| /CAD Files/Belt_Extruder/Rev. F/Back_Panel.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Back_Panel.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_16mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_16mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_8mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_8mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_A_8mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_A_8mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_A_8mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_A_8mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_B_8mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_B_8mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_B_8mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bearing_Center_Part_B_8mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Belt_4in.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Belt_4in.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gear22.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gear22.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Belt_Gear_Assembly.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bottom_Plate_Rev_6.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bottom_Plate_Rev_6.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Bottom_Plate_Rev_6.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Bottom_Plate_Rev_6.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Arm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Arm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Arm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Arm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6/Design Accelerator/Compress Spring1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6/Design Accelerator/Compress Spring1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6/Design Accelerator/Compress Spring11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6/Design Accelerator/Compress Spring11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6/Design Accelerator/lockfile.lck |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6/Design Accelerator/lockfile.lck |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6.idw |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6.idw |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6.ipn |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Extruder_Assembly_Rev_6.ipn |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_15x4mm_0.8mm_40deg_CCW.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_15x4mm_0.8mm_40deg_CCW.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_15x4mm_0.8mm_40deg_CCW.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_15x4mm_0.8mm_40deg_CCW.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Assembly.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Hobbed_Gear.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Hobbed_Gear.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Nut_M3_1.6mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Nut_M3_1.6mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Nut_M3_2.35mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Nut_M3_2.35mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Screw_M3_16mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Screw_M3_16mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Screw_M3_20mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Screw_M3_20mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Screw_M3_25mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Screw_M3_25mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Spacer_6mm_3.4mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Spacer_6mm_3.4mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Stepper_Motor.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Stepper_Motor.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Thumbs.db |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Thumbs.db |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Top_Plate_Rev_6.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Top_Plate_Rev_6.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Top_Plate_Rev_6.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Top_Plate_Rev_6.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Washer_3mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Washer_3mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. F/Washer_5mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. F/Washer_5mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |