| /CAD Files/Belt_Extruder/Rev. D/Back_Panel.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Back_Panel.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bearing.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bearing.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_16mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_16mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_8mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_8mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_A_8mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_A_8mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_A_8mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_A_8mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_B_8mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_B_8mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_B_8mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bearing_Center_Part_B_8mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Belt_4in.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Belt_4in.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gear22.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gear22.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Belt_Gear_Assembly.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bottom_Plate_Rev_4.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bottom_Plate_Rev_4.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Bottom_Plate_Rev_4.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Bottom_Plate_Rev_4.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Arm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Arm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Arm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Arm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_1.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_1.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_2.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_2.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_3.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_3.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_4.png |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Extruder_Assembly_Rev_4_4.png |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_15x4mm_0.8mm_40deg_CW.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_15x4mm_0.8mm_40deg_CW.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_15x4mm_0.8mm_40deg_CW.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_15x4mm_0.8mm_40deg_CW.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_19x4mm_0.8mm_40deg_CCW.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_19x4mm_0.8mm_40deg_CCW.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_19x4mm_0.8mm_40deg_CCW.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_19x4mm_0.8mm_40deg_CCW.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_9.4x6mm_0.8mm_40deg_CCW_Motor.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_9.4x6mm_0.8mm_40deg_CCW_Motor.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_9.4x6mm_0.8mm_40deg_CCW_Motor.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_9.4x6mm_0.8mm_40deg_CCW_Motor.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly/Design Accelerator/Spur Gear11.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly/Design Accelerator/Spur Gear21.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly/Design Accelerator/Spur Gears1.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly.iam |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Assembly.iam |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CCW_14x6.5mm_0.58mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Helical_Gear_Belt_19x4mm_0.8mm_40deg_CW_14x6.5mm_0.58mm.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Hobbed_Gear.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Hobbed_Gear.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Nut_M3_1.6mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Nut_M3_1.6mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Nut_M3_2.35mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Nut_M3_2.35mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Screw_M3_16mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Screw_M3_16mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Screw_M3_20mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Screw_M3_20mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Screw_M3_25mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Screw_M3_25mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Spacer_6mm_3.4mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Spacer_6mm_3.4mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Stepper_Motor.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Stepper_Motor.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Top_Plate_Rev_4.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Top_Plate_Rev_4.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Top_Plate_Rev_4.stl |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Top_Plate_Rev_4.stl |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Washer_3mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Washer_3mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /CAD Files/Belt_Extruder/Rev. D/Washer_5mm.ipt |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /CAD Files/Belt_Extruder/Rev. D/Washer_5mm.ipt |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
