer[index+2]);
index = index + 3;
}
}
}
}
} else if (buffer[0] == 0xD) { // 0xD - Rotate the cube
Cube_Rotate(buffer[1]);
} else if (buffer[0] == 0xE) { // 0xE - Rotate a layer
Cube_Rotate_Shell(buffer[1], buffer[2]);
}
}
}