| 0,0 → 1,66 |
|---|
| #include "defines.h" |
| #include "INTERRUPTS.h" |
| #include "IOC.h" |
| |
| void Interrupt_Init() { |
| } |
| |
| void Interrupt_Enable() { |
| // Enable global and peripheral interrupts |
| INTCONbits.PEIE = 1; |
| INTCONbits.GIE = 1; |
| } |
| |
| void Interrupt_Disable() { |
| INTCONbits.PEIE = 0; |
| INTCONbits.GIE = 0; |
| } |
| |
| void interrupt InterruptHandler(void) { |
| // We need to check the interrupt flag of each enabled high-priority interrupt to |
| // see which device generated this interrupt. Then we can call the correct handler. |
| |
| if (INTCONbits.IOCIF) { |
| // Call the handler |
| IOC_Interrupt_Handler(); |
| |
| INTCONbits.IOCIF = 0; |
| |
| return; |
| } |
| |
| // // Check to see if we have an I2C interrupt |
| // if (PIR1bits.SSP1IF) { |
| // |
| // // Call the handler |
| // I2C1_Interrupt_Handler(); |
| // |
| // // Clear the interrupt flag |
| // PIR1bits.SSP1IF = 0; |
| // |
| // return; |
| // } |
| |
| // if (PIR1bits.RCIF) { |
| // |
| // // Call the handler |
| // UART_RX_Interrupt_Handler(); |
| // |
| // // Clear the interrupt flag |
| // PIR1bits.RCIF = 0; |
| // |
| // return; |
| // } |
| |
| // if (PIR1bits.TXIF) { |
| // |
| // // Call the handler |
| // UART_TX_Interrupt_Handler(); |
| // |
| // // Clear the interrupt flag |
| // PIR1bits.TXIF = 0; |
| // |
| // return; |
| // } |
| |
| } |