| /CAD Files/Belt_Extruder/Rev. C/Back_Panel.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Back_Panel.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Bearing.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Bearing.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Bearing_16mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Bearing_16mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Bearing_8mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Bearing_8mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_4in.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_4in.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0002.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0002.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear22.0001.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear22.0001.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0002.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0002.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gear22.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gear22.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Belt_Gear_Assembly.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Bottom_Plate_Rev_3.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Bottom_Plate_Rev_3.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Bottom_Plate_Rev_3.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Bottom_Plate_Rev_3.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Arm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Arm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Arm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Arm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3/Design Accelerator/Compress Spring1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3/Design Accelerator/Compress Spring1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3/Design Accelerator/Compress Spring11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3/Design Accelerator/Compress Spring11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3/Design Accelerator/OldVersions/Compress Spring11.0001.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3/Design Accelerator/OldVersions/Compress Spring11.0001.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3.idw |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3.idw |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3.ipn |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3.ipn |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_1.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_1.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_2.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_2.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_3.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_3.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_4.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Assembly_Rev_3_4.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Disassembly_Rev_3.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Extruder_Disassembly_Rev_3.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_19x4mm_0.8mm_40deg_CCW.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_19x4mm_0.8mm_40deg_CCW.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_19x4mm_0.8mm_40deg_CCW.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_19x4mm_0.8mm_40deg_CCW.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_9.4x6mm_0.8mm_40deg_CW_Motor.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0007.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0007.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0008.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0008.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0009.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear11.0009.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear21.0007.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear21.0007.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear21.0008.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear21.0008.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear21.0009.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gear21.0009.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0007.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0007.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0008.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0008.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0009.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/OldVersions/Spur Gears1.0009.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Assembly.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Hobbed_Gear.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Hobbed_Gear.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Nut_M3_1.6mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Nut_M3_1.6mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Nut_M3_2.35mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Nut_M3_2.35mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Screw_M3_16mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Screw_M3_16mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Screw_M3_20mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Screw_M3_20mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Screw_M3_25mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Screw_M3_25mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Stepper_Motor.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Stepper_Motor.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Top_Plate_Rev_3.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Top_Plate_Rev_3.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Top_Plate_Rev_3.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Top_Plate_Rev_3.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Washer_3mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Washer_3mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. C/Washer_5mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. C/Washer_5mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
