| 0,0 → 1,104 |
|---|
| #ifndef __maindefs_h |
| #define __maindefs_h |
| |
| #include <p18f27j13.h> |
| #include "uart.h" |
| |
| // Option to enable/disable internal oscillator |
| #define USE_EXT_OSC |
| |
| // |
| #define UART1_RX_TO_BUFFER |
| //#define UART1_RX_TO_XBEE |
| |
| // Option to disable SPI MISO |
| #define SPI2_WRITE_ONLY |
| |
| //#define _DEBUG |
| //#define _TEST_UART |
| //#define _TEST_I2C_MASTER |
| //#define _TEST_I2C_SLAVE |
| //#define _TEST_SPI |
| //#define _TEST_NFC |
| //#define _TEST_LED_BACKPACK |
| //#define _TEST_SSD1306_OLED |
| //#define _TEST_SSD1331_OLED |
| //#define _TEST_ADC |
| //#define _TEST_XBEE |
| //#define _TEST_NFC_TO_SSD1306_OLED |
| //#define _TEST_TIMER1_RTC |
| #define _TEST_LUX |
| |
| // Enable or disable debug prints depending on project preprocessor (_DEBUG) |
| #ifdef _DEBUG |
| #define DBG_PRINT_MAIN(x) UART1_WriteS(x) |
| #define DBG_PRINT_UART(x) UART1_WriteS(x) |
| #define DBG_PRINT_I2C(x) UART1_WriteS(x) |
| #define DBG_PRINT_SPI(x) UART1_WriteS(x) |
| #define DBG_PRINT_XBEE(x) UART1_WriteS(x) |
| #define DBG_PRINT_PORTB_INT(x) |
| #define DBG_PRINT_INT(x) |
| #define DBG_PRINT_BUFFER(x) |
| #else |
| #define DBG_PRINT_MAIN(x) |
| #define DBG_PRINT_UART(x) |
| #define DBG_PRINT_I2C(x) |
| #define DBG_PRINT_SPI(x) |
| #define DBG_PRINT_XBEE(x) |
| #define DBG_PRINT_PORTB_INT(x) |
| #define DBG_PRINT_INT(x) |
| #define DBG_PRINT_BUFFER(x) |
| #endif |
| |
| // Pin allocations |
| #define LED_BLUE_TRIS TRISCbits.TRISC5 |
| #define LED_BLUE_LAT LATCbits.LATC5 |
| #define LED_RED_TRIS TRISCbits.TRISC2 |
| #define LED_RED_LAT LATCbits.LATC2 |
| |
| #define ADC_AN0_TRIS TRISAbits.TRISA0 |
| #define ADC_AN1_TRIS TRISAbits.TRISA1 |
| #define ADC_AN2_TRIS TRISAbits.TRISA2 |
| |
| #define XBEE_CTS_TRIS TRISBbits.TRISB0 |
| #define XBEE_CTS_LAT LATBbits.LATB0 |
| #define XBEE_CTS_PORT PORTBbits.RB0 |
| #define XBEE_RTS_TRIS TRISBbits.TRISB1 |
| #define XBEE_RTS_LAT LATBbits.LATB1 |
| |
| #define SPI_MOSI_TRIS TRISBbits.TRISB0 |
| #ifndef SPI2_WRITE_ONLY |
| #define SPI_MISO_TRIS TRISBbits.TRISB0 |
| #endif |
| #define SPI_CLK_TRIS TRISAbits.TRISA0 |
| #define SPI_DC_SELECT_TRIS TRISAbits.TRISA1 |
| #define SPI_DC_SELECT_LAT LATAbits.LATA1 |
| #define SPI_RESET_TRIS TRISAbits.TRISA2 |
| #define SPI_RESET_LAT LATAbits.LATA2 |
| #define SPI_SLAVE_SELECT_TRIS TRISAbits.TRISA3 |
| #define SPI_SLAVE_SELECT_LAT LATAbits.LATA3 |
| |
| #define NFC_IRQ_TRIS TRISAbits.TRISA5 |
| #define NFC_IRQ_PORT PORTAbits.RA5 |
| //#define NFC_RESET_TRIS TRISCbits.TRISC2 |
| //#define NFC_RESET_LAT LATCbits.LATC2 |
| |
| #define I2C_CLK_TRIS TRISCbits.TRISC3 |
| #define I2C_DAT_TRIS TRISCbits.TRISC4 |
| |
| #define UART1_RX_TRIS TRISCbits.TRISC7 |
| #define UART1_TX_TRIS TRISCbits.TRISC6 |
| |
| // PPS bindings (RP Pins) |
| #define PPS_SPI2_CLK_IN 0 // A0 |
| #define PPS_SPI2_CLK_OUT RPOR0 // A0 |
| #define PPS_SPI2_MOSI RPOR3 // B0 |
| #ifndef SPI2_WRITE_ONLY |
| #define PPS_SPI2_MISO 3 // NA |
| #endif |
| |
| //#define PPS_UART2_RX 5 |
| //#define PPS_UART2_TX RPOR6 |
| |
| #endif |
| |