/PIC Stuff/PICX_12F1840/nbproject/Makefile-default.mk |
---|
0,0 → 1,188 |
# |
# Generated Makefile - do not edit! |
# |
# Edit the Makefile in the project folder instead (../Makefile). Each target |
# has a -pre and a -post target defined where you can add customized code. |
# |
# This makefile implements configuration specific macros and targets. |
# Include project Makefile |
ifeq "${IGNORE_LOCAL}" "TRUE" |
# do not include local makefile. User is passing all local related variables already |
else |
include Makefile |
# Include makefile containing local settings |
ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk" |
include nbproject/Makefile-local-default.mk |
endif |
endif |
# Environment |
MKDIR=gnumkdir -p |
RM=rm -f |
MV=mv |
CP=cp |
# Macros |
CND_CONF=default |
ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
IMAGE_TYPE=debug |
OUTPUT_SUFFIX=cof |
DEBUGGABLE_SUFFIX=cof |
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
else |
IMAGE_TYPE=production |
OUTPUT_SUFFIX=hex |
DEBUGGABLE_SUFFIX=cof |
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
endif |
# Object Directory |
OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE} |
# Distribution Directory |
DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE} |
# Object Files Quoted if spaced |
OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.p1 ${OBJECTDIR}/base_INTERRUPTS.p1 ${OBJECTDIR}/base_UART.p1 ${OBJECTDIR}/base_CPS.p1 ${OBJECTDIR}/base_PWM.p1 |
POSSIBLE_DEPFILES=${OBJECTDIR}/main.p1.d ${OBJECTDIR}/base_INTERRUPTS.p1.d ${OBJECTDIR}/base_UART.p1.d ${OBJECTDIR}/base_CPS.p1.d ${OBJECTDIR}/base_PWM.p1.d |
# Object Files |
OBJECTFILES=${OBJECTDIR}/main.p1 ${OBJECTDIR}/base_INTERRUPTS.p1 ${OBJECTDIR}/base_UART.p1 ${OBJECTDIR}/base_CPS.p1 ${OBJECTDIR}/base_PWM.p1 |
CFLAGS= |
ASFLAGS= |
LDLIBSOPTIONS= |
############# Tool locations ########################################## |
# If you copy a project from one host to another, the path where the # |
# compiler is installed may be different. # |
# If you open this project with MPLAB X in the new host, this # |
# makefile will be regenerated and the paths will be corrected. # |
####################################################################### |
# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build |
FIXDEPS=fixDeps |
.build-conf: ${BUILD_SUBPROJECTS} |
${MAKE} ${MAKE_OPTIONS} -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
MP_PROCESSOR_OPTION=12F1840 |
# ------------------------------------------------------------------------------------ |
# Rules for buildStep: compile |
ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
${OBJECTDIR}/main.p1: main.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/main.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/main.p1 main.c |
@-${MV} ${OBJECTDIR}/main.d ${OBJECTDIR}/main.p1.d |
@${FIXDEPS} ${OBJECTDIR}/main.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_INTERRUPTS.p1: base_INTERRUPTS.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_INTERRUPTS.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_INTERRUPTS.p1 base_INTERRUPTS.c |
@-${MV} ${OBJECTDIR}/base_INTERRUPTS.d ${OBJECTDIR}/base_INTERRUPTS.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_INTERRUPTS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_UART.p1: base_UART.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_UART.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_UART.p1 base_UART.c |
@-${MV} ${OBJECTDIR}/base_UART.d ${OBJECTDIR}/base_UART.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_UART.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_CPS.p1: base_CPS.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_CPS.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_CPS.p1 base_CPS.c |
@-${MV} ${OBJECTDIR}/base_CPS.d ${OBJECTDIR}/base_CPS.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_CPS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_PWM.p1: base_PWM.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_PWM.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_PWM.p1 base_PWM.c |
@-${MV} ${OBJECTDIR}/base_PWM.d ${OBJECTDIR}/base_PWM.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_PWM.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
else |
${OBJECTDIR}/main.p1: main.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/main.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/main.p1 main.c |
@-${MV} ${OBJECTDIR}/main.d ${OBJECTDIR}/main.p1.d |
@${FIXDEPS} ${OBJECTDIR}/main.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_INTERRUPTS.p1: base_INTERRUPTS.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_INTERRUPTS.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_INTERRUPTS.p1 base_INTERRUPTS.c |
@-${MV} ${OBJECTDIR}/base_INTERRUPTS.d ${OBJECTDIR}/base_INTERRUPTS.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_INTERRUPTS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_UART.p1: base_UART.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_UART.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_UART.p1 base_UART.c |
@-${MV} ${OBJECTDIR}/base_UART.d ${OBJECTDIR}/base_UART.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_UART.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_CPS.p1: base_CPS.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_CPS.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_CPS.p1 base_CPS.c |
@-${MV} ${OBJECTDIR}/base_CPS.d ${OBJECTDIR}/base_CPS.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_CPS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
${OBJECTDIR}/base_PWM.p1: base_PWM.c nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} ${OBJECTDIR} |
@${RM} ${OBJECTDIR}/base_PWM.p1.d |
${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_PWM.p1 base_PWM.c |
@-${MV} ${OBJECTDIR}/base_PWM.d ${OBJECTDIR}/base_PWM.p1.d |
@${FIXDEPS} ${OBJECTDIR}/base_PWM.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
endif |
# ------------------------------------------------------------------------------------ |
# Rules for buildStep: assemble |
ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
else |
endif |
# ------------------------------------------------------------------------------------ |
# Rules for buildStep: link |
ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} |
${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G --asmlist -mdist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.map -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -odist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} |
@${RM} dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.hex |
else |
dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk |
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} |
${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G --asmlist -mdist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.map --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -odist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} |
endif |
# Subprojects |
.build-subprojects: |
# Subprojects |
.clean-subprojects: |
# Clean Targets |
.clean-conf: ${CLEAN_SUBPROJECTS} |
${RM} -r build/default |
${RM} -r dist/default |
# Enable dependency checking |
.dep.inc: .depcheck-impl |
DEPFILES=$(shell mplabwildcard ${POSSIBLE_DEPFILES}) |
ifneq (${DEPFILES},) |
include ${DEPFILES} |
endif |
/PIC Stuff/PICX_12F1840/nbproject/Makefile-genesis.properties |
---|
0,0 → 1,8 |
# |
#Mon Jan 21 02:12:53 EST 2013 |
default.languagetoolchain.dir=C\:\\Program Files (x86)\\Microchip\\xc8\\v1.12\\bin |
com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=d94e033fce233e60ccb9abf3a212a9b7 |
default.languagetoolchain.version=1.12 |
host.platform=windows |
conf.ids=default |
default.com-microchip-mplab-nbide-toolchainXC8-XC8LanguageToolchain.md5=8fc157cf2b8157578b9f80e4bbee68f8 |
/PIC Stuff/PICX_12F1840/nbproject/Makefile-impl.mk |
---|
0,0 → 1,69 |
# |
# Generated Makefile - do not edit! |
# |
# Edit the Makefile in the project folder instead (../Makefile). Each target |
# has a pre- and a post- target defined where you can add customization code. |
# |
# This makefile implements macros and targets common to all configurations. |
# |
# NOCDDL |
# Building and Cleaning subprojects are done by default, but can be controlled with the SUB |
# macro. If SUB=no, subprojects will not be built or cleaned. The following macro |
# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf |
# and .clean-reqprojects-conf unless SUB has the value 'no' |
SUB_no=NO |
SUBPROJECTS=${SUB_${SUB}} |
BUILD_SUBPROJECTS_=.build-subprojects |
BUILD_SUBPROJECTS_NO= |
BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}} |
CLEAN_SUBPROJECTS_=.clean-subprojects |
CLEAN_SUBPROJECTS_NO= |
CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}} |
# Project Name |
PROJECTNAME=PICX_12F1840 |
# Active Configuration |
DEFAULTCONF=default |
CONF=${DEFAULTCONF} |
# All Configurations |
ALLCONFS=default |
# build |
.build-impl: .build-pre |
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf |
# clean |
.clean-impl: .clean-pre |
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf |
# clobber |
.clobber-impl: .clobber-pre .depcheck-impl |
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean |
# all |
.all-impl: .all-pre .depcheck-impl |
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build |
# dependency checking support |
.depcheck-impl: |
# @echo "# This code depends on make tool being used" >.dep.inc |
# @if [ -n "${MAKE_VERSION}" ]; then \ |
# echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \ |
# echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \ |
# echo "include \$${DEPFILES}" >>.dep.inc; \ |
# echo "endif" >>.dep.inc; \ |
# else \ |
# echo ".KEEP_STATE:" >>.dep.inc; \ |
# echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \ |
# fi |
/PIC Stuff/PICX_12F1840/nbproject/Makefile-local-default.mk |
---|
0,0 → 1,37 |
# |
# Generated Makefile - do not edit! |
# |
# |
# This file contains information about the location of compilers and other tools. |
# If you commmit this file into your revision control server, you will be able to |
# to checkout the project and build it from the command line with make. However, |
# if more than one person works on the same project, then this file might show |
# conflicts since different users are bound to have compilers in different places. |
# In that case you might choose to not commit this file and let MPLAB X recreate this file |
# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at |
# least once so the file gets created and the project can be built. Finally, you can also |
# avoid using this file at all if you are only building from the command line with make. |
# You can invoke make with the values of the macros: |
# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ... |
# |
SHELL=cmd.exe |
PATH_TO_IDE_BIN=C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/ |
# Adding MPLAB X bin directory to path. |
PATH:=C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/:$(PATH) |
# Path to java used to run MPLAB X when this makefile was created |
MP_JAVA_PATH="C:\Program Files (x86)\Microchip\MPLABX\sys\java\jre1.6.0_32-windows-x64\java-windows/bin/" |
OS_CURRENT="$(shell uname -s)" |
MP_CC="C:\Program Files (x86)\Microchip\xc8\v1.12\bin\xc8.exe" |
# MP_CPPC is not defined |
# MP_BC is not defined |
# MP_AS is not defined |
# MP_LD is not defined |
# MP_AR is not defined |
DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/extractobjectdependencies.jar" |
MP_CC_DIR="C:\Program Files (x86)\Microchip\xc8\v1.12\bin" |
# MP_CPPC_DIR is not defined |
# MP_BC_DIR is not defined |
# MP_AS_DIR is not defined |
# MP_LD_DIR is not defined |
# MP_AR_DIR is not defined |
# MP_BC_DIR is not defined |
/PIC Stuff/PICX_12F1840/nbproject/Makefile-variables.mk |
---|
0,0 → 1,13 |
# |
# Generated - do not edit! |
# |
# NOCDDL |
# |
CND_BASEDIR=`pwd` |
# default configuration |
CND_ARTIFACT_DIR_default=dist/default/production |
CND_ARTIFACT_NAME_default=PICX_12F1840.production.hex |
CND_ARTIFACT_PATH_default=dist/default/production/PICX_12F1840.production.hex |
CND_PACKAGE_DIR_default=${CND_DISTDIR}/default/package |
CND_PACKAGE_NAME_default=picx12f1840.tar |
CND_PACKAGE_PATH_default=${CND_DISTDIR}/default/package/picx12f1840.tar |
/PIC Stuff/PICX_12F1840/nbproject/Package-default.bash |
---|
0,0 → 1,73 |
#!/bin/bash -x |
# |
# Generated - do not edit! |
# |
# Macros |
TOP=`pwd` |
CND_CONF=default |
CND_DISTDIR=dist |
TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging |
TMPDIRNAME=tmp-packaging |
OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
OUTPUT_BASENAME=PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
PACKAGE_TOP_DIR=picx12f1840/ |
# Functions |
function checkReturnCode |
{ |
rc=$? |
if [ $rc != 0 ] |
then |
exit $rc |
fi |
} |
function makeDirectory |
# $1 directory path |
# $2 permission (optional) |
{ |
mkdir -p "$1" |
checkReturnCode |
if [ "$2" != "" ] |
then |
chmod $2 "$1" |
checkReturnCode |
fi |
} |
function copyFileToTmpDir |
# $1 from-file path |
# $2 to-file path |
# $3 permission |
{ |
cp "$1" "$2" |
checkReturnCode |
if [ "$3" != "" ] |
then |
chmod $3 "$2" |
checkReturnCode |
fi |
} |
# Setup |
cd "${TOP}" |
mkdir -p ${CND_DISTDIR}/${CND_CONF}/package |
rm -rf ${TMPDIR} |
mkdir -p ${TMPDIR} |
# Copy files and create directories and links |
cd "${TOP}" |
makeDirectory ${TMPDIR}/picx12f1840/bin |
copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755 |
# Generate tar file |
cd "${TOP}" |
rm -f ${CND_DISTDIR}/${CND_CONF}/package/picx12f1840.tar |
cd ${TMPDIR} |
tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/picx12f1840.tar * |
checkReturnCode |
# Cleanup |
cd "${TOP}" |
rm -rf ${TMPDIR} |
/PIC Stuff/PICX_12F1840/nbproject/configurations.xml |
---|
0,0 → 1,102 |
<?xml version="1.0" encoding="UTF-8"?> |
<configurationDescriptor version="62"> |
<logicalFolder name="root" displayName="root" projectFiles="true"> |
<logicalFolder name="HeaderFiles" |
displayName="Header Files" |
projectFiles="true"> |
<itemPath>base_INTERRUPTS.h</itemPath> |
<itemPath>base_UART.h</itemPath> |
<itemPath>defines.h</itemPath> |
<itemPath>base_CPS.h</itemPath> |
<itemPath>base_PWM.h</itemPath> |
</logicalFolder> |
<logicalFolder name="LinkerScript" |
displayName="Linker Files" |
projectFiles="true"> |
</logicalFolder> |
<logicalFolder name="SourceFiles" |
displayName="Source Files" |
projectFiles="true"> |
<itemPath>main.c</itemPath> |
<itemPath>base_INTERRUPTS.c</itemPath> |
<itemPath>base_UART.c</itemPath> |
<itemPath>base_CPS.c</itemPath> |
<itemPath>base_PWM.c</itemPath> |
</logicalFolder> |
<logicalFolder name="ExternalFiles" |
displayName="Important Files" |
projectFiles="false"> |
<itemPath>Makefile</itemPath> |
</logicalFolder> |
</logicalFolder> |
<projectmakefile>Makefile</projectmakefile> |
<confs> |
<conf name="default" type="2"> |
<toolsSet> |
<developmentServer>localhost</developmentServer> |
<targetDevice>PIC12F1840</targetDevice> |
<targetHeader></targetHeader> |
<targetPluginBoard></targetPluginBoard> |
<platformTool>PICkit3PlatformTool</platformTool> |
<languageToolchain>XC8</languageToolchain> |
<languageToolchainVersion>1.12</languageToolchainVersion> |
<platform>3</platform> |
</toolsSet> |
<compileType> |
<linkerTool> |
<linkerLibItems> |
</linkerLibItems> |
</linkerTool> |
<loading> |
<useAlternateLoadableFile>false</useAlternateLoadableFile> |
<alternateLoadableFile></alternateLoadableFile> |
</loading> |
</compileType> |
<makeCustomizationType> |
<makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled> |
<makeCustomizationPreStep></makeCustomizationPreStep> |
<makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled> |
<makeCustomizationPostStep></makeCustomizationPostStep> |
<makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID> |
<makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines> |
<makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile> |
</makeCustomizationType> |
<HI-TECH-COMP> |
</HI-TECH-COMP> |
<HI-TECH-LINK> |
</HI-TECH-LINK> |
<PICkit3PlatformTool> |
<property key="AutoSelectMemRanges" value="auto"/> |
<property key="Freeze Peripherals" value="true"/> |
<property key="SecureSegment.SegmentProgramming" value="FullChipProgramming"/> |
<property key="ToolFirmwareFilePath" |
value="Press to browse for a specific firmware version"/> |
<property key="ToolFirmwareOption.UseLatestFirmware" value="true"/> |
<property key="hwtoolclock.frcindebug" value="false"/> |
<property key="memories.aux" value="false"/> |
<property key="memories.bootflash" value="false"/> |
<property key="memories.configurationmemory" value="false"/> |
<property key="memories.eeprom" value="false"/> |
<property key="memories.flashdata" value="true"/> |
<property key="memories.id" value="false"/> |
<property key="memories.programmemory" value="true"/> |
<property key="memories.programmemory.end" value="0xfff"/> |
<property key="memories.programmemory.start" value="0x0"/> |
<property key="poweroptions.powerenable" value="false"/> |
<property key="programmertogo.imagename" value=""/> |
<property key="programoptions.eraseb4program" value="true"/> |
<property key="programoptions.pgmspeed" value="2"/> |
<property key="programoptions.preserveeeprom" value="false"/> |
<property key="programoptions.preserveprogramrange" value="false"/> |
<property key="programoptions.preserveprogramrange.end" value="0xfff"/> |
<property key="programoptions.preserveprogramrange.start" value="0x0"/> |
<property key="programoptions.preserveuserid" value="false"/> |
<property key="programoptions.usehighvoltageonmclr" value="false"/> |
<property key="programoptions.uselvpprogramming" value="false"/> |
<property key="voltagevalue" value="5.0"/> |
</PICkit3PlatformTool> |
<XC8-config-global> |
</XC8-config-global> |
</conf> |
</confs> |
</configurationDescriptor> |
/PIC Stuff/PICX_12F1840/nbproject/private/SuppressibleMessageMemo.properties |
---|
0,0 → 1,3 |
# |
#Thu Jan 17 20:22:21 EST 2013 |
pk3/CHECK_4_HIGH_VOLTAGE_VPP=true |
/PIC Stuff/PICX_12F1840/nbproject/private/configurations.xml |
---|
0,0 → 1,25 |
<?xml version="1.0" encoding="UTF-8"?> |
<configurationDescriptor version="62"> |
<projectmakefile>Makefile</projectmakefile> |
<defaultConf>0</defaultConf> |
<confs> |
<conf name="default" type="2"> |
<platformToolSN>:=MPLABCommUSB:=04D8:=900A:=0002:=Microchip Technology Inc.:=PICkit 3:=BUR114189291:=x:=en</platformToolSN> |
<languageToolchainDir>C:\Program Files (x86)\Microchip\xc8\v1.12\bin</languageToolchainDir> |
<mdbdebugger version="1"> |
<placeholder1>place holder 1</placeholder1> |
<placeholder2>place holder 2</placeholder2> |
</mdbdebugger> |
<runprofile version="6"> |
<args></args> |
<rundir></rundir> |
<buildfirst>true</buildfirst> |
<console-type>0</console-type> |
<terminal-type>0</terminal-type> |
<remove-instrumentation>0</remove-instrumentation> |
<environment> |
</environment> |
</runprofile> |
</conf> |
</confs> |
</configurationDescriptor> |
/PIC Stuff/PICX_12F1840/nbproject/private/private.properties |
---|
--- private/private.xml (nonexistent) |
+++ private/private.xml (revision 163) |
@@ -0,0 +1,11 @@ |
+<?xml version="1.0" encoding="UTF-8"?> |
+<project-private xmlns="http://www.netbeans.org/ns/project-private/1"> |
+ <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/1"/> |
+ <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/1"> |
+ <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/defines.h</file> |
+ <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/base_CPS.h</file> |
+ <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/main.c</file> |
+ <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/base_UART.c</file> |
+ <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/base_CPS.c</file> |
+ </open-files> |
+</project-private> |
/PIC Stuff/PICX_12F1840/nbproject/project.properties |
---|
--- project.xml (nonexistent) |
+++ project.xml (revision 163) |
@@ -0,0 +1,16 @@ |
+<?xml version="1.0" encoding="UTF-8"?> |
+<project xmlns="http://www.netbeans.org/ns/project/1"> |
+ <type>com.microchip.mplab.nbide.embedded.makeproject</type> |
+ <configuration> |
+ <data xmlns="http://www.netbeans.org/ns/make-project/1"> |
+ <name>PICX_12F1840</name> |
+ <creation-uuid>7fe93e92-3ae3-42d5-9338-2afa3dbfcf6b</creation-uuid> |
+ <make-project-type>0</make-project-type> |
+ <c-extensions>c</c-extensions> |
+ <cpp-extensions/> |
+ <header-extensions>h</header-extensions> |
+ <sourceEncoding>ISO-8859-1</sourceEncoding> |
+ <make-dep-projects/> |
+ </data> |
+ </configuration> |
+</project> |