| /PIC Stuff/PICX_12F1840/Makefile |
|---|
| 0,0 → 1,108 |
| # |
| # There exist several targets which are by default empty and which can be |
| # used for execution of your targets. These targets are usually executed |
| # before and after some main targets. They are: |
| # |
| # .build-pre: called before 'build' target |
| # .build-post: called after 'build' target |
| # .clean-pre: called before 'clean' target |
| # .clean-post: called after 'clean' target |
| # .clobber-pre: called before 'clobber' target |
| # .clobber-post: called after 'clobber' target |
| # .all-pre: called before 'all' target |
| # .all-post: called after 'all' target |
| # .help-pre: called before 'help' target |
| # .help-post: called after 'help' target |
| # |
| # Targets beginning with '.' are not intended to be called on their own. |
| # |
| # Main targets can be executed directly, and they are: |
| # |
| # build build a specific configuration |
| # clean remove built files from a configuration |
| # clobber remove all built files |
| # all build all configurations |
| # help print help mesage |
| # |
| # Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and |
| # .help-impl are implemented in nbproject/makefile-impl.mk. |
| # |
| # Available make variables: |
| # |
| # CND_BASEDIR base directory for relative paths |
| # CND_DISTDIR default top distribution directory (build artifacts) |
| # CND_BUILDDIR default top build directory (object files, ...) |
| # CONF name of current configuration |
| # CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration) |
| # CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration) |
| # CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration) |
| # CND_PACKAGE_DIR_${CONF} directory of package (current configuration) |
| # CND_PACKAGE_NAME_${CONF} name of package (current configuration) |
| # CND_PACKAGE_PATH_${CONF} path to package (current configuration) |
| # |
| # NOCDDL |
| # Environment |
| MKDIR=mkdir |
| CP=cp |
| CCADMIN=CCadmin |
| RANLIB=ranlib |
| # build |
| build: .build-post |
| .build-pre: |
| # Add your pre 'build' code here... |
| .build-post: .build-impl |
| # Add your post 'build' code here... |
| # clean |
| clean: .clean-post |
| .clean-pre: |
| # Add your pre 'clean' code here... |
| .clean-post: .clean-impl |
| # Add your post 'clean' code here... |
| # clobber |
| clobber: .clobber-post |
| .clobber-pre: |
| # Add your pre 'clobber' code here... |
| .clobber-post: .clobber-impl |
| # Add your post 'clobber' code here... |
| # all |
| all: .all-post |
| .all-pre: |
| # Add your pre 'all' code here... |
| .all-post: .all-impl |
| # Add your post 'all' code here... |
| # help |
| help: .help-post |
| .help-pre: |
| # Add your pre 'help' code here... |
| .help-post: .help-impl |
| # Add your post 'help' code here... |
| # include project implementation makefile |
| include nbproject/Makefile-impl.mk |
| # include project make variables |
| include nbproject/Makefile-variables.mk |
| /PIC Stuff/PICX_12F1840/base_CPS.c |
|---|
| 0,0 → 1,118 |
| #include <xc.h> |
| #include "defines.h" |
| #include "base_CPS.h" |
| static CPS_DATA *cps_data_p; |
| void CPS_Init(CPS_DATA* data) { |
| cps_data_p = data; |
| for (char i = 0; i < 4; i++) { |
| cps_data_p->btn_pressed[i] = 0; |
| cps_data_p->btn_last_value[i] = 0; |
| cps_data_p->btn_avg_value[i] = 0; |
| cps_data_p->btn_pct_value[i] = 0; |
| } |
| /* Initialize port direction */ |
| CPS_0_TRIS = 1; |
| CPS_1_TRIS = 1; |
| /* Initialize FVR for the upper threshold (Ref+) */ |
| FVRCONbits.CDAFVR = 0b01; // Gain of 1x (1.024V) |
| FVRCONbits.FVREN = 1; // Enable FVR module |
| /* Initialize DAC for the lower threshold (Ref-) */ |
| DACCON0bits.DACEN = 0; // Disable DAC |
| DACCON0bits.DACLPS = 0; // Negative reference source selected |
| DACCON0bits.DACOE = 0; // Output not routed to DACOUT pin |
| DACCON0bits.DACPSS = 0b00; // Vdd used as positive source |
| // DACCON0bits.DACNSS = 0; // Vss used as negative source |
| DACCON1bits.DACR = 0b00000; // Voltage output set to 0 |
| /* Initialize Timer 0 */ |
| OPTION_REGbits.TMR0CS = 0; // Clock source is FOSC/4 |
| OPTION_REGbits.PSA = 0; // Prescaler enabled |
| OPTION_REGbits.PS = 0b111; // Prescaler of 1:256 |
| /* Initialize Timer 1 */ |
| T1CONbits.TMR1CS = 0b11; // Clock source is Capacitive Sensing Oscillator |
| T1CONbits.T1CKPS = 0b00; // 1:1 Prescale value |
| T1GCONbits.TMR1GE = 1; // Counting is controlled by the gate function |
| T1GCONbits.T1GPOL = 1; // Gate is active high |
| T1GCONbits.T1GTM = 1; // Gate toggle mode is enabled |
| T1GCONbits.T1GSPM = 0; // Gate single-pulse mode is disabled |
| T1GCONbits.T1GSS = 0b01; // Gate source is Timer 0 overflow |
| T1CONbits.TMR1ON = 1; // Enables timer 1 |
| /* Initialize CPS Module */ |
| CPSCON0bits.CPSRM = 1; // DAC and FVR used for Vref- and Vref+ |
| CPSCON0bits.CPSRNG = 0b11; // Osc in high range (100uA) |
| CPSCON0bits.T0XCS = 0; // Timer 0 clock runs at FOSC/4 |
| CPSCON1bits.CPSCH = 0b00; // Channel 0 (CPS0) |
| cps_data_p->channel = 0; |
| CPSCON0bits.CPSON = 1; // CPS module is enabled |
| /* Initialize timer interrupts and clear timers */ |
| INTCONbits.TMR0IE = 1; // Timer 0 interrupt enabled |
| PIE1bits.TMR1IE = 0; // Timer 1 interrupt disabled |
| CPS_Reset(); |
| } |
| void CPS_Timer_0_Interrupt_Handler() { |
| unsigned int value = TMR1; |
| long percent; |
| if (value < 10) { |
| return; |
| } |
| // Calculate percentage change |
| percent = (long)cps_data_p->btn_avg_value[cps_data_p->channel]-(long)value; |
| if (percent < 0) |
| percent = 0; |
| else { |
| percent *= 100; |
| percent /= cps_data_p->btn_avg_value[cps_data_p->channel]; |
| } |
| cps_data_p->btn_last_value[cps_data_p->channel] = value; |
| cps_data_p->btn_pct_value[cps_data_p->channel] = percent; |
| if (percent < CPS_PCT_OFF) { |
| // Calculate average |
| cps_data_p->btn_avg_value[cps_data_p->channel] = |
| cps_data_p->btn_avg_value[cps_data_p->channel] + |
| ((long)value - (long)cps_data_p->btn_avg_value[cps_data_p->channel]) |
| /CPS_AVG_COUNT; |
| // Set flag to indicate that button is not pressed |
| cps_data_p->btn_pressed[cps_data_p->channel] = 0; |
| } else if (percent > CPS_PCT_ON) |
| // Set flag to indicate that button was pressed |
| cps_data_p->btn_pressed[cps_data_p->channel] = 1; |
| cps_data_p->channel = cps_data_p->channel + 1; |
| if (cps_data_p->channel == CPS_NUM_CHANNELS) |
| cps_data_p->channel = 0; |
| CPSCON1bits.CPSCH = cps_data_p->channel; |
| CPS_Reset(); |
| } |
| void CPS_Reset() { |
| TMR1 = 0; |
| TMR0 = 0; |
| } |
| void CPS_Enable() { |
| INTCONbits.TMR0IE = 1; // Timer 0 interrupt enabled |
| T1CONbits.TMR1ON = 1; |
| CPSCON0bits.CPSON = 1; |
| CPS_Reset(); |
| } |
| void CPS_Disable() { |
| INTCONbits.TMR0IE = 0; |
| CPSCON0bits.CPSON = 0; |
| T1CONbits.TMR1ON = 0; |
| } |
| /PIC Stuff/PICX_12F1840/base_CPS.h |
|---|
| 0,0 → 1,24 |
| #ifndef CPS_H |
| #define CPS_H |
| #define CPS_AVG_COUNT 16 |
| #define CPS_PCT_ON 10 |
| #define CPS_PCT_OFF 8 |
| #define CPS_NUM_CHANNELS 2 |
| typedef struct { |
| char channel; |
| char btn_pressed[4]; |
| unsigned int btn_last_value[4]; |
| unsigned int btn_avg_value[4]; |
| char btn_pct_value[4]; |
| } CPS_DATA; |
| void CPS_Init(CPS_DATA *data); |
| void CPS_Timer_0_Interrupt_Handler(void); |
| void CPS_Reset(void); |
| void CPS_Enable(void); |
| void CPS_Disable(void); |
| #endif |
| /PIC Stuff/PICX_12F1840/base_INTERRUPTS.c |
|---|
| 0,0 → 1,55 |
| #include <xc.h> |
| #include "defines.h" |
| #include "base_INTERRUPTS.h" |
| #include "base_UART.h" |
| #include "base_CPS.h" |
| void Interrupt_Enable() { |
| INTCONbits.GIE = 1; |
| INTCONbits.PEIE = 1; |
| } |
| void Interrupt_Disable() { |
| INTCONbits.GIE = 0; |
| INTCONbits.PEIE = 0; |
| } |
| void interrupt InterruptHandler(void) { |
| char tmr0_rollover = 0; |
| // Check to see if we have an interrupt on Timer 0 (CPS) |
| if (INTCONbits.TMR0IF) { |
| CPS_Timer_0_Interrupt_Handler(); |
| INTCONbits.TMR0IF = 0; |
| } |
| // // Check to see if we have an I2C interrupt |
| // if (PIR1bits.SSPIF) { |
| // I2C_Interrupt_Handler(); |
| // PIR1bits.SSPIF = 0; |
| // } |
| #ifndef UART_TX_ONLY |
| // Check to see if we have an interrupt on USART1 RX |
| if (PIR1bits.RCIF) { |
| UART_Recv_Interrupt_Handler(); |
| PIR1bits.RCIF = 0; |
| if (INTCONbits.TMR0IF) |
| tmr0_rollover = 1; |
| } |
| #endif |
| // Check to see if we have an interrupt on USART1 TX |
| if (PIR1bits.TXIF) { |
| UART_Send_Interrupt_Handler(); |
| // PIR1bits.TXIF = 0; |
| if (INTCONbits.TMR0IF) |
| tmr0_rollover = 1; |
| } |
| // If Timer 0 rolls over while servicing another interrupt handler, |
| // reset the timers as the sample will be inaccurate. |
| if (tmr0_rollover) { |
| CPS_Reset(); |
| } |
| } |
| /PIC Stuff/PICX_12F1840/base_INTERRUPTS.h |
|---|
| 0,0 → 1,12 |
| #ifndef INTERRUPTS_H |
| #define INTERRUPTS_H |
| // Enable all interrupts (high and low priority) |
| void Interrupt_Enable(void); |
| // Disable all interrupts (high and low priority) |
| void Interrupt_Disable(void); |
| void interrupt InterruptHandlerHigh(void); |
| #endif |
| /PIC Stuff/PICX_12F1840/base_PWM.c |
|---|
| 0,0 → 1,33 |
| #include <xc.h> |
| #include "defines.h" |
| #include "base_PWM.h" |
| void PWM_Init() { |
| // Output pin initially blocked |
| PWM_TRIS = 1; |
| /* Initialize PWM module */ |
| PR2 = 0xF9; // 4ms @ 16MHz |
| CCP1CONbits.P1M = 0b00; // Single output, P1A modulated only |
| CCP1CONbits.CCP1M = 0b1100; // PWM mode, P1A active-high, P1B active-high |
| // Idle the output till width is specified |
| CCPR1L = 0x00; |
| CCP1CONbits.DC1B = 0b00; |
| /* Initialize Timer 2 */ |
| PIR1bits.TMR2IF = 0; // Clear the interrupt flag for Timer 2 |
| T2CONbits.T2CKPS = 0b11; // Set a prescaler of 64 |
| T2CONbits.TMR2ON = 1; // Enable the timer |
| // Wait for the timer to overflow before enabling output |
| while (!PIR1bits.TMR2IF); |
| PWM_TRIS = 0; |
| } |
| void PWM_Set_Width(int width_us) { |
| // Set the pulse duration to the requested width |
| int value = width_us / 4; |
| CCPR1L = value >> 2; |
| CCP1CONbits.DC1B = value; |
| } |
| /PIC Stuff/PICX_12F1840/base_PWM.h |
|---|
| 0,0 → 1,12 |
| #ifndef PWM_H |
| #define PWM_H |
| #define PWM_Width_Min 510 |
| #define PWM_Width_Max 2300 |
| #define PWM_Width_Mid 1350 |
| void PWM_Init(void); |
| void PWM_Set_Width(int width_us); |
| #endif |
| /PIC Stuff/PICX_12F1840/base_UART.c |
|---|
| 0,0 → 1,137 |
| #include <xc.h> |
| #include "defines.h" |
| #include "base_UART.h" |
| static UART_DATA *uart_data_p; |
| void UART_Init(UART_DATA *data) { |
| uart_data_p = data; |
| UART_TX_TRIS = 0; // Tx pin set to output |
| #ifndef UART_TX_ONLY |
| UART_RX_TRIS = 1; // Rx pin set to input |
| #endif |
| LATAbits.LATA0 = 1; // Keep the line high at start |
| BAUDCONbits.BRG16 = 0; // 8-bit baud rate generator |
| SPBRGL = 25; // Set UART speed to 38400 baud |
| TXSTAbits.BRGH = 1; // High speed mode |
| TXSTAbits.SYNC = 0; // Async mode |
| RCSTAbits.SPEN = 1; // Serial port enable |
| TXSTAbits.TX9 = 0; // 8 bit transmission |
| TXSTAbits.TXEN = 1; // Transmission enabled |
| PIE1bits.TXIE = 0; // Disable TX interrupt |
| #ifndef UART_TX_ONLY |
| RCSTAbits.RX9 = 0; // 8 bit reception |
| RCSTAbits.CREN = 1; // Enables receiver |
| PIE1bits.RCIE = 1; // Enable RX interrupt |
| // Initialize the buffer that holds UART messages |
| uart_data_p->buffer_in_read_ind = 0; |
| uart_data_p->buffer_in_write_ind = 0; |
| uart_data_p->buffer_in_len = 0; |
| uart_data_p->buffer_in_len_tmp = 0; |
| #else |
| RCSTAbits.CREN = 0; |
| #endif |
| uart_data_p->buffer_out_ind = 0; |
| uart_data_p->buffer_out_len = 0; |
| } |
| void UART_Send_Interrupt_Handler() { |
| // Put remaining data in TSR for transmit |
| if (uart_data_p->buffer_out_ind != uart_data_p->buffer_out_len) { |
| TXREG = uart_data_p->buffer_out[uart_data_p->buffer_out_ind]; |
| uart_data_p->buffer_out_ind++; |
| } else { |
| while (!TXSTAbits.TRMT); // Wait for last byte to finish sending |
| PIE1bits.TXIE = 0; |
| uart_data_p->buffer_out_ind = 0; |
| uart_data_p->buffer_out_len = 0; |
| } |
| } |
| void UART_Write(const char *string, char length) { |
| while (PIE1bits.TXIE); // Wait for previous message to finish sending |
| uart_data_p->buffer_out_len = length; |
| uart_data_p->buffer_out_ind = 1; |
| for (char i = 0; i < length; i++) { |
| uart_data_p->buffer_out[i] = string[i]; |
| } |
| TXREG = uart_data_p->buffer_out[0]; // Put first byte in TSR |
| PIE1bits.TXIE = 1; |
| } |
| void UART_WriteD(const char* string, char length) { |
| PIE1bits.TXIE = 1; |
| for (char i = 0; i < length; i++) { |
| TXREG = string[i]; |
| NOP(); |
| while (!PIR1bits.TXIF); |
| } |
| PIE1bits.TXIE = 0; |
| } |
| #ifndef UART_TX_ONLY |
| void UART_Recv_Interrupt_Handler() { |
| if (PIR1bits.RCIF) { // Check if data receive flag is set |
| char c = RCREG; |
| // Save received data into buffer |
| uart_data_p->buffer_in[uart_data_p->buffer_in_write_ind] = c; |
| if (uart_data_p->buffer_in_write_ind == MAXUARTBUF - 1) { |
| uart_data_p->buffer_in_write_ind = 0; |
| } else { |
| uart_data_p->buffer_in_write_ind++; |
| } |
| // Store the last MAXUARTBUF values entered |
| if (uart_data_p->buffer_in_len_tmp < MAXUARTBUF) { |
| uart_data_p->buffer_in_len_tmp++; |
| } else { |
| if (uart_data_p->buffer_in_read_ind == MAXUARTBUF - 1) { |
| uart_data_p->buffer_in_read_ind = 0; |
| } else { |
| uart_data_p->buffer_in_read_ind++; |
| } |
| } |
| // Update buffer size upon receiving newline (0x0D) |
| if (c == UART_BREAK_CHAR) { |
| uart_data_p->buffer_in_len = uart_data_p->buffer_in_len_tmp; |
| uart_data_p->buffer_in_len_tmp = 0; |
| } |
| } |
| if (RCSTAbits.OERR == 1) { |
| // We've overrun the USART and must reset |
| TXSTAbits.TXEN = 0; // Kill anything currently sending |
| RCSTAbits.CREN = 0; // Reset UART1 |
| RCSTAbits.CREN = 1; |
| } |
| } |
| char UART_Buffer_Len() { |
| return uart_data_p->buffer_in_len; |
| } |
| /* Reader interface to the UART buffer, returns the number of bytes read */ |
| char UART_Read_Buffer(char *buffer) { |
| char i = 0; |
| while (uart_data_p->buffer_in_len != 0) { |
| buffer[i] = uart_data_p->buffer_in[uart_data_p->buffer_in_read_ind]; |
| i++; |
| if (uart_data_p->buffer_in_read_ind == MAXUARTBUF - 1) { |
| uart_data_p->buffer_in_read_ind = 0; |
| } else { |
| uart_data_p->buffer_in_read_ind++; |
| } |
| uart_data_p->buffer_in_len--; |
| } |
| return i; |
| } |
| #endif |
| /PIC Stuff/PICX_12F1840/base_UART.h |
|---|
| 0,0 → 1,33 |
| #ifndef UART_H |
| #define UART_H |
| #define UART_TX_ONLY |
| #define UART_BUFFER_SIZE 32 |
| #define UART_BREAK_CHAR 0x0D |
| typedef struct { |
| #ifndef UART_TX_ONLY |
| char buffer_in[UART_BUFFER_SIZE]; |
| volatile char buffer_in_read_ind; |
| volatile char buffer_in_write_ind; |
| volatile char buffer_in_len; |
| volatile char buffer_in_len_tmp; |
| #endif |
| volatile char buffer_out[UART_BUFFER_SIZE]; |
| volatile char buffer_out_ind; |
| volatile char buffer_out_len; |
| } UART_DATA; |
| void UART_Init(UART_DATA *data); |
| void UART_Send_Interrupt_Handler(void); |
| void UART_Write(const char *string, char length); |
| void UART_WriteD(const char *string, char length); |
| #ifndef UART_TX_ONLY |
| void UART_Recv_Interrupt_Handler(void); |
| char UART_Buffer_Len(void); |
| char UART_Read_Buffer(char *buffer); |
| #endif |
| #endif |
| /PIC Stuff/PICX_12F1840/defines.h |
|---|
| 0,0 → 1,18 |
| #ifndef DEFINES_H |
| #define DEFINES_H |
| // Preprocessor define for __delay_ms() and __delay_us() |
| #define _XTAL_FREQ 32000000 |
| #define CPS_0_TRIS TRISAbits.TRISA0 |
| #define CPS_1_TRIS TRISAbits.TRISA1 |
| #define LED_TRIS TRISAbits.TRISA2 |
| #define LED_LAT LATAbits.LATA2 |
| #define UART_TX_TRIS TRISAbits.TRISA4 |
| #define PWM_TRIS TRISAbits.TRISA5 |
| #endif /* DEFINES_H */ |
| /PIC Stuff/PICX_12F1840/funclist |
|---|
| 0,0 → 1,15 |
| ___awdiv: CODE, 706 0 107 |
| ___aldiv: CODE, 436 0 152 |
| _CPS_Reset: CODE, 1066 0 5 |
| _PWM_Set_Width: CODE, 990 0 48 |
| _main: CODE, 813 0 63 |
| _Interrupt_Enable: CODE, 1080 0 3 |
| _InterruptHandler: CODE, 4 0 42 |
| ___lmul: CODE, 935 0 55 |
| __initialization: CODE, 1076 0 1 |
| _CPS_Timer_0_Interrupt_Handler: CODE, 48 0 388 |
| i1_CPS_Reset: CODE, 1071 0 5 |
| _CPS_Init: CODE, 588 0 118 |
| _PWM_Init: CODE, 1038 0 28 |
| _UART_Send_Interrupt_Handler: CODE, 876 0 59 |
| Total: 1074 |
| /PIC Stuff/PICX_12F1840/main.c |
|---|
| 0,0 → 1,87 |
| #include <xc.h> |
| #include "defines.h" |
| #include "base_INTERRUPTS.h" |
| //#include "base_UART.h" |
| #include "base_CPS.h" |
| #include "base_PWM.h" |
| // <editor-fold defaultstate="collapsed" desc="Configuration Registers"> |
| /* Config Register CONFIGL @ 0x8007 */ |
| #pragma config CPD = OFF // Data memory code protection is disabled |
| #pragma config BOREN = OFF // Brown-out Reset disabled |
| #pragma config IESO = OFF // Internal/External Switchover mode is disabled |
| #pragma config FOSC = INTOSC // INTOSC oscillator: I/O function on CLKIN pin |
| #pragma config FCMEN = OFF // Fail-Safe Clock Monitor is disabled |
| #pragma config MCLRE = ON // MCLR/VPP pin function is MCLR |
| #pragma config WDTE = OFF // WDT disabled |
| #pragma config CP = OFF // Program memory code protection is disabled |
| #pragma config PWRTE = OFF // PWRT disabled |
| #pragma config CLKOUTEN = OFF // CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin |
| /* Config Register CONFIG2 @ 0x8008 */ |
| #pragma config PLLEN = OFF // 4x PLL disabled |
| #pragma config WRT = OFF // Write protection off |
| #pragma config STVREN = OFF // Stack Overflow or Underflow will not cause a Reset |
| #pragma config BORV = HI // Brown-out Reset Voltage (Vbor), high trip point selected. |
| #pragma config LVP = OFF // High-voltage on MCLR/VPP must be used for programming |
| // </editor-fold> |
| int main() { |
| // Oscillator configuration (16Mhz HFINTOSC) |
| OSCCONbits.SCS = 0b00; |
| OSCCONbits.IRCF = 0b1111; |
| ANSELA = 0x00; // All pins set to digital I/O |
| APFCONbits.CCP1SEL = 1; // Switch CCP1 from RA2 to RA5 |
| APFCONbits.TXCKSEL = 1; // Switch TX/CK from RA0 to RA4 |
| APFCONbits.RXDTSEL = 1; // Switch RX/DT from RA1 to RA5 |
| /* Set pins as analog */ |
| /* 0x01 = ANSA0 (RA0) |
| * 0x02 = ANSA1 (RA1) |
| * 0x04 = ANSA2 (RA2) |
| * 0x10 = ANSA4 (RA4) */ |
| ANSELA = 0x03; |
| Interrupt_Enable(); |
| // UART_DATA uart_data; |
| // UART_Init(&uart_data); |
| CPS_DATA cps_data; |
| CPS_Init(&cps_data); |
| PWM_Init(); |
| // char msg[] = "Begin Program\n"; |
| // UART_Write(msg, 14); |
| LED_TRIS = 0; |
| while(1) { |
| // __delay_ms(10); |
| // unsigned int value = cps_data.btn_last_value[cps_data.channel]; |
| // unsigned int avg = cps_data.btn_avg_value[cps_data.channel]; |
| // unsigned char output[9]; |
| // output[0] = cps_data.channel; |
| // output[1] = 0; |
| // output[2] = value >> 8; |
| // output[3] = value; |
| // output[4] = 0; |
| // output[5] = avg >> 8; |
| // output[6] = avg; |
| // output[7] = 0; |
| // output[8] = cps_data.btn_pct_value[cps_data.channel]; |
| // UART_WriteD(output, 9); |
| if (cps_data.btn_pressed[0] || cps_data.btn_pressed[1]) { |
| LED_LAT = 1; |
| PWM_Set_Width(1350); |
| } else { |
| LED_LAT = 0; |
| PWM_Set_Width(800); |
| } |
| } |
| } |
| /PIC Stuff/PICX_12F1840/nbproject/Makefile-default.mk |
|---|
| 0,0 → 1,188 |
| # |
| # Generated Makefile - do not edit! |
| # |
| # Edit the Makefile in the project folder instead (../Makefile). Each target |
| # has a -pre and a -post target defined where you can add customized code. |
| # |
| # This makefile implements configuration specific macros and targets. |
| # Include project Makefile |
| ifeq "${IGNORE_LOCAL}" "TRUE" |
| # do not include local makefile. User is passing all local related variables already |
| else |
| include Makefile |
| # Include makefile containing local settings |
| ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk" |
| include nbproject/Makefile-local-default.mk |
| endif |
| endif |
| # Environment |
| MKDIR=gnumkdir -p |
| RM=rm -f |
| MV=mv |
| CP=cp |
| # Macros |
| CND_CONF=default |
| ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
| IMAGE_TYPE=debug |
| OUTPUT_SUFFIX=cof |
| DEBUGGABLE_SUFFIX=cof |
| FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
| else |
| IMAGE_TYPE=production |
| OUTPUT_SUFFIX=hex |
| DEBUGGABLE_SUFFIX=cof |
| FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
| endif |
| # Object Directory |
| OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE} |
| # Distribution Directory |
| DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE} |
| # Object Files Quoted if spaced |
| OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.p1 ${OBJECTDIR}/base_INTERRUPTS.p1 ${OBJECTDIR}/base_UART.p1 ${OBJECTDIR}/base_CPS.p1 ${OBJECTDIR}/base_PWM.p1 |
| POSSIBLE_DEPFILES=${OBJECTDIR}/main.p1.d ${OBJECTDIR}/base_INTERRUPTS.p1.d ${OBJECTDIR}/base_UART.p1.d ${OBJECTDIR}/base_CPS.p1.d ${OBJECTDIR}/base_PWM.p1.d |
| # Object Files |
| OBJECTFILES=${OBJECTDIR}/main.p1 ${OBJECTDIR}/base_INTERRUPTS.p1 ${OBJECTDIR}/base_UART.p1 ${OBJECTDIR}/base_CPS.p1 ${OBJECTDIR}/base_PWM.p1 |
| CFLAGS= |
| ASFLAGS= |
| LDLIBSOPTIONS= |
| ############# Tool locations ########################################## |
| # If you copy a project from one host to another, the path where the # |
| # compiler is installed may be different. # |
| # If you open this project with MPLAB X in the new host, this # |
| # makefile will be regenerated and the paths will be corrected. # |
| ####################################################################### |
| # fixDeps replaces a bunch of sed/cat/printf statements that slow down the build |
| FIXDEPS=fixDeps |
| .build-conf: ${BUILD_SUBPROJECTS} |
| ${MAKE} ${MAKE_OPTIONS} -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
| MP_PROCESSOR_OPTION=12F1840 |
| # ------------------------------------------------------------------------------------ |
| # Rules for buildStep: compile |
| ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
| ${OBJECTDIR}/main.p1: main.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/main.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/main.p1 main.c |
| @-${MV} ${OBJECTDIR}/main.d ${OBJECTDIR}/main.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/main.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_INTERRUPTS.p1: base_INTERRUPTS.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_INTERRUPTS.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_INTERRUPTS.p1 base_INTERRUPTS.c |
| @-${MV} ${OBJECTDIR}/base_INTERRUPTS.d ${OBJECTDIR}/base_INTERRUPTS.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_INTERRUPTS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_UART.p1: base_UART.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_UART.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_UART.p1 base_UART.c |
| @-${MV} ${OBJECTDIR}/base_UART.d ${OBJECTDIR}/base_UART.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_UART.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_CPS.p1: base_CPS.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_CPS.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_CPS.p1 base_CPS.c |
| @-${MV} ${OBJECTDIR}/base_CPS.d ${OBJECTDIR}/base_CPS.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_CPS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_PWM.p1: base_PWM.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_PWM.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_PWM.p1 base_PWM.c |
| @-${MV} ${OBJECTDIR}/base_PWM.d ${OBJECTDIR}/base_PWM.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_PWM.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| else |
| ${OBJECTDIR}/main.p1: main.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/main.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/main.p1 main.c |
| @-${MV} ${OBJECTDIR}/main.d ${OBJECTDIR}/main.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/main.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_INTERRUPTS.p1: base_INTERRUPTS.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_INTERRUPTS.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_INTERRUPTS.p1 base_INTERRUPTS.c |
| @-${MV} ${OBJECTDIR}/base_INTERRUPTS.d ${OBJECTDIR}/base_INTERRUPTS.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_INTERRUPTS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_UART.p1: base_UART.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_UART.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_UART.p1 base_UART.c |
| @-${MV} ${OBJECTDIR}/base_UART.d ${OBJECTDIR}/base_UART.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_UART.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_CPS.p1: base_CPS.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_CPS.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_CPS.p1 base_CPS.c |
| @-${MV} ${OBJECTDIR}/base_CPS.d ${OBJECTDIR}/base_CPS.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_CPS.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| ${OBJECTDIR}/base_PWM.p1: base_PWM.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/base_PWM.p1.d |
| ${MP_CC} --pass1 $(MP_EXTRA_CC_PRE) --chip=$(MP_PROCESSOR_OPTION) -Q -G --asmlist --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -o${OBJECTDIR}/base_PWM.p1 base_PWM.c |
| @-${MV} ${OBJECTDIR}/base_PWM.d ${OBJECTDIR}/base_PWM.p1.d |
| @${FIXDEPS} ${OBJECTDIR}/base_PWM.p1.d $(SILENT) -rsi ${MP_CC_DIR}../ |
| endif |
| # ------------------------------------------------------------------------------------ |
| # Rules for buildStep: assemble |
| ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
| else |
| endif |
| # ------------------------------------------------------------------------------------ |
| # Rules for buildStep: link |
| ifeq ($(TYPE_IMAGE), DEBUG_RUN) |
| dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} |
| ${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G --asmlist -mdist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.map -D__DEBUG=1 --debugger=pickit3 --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -odist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} |
| @${RM} dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.hex |
| else |
| dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} |
| ${MP_CC} $(MP_EXTRA_LD_PRE) --chip=$(MP_PROCESSOR_OPTION) -G --asmlist -mdist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.map --double=24 --float=24 --opt=default,+asm,-asmfile,+speed,-space,-debug,9 --addrqual=ignore -P -N255 --warn=0 --summary=default,-psect,-class,+mem,-hex,-file --runtime=default,+clear,+init,-keep,-no_startup,+osccal,-resetbits,-download,-stackcall,+clib "--errformat=%%f:%%l: error: %%s" "--warnformat=%%f:%%l: warning: %%s" "--msgformat=%%f:%%l: advisory: %%s" -odist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} |
| endif |
| # Subprojects |
| .build-subprojects: |
| # Subprojects |
| .clean-subprojects: |
| # Clean Targets |
| .clean-conf: ${CLEAN_SUBPROJECTS} |
| ${RM} -r build/default |
| ${RM} -r dist/default |
| # Enable dependency checking |
| .dep.inc: .depcheck-impl |
| DEPFILES=$(shell mplabwildcard ${POSSIBLE_DEPFILES}) |
| ifneq (${DEPFILES},) |
| include ${DEPFILES} |
| endif |
| /PIC Stuff/PICX_12F1840/nbproject/Makefile-genesis.properties |
|---|
| 0,0 → 1,8 |
| # |
| #Mon Jan 21 02:12:53 EST 2013 |
| default.languagetoolchain.dir=C\:\\Program Files (x86)\\Microchip\\xc8\\v1.12\\bin |
| com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=d94e033fce233e60ccb9abf3a212a9b7 |
| default.languagetoolchain.version=1.12 |
| host.platform=windows |
| conf.ids=default |
| default.com-microchip-mplab-nbide-toolchainXC8-XC8LanguageToolchain.md5=8fc157cf2b8157578b9f80e4bbee68f8 |
| /PIC Stuff/PICX_12F1840/nbproject/Makefile-impl.mk |
|---|
| 0,0 → 1,69 |
| # |
| # Generated Makefile - do not edit! |
| # |
| # Edit the Makefile in the project folder instead (../Makefile). Each target |
| # has a pre- and a post- target defined where you can add customization code. |
| # |
| # This makefile implements macros and targets common to all configurations. |
| # |
| # NOCDDL |
| # Building and Cleaning subprojects are done by default, but can be controlled with the SUB |
| # macro. If SUB=no, subprojects will not be built or cleaned. The following macro |
| # statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf |
| # and .clean-reqprojects-conf unless SUB has the value 'no' |
| SUB_no=NO |
| SUBPROJECTS=${SUB_${SUB}} |
| BUILD_SUBPROJECTS_=.build-subprojects |
| BUILD_SUBPROJECTS_NO= |
| BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}} |
| CLEAN_SUBPROJECTS_=.clean-subprojects |
| CLEAN_SUBPROJECTS_NO= |
| CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}} |
| # Project Name |
| PROJECTNAME=PICX_12F1840 |
| # Active Configuration |
| DEFAULTCONF=default |
| CONF=${DEFAULTCONF} |
| # All Configurations |
| ALLCONFS=default |
| # build |
| .build-impl: .build-pre |
| ${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf |
| # clean |
| .clean-impl: .clean-pre |
| ${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf |
| # clobber |
| .clobber-impl: .clobber-pre .depcheck-impl |
| ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean |
| # all |
| .all-impl: .all-pre .depcheck-impl |
| ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build |
| # dependency checking support |
| .depcheck-impl: |
| # @echo "# This code depends on make tool being used" >.dep.inc |
| # @if [ -n "${MAKE_VERSION}" ]; then \ |
| # echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \ |
| # echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \ |
| # echo "include \$${DEPFILES}" >>.dep.inc; \ |
| # echo "endif" >>.dep.inc; \ |
| # else \ |
| # echo ".KEEP_STATE:" >>.dep.inc; \ |
| # echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \ |
| # fi |
| /PIC Stuff/PICX_12F1840/nbproject/Makefile-local-default.mk |
|---|
| 0,0 → 1,37 |
| # |
| # Generated Makefile - do not edit! |
| # |
| # |
| # This file contains information about the location of compilers and other tools. |
| # If you commmit this file into your revision control server, you will be able to |
| # to checkout the project and build it from the command line with make. However, |
| # if more than one person works on the same project, then this file might show |
| # conflicts since different users are bound to have compilers in different places. |
| # In that case you might choose to not commit this file and let MPLAB X recreate this file |
| # for each user. The disadvantage of not commiting this file is that you must run MPLAB X at |
| # least once so the file gets created and the project can be built. Finally, you can also |
| # avoid using this file at all if you are only building from the command line with make. |
| # You can invoke make with the values of the macros: |
| # $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ... |
| # |
| SHELL=cmd.exe |
| PATH_TO_IDE_BIN=C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/ |
| # Adding MPLAB X bin directory to path. |
| PATH:=C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/:$(PATH) |
| # Path to java used to run MPLAB X when this makefile was created |
| MP_JAVA_PATH="C:\Program Files (x86)\Microchip\MPLABX\sys\java\jre1.6.0_32-windows-x64\java-windows/bin/" |
| OS_CURRENT="$(shell uname -s)" |
| MP_CC="C:\Program Files (x86)\Microchip\xc8\v1.12\bin\xc8.exe" |
| # MP_CPPC is not defined |
| # MP_BC is not defined |
| # MP_AS is not defined |
| # MP_LD is not defined |
| # MP_AR is not defined |
| DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/extractobjectdependencies.jar" |
| MP_CC_DIR="C:\Program Files (x86)\Microchip\xc8\v1.12\bin" |
| # MP_CPPC_DIR is not defined |
| # MP_BC_DIR is not defined |
| # MP_AS_DIR is not defined |
| # MP_LD_DIR is not defined |
| # MP_AR_DIR is not defined |
| # MP_BC_DIR is not defined |
| /PIC Stuff/PICX_12F1840/nbproject/Makefile-variables.mk |
|---|
| 0,0 → 1,13 |
| # |
| # Generated - do not edit! |
| # |
| # NOCDDL |
| # |
| CND_BASEDIR=`pwd` |
| # default configuration |
| CND_ARTIFACT_DIR_default=dist/default/production |
| CND_ARTIFACT_NAME_default=PICX_12F1840.production.hex |
| CND_ARTIFACT_PATH_default=dist/default/production/PICX_12F1840.production.hex |
| CND_PACKAGE_DIR_default=${CND_DISTDIR}/default/package |
| CND_PACKAGE_NAME_default=picx12f1840.tar |
| CND_PACKAGE_PATH_default=${CND_DISTDIR}/default/package/picx12f1840.tar |
| /PIC Stuff/PICX_12F1840/nbproject/Package-default.bash |
|---|
| 0,0 → 1,73 |
| #!/bin/bash -x |
| # |
| # Generated - do not edit! |
| # |
| # Macros |
| TOP=`pwd` |
| CND_CONF=default |
| CND_DISTDIR=dist |
| TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging |
| TMPDIRNAME=tmp-packaging |
| OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
| OUTPUT_BASENAME=PICX_12F1840.${IMAGE_TYPE}.${OUTPUT_SUFFIX} |
| PACKAGE_TOP_DIR=picx12f1840/ |
| # Functions |
| function checkReturnCode |
| { |
| rc=$? |
| if [ $rc != 0 ] |
| then |
| exit $rc |
| fi |
| } |
| function makeDirectory |
| # $1 directory path |
| # $2 permission (optional) |
| { |
| mkdir -p "$1" |
| checkReturnCode |
| if [ "$2" != "" ] |
| then |
| chmod $2 "$1" |
| checkReturnCode |
| fi |
| } |
| function copyFileToTmpDir |
| # $1 from-file path |
| # $2 to-file path |
| # $3 permission |
| { |
| cp "$1" "$2" |
| checkReturnCode |
| if [ "$3" != "" ] |
| then |
| chmod $3 "$2" |
| checkReturnCode |
| fi |
| } |
| # Setup |
| cd "${TOP}" |
| mkdir -p ${CND_DISTDIR}/${CND_CONF}/package |
| rm -rf ${TMPDIR} |
| mkdir -p ${TMPDIR} |
| # Copy files and create directories and links |
| cd "${TOP}" |
| makeDirectory ${TMPDIR}/picx12f1840/bin |
| copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755 |
| # Generate tar file |
| cd "${TOP}" |
| rm -f ${CND_DISTDIR}/${CND_CONF}/package/picx12f1840.tar |
| cd ${TMPDIR} |
| tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/picx12f1840.tar * |
| checkReturnCode |
| # Cleanup |
| cd "${TOP}" |
| rm -rf ${TMPDIR} |
| /PIC Stuff/PICX_12F1840/nbproject/configurations.xml |
|---|
| 0,0 → 1,102 |
| <?xml version="1.0" encoding="UTF-8"?> |
| <configurationDescriptor version="62"> |
| <logicalFolder name="root" displayName="root" projectFiles="true"> |
| <logicalFolder name="HeaderFiles" |
| displayName="Header Files" |
| projectFiles="true"> |
| <itemPath>base_INTERRUPTS.h</itemPath> |
| <itemPath>base_UART.h</itemPath> |
| <itemPath>defines.h</itemPath> |
| <itemPath>base_CPS.h</itemPath> |
| <itemPath>base_PWM.h</itemPath> |
| </logicalFolder> |
| <logicalFolder name="LinkerScript" |
| displayName="Linker Files" |
| projectFiles="true"> |
| </logicalFolder> |
| <logicalFolder name="SourceFiles" |
| displayName="Source Files" |
| projectFiles="true"> |
| <itemPath>main.c</itemPath> |
| <itemPath>base_INTERRUPTS.c</itemPath> |
| <itemPath>base_UART.c</itemPath> |
| <itemPath>base_CPS.c</itemPath> |
| <itemPath>base_PWM.c</itemPath> |
| </logicalFolder> |
| <logicalFolder name="ExternalFiles" |
| displayName="Important Files" |
| projectFiles="false"> |
| <itemPath>Makefile</itemPath> |
| </logicalFolder> |
| </logicalFolder> |
| <projectmakefile>Makefile</projectmakefile> |
| <confs> |
| <conf name="default" type="2"> |
| <toolsSet> |
| <developmentServer>localhost</developmentServer> |
| <targetDevice>PIC12F1840</targetDevice> |
| <targetHeader></targetHeader> |
| <targetPluginBoard></targetPluginBoard> |
| <platformTool>PICkit3PlatformTool</platformTool> |
| <languageToolchain>XC8</languageToolchain> |
| <languageToolchainVersion>1.12</languageToolchainVersion> |
| <platform>3</platform> |
| </toolsSet> |
| <compileType> |
| <linkerTool> |
| <linkerLibItems> |
| </linkerLibItems> |
| </linkerTool> |
| <loading> |
| <useAlternateLoadableFile>false</useAlternateLoadableFile> |
| <alternateLoadableFile></alternateLoadableFile> |
| </loading> |
| </compileType> |
| <makeCustomizationType> |
| <makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled> |
| <makeCustomizationPreStep></makeCustomizationPreStep> |
| <makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled> |
| <makeCustomizationPostStep></makeCustomizationPostStep> |
| <makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID> |
| <makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines> |
| <makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile> |
| </makeCustomizationType> |
| <HI-TECH-COMP> |
| </HI-TECH-COMP> |
| <HI-TECH-LINK> |
| </HI-TECH-LINK> |
| <PICkit3PlatformTool> |
| <property key="AutoSelectMemRanges" value="auto"/> |
| <property key="Freeze Peripherals" value="true"/> |
| <property key="SecureSegment.SegmentProgramming" value="FullChipProgramming"/> |
| <property key="ToolFirmwareFilePath" |
| value="Press to browse for a specific firmware version"/> |
| <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/> |
| <property key="hwtoolclock.frcindebug" value="false"/> |
| <property key="memories.aux" value="false"/> |
| <property key="memories.bootflash" value="false"/> |
| <property key="memories.configurationmemory" value="false"/> |
| <property key="memories.eeprom" value="false"/> |
| <property key="memories.flashdata" value="true"/> |
| <property key="memories.id" value="false"/> |
| <property key="memories.programmemory" value="true"/> |
| <property key="memories.programmemory.end" value="0xfff"/> |
| <property key="memories.programmemory.start" value="0x0"/> |
| <property key="poweroptions.powerenable" value="false"/> |
| <property key="programmertogo.imagename" value=""/> |
| <property key="programoptions.eraseb4program" value="true"/> |
| <property key="programoptions.pgmspeed" value="2"/> |
| <property key="programoptions.preserveeeprom" value="false"/> |
| <property key="programoptions.preserveprogramrange" value="false"/> |
| <property key="programoptions.preserveprogramrange.end" value="0xfff"/> |
| <property key="programoptions.preserveprogramrange.start" value="0x0"/> |
| <property key="programoptions.preserveuserid" value="false"/> |
| <property key="programoptions.usehighvoltageonmclr" value="false"/> |
| <property key="programoptions.uselvpprogramming" value="false"/> |
| <property key="voltagevalue" value="5.0"/> |
| </PICkit3PlatformTool> |
| <XC8-config-global> |
| </XC8-config-global> |
| </conf> |
| </confs> |
| </configurationDescriptor> |
| /PIC Stuff/PICX_12F1840/nbproject/private/SuppressibleMessageMemo.properties |
|---|
| 0,0 → 1,3 |
| # |
| #Thu Jan 17 20:22:21 EST 2013 |
| pk3/CHECK_4_HIGH_VOLTAGE_VPP=true |
| /PIC Stuff/PICX_12F1840/nbproject/private/configurations.xml |
|---|
| 0,0 → 1,25 |
| <?xml version="1.0" encoding="UTF-8"?> |
| <configurationDescriptor version="62"> |
| <projectmakefile>Makefile</projectmakefile> |
| <defaultConf>0</defaultConf> |
| <confs> |
| <conf name="default" type="2"> |
| <platformToolSN>:=MPLABCommUSB:=04D8:=900A:=0002:=Microchip Technology Inc.:=PICkit 3:=BUR114189291:=x:=en</platformToolSN> |
| <languageToolchainDir>C:\Program Files (x86)\Microchip\xc8\v1.12\bin</languageToolchainDir> |
| <mdbdebugger version="1"> |
| <placeholder1>place holder 1</placeholder1> |
| <placeholder2>place holder 2</placeholder2> |
| </mdbdebugger> |
| <runprofile version="6"> |
| <args></args> |
| <rundir></rundir> |
| <buildfirst>true</buildfirst> |
| <console-type>0</console-type> |
| <terminal-type>0</terminal-type> |
| <remove-instrumentation>0</remove-instrumentation> |
| <environment> |
| </environment> |
| </runprofile> |
| </conf> |
| </confs> |
| </configurationDescriptor> |
| /PIC Stuff/PICX_12F1840/nbproject/private/private.properties |
|---|
| --- nbproject/private/private.xml (nonexistent) |
| +++ nbproject/private/private.xml (revision 163) |
| @@ -0,0 +1,11 @@ |
| +<?xml version="1.0" encoding="UTF-8"?> |
| +<project-private xmlns="http://www.netbeans.org/ns/project-private/1"> |
| + <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/1"/> |
| + <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/1"> |
| + <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/defines.h</file> |
| + <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/base_CPS.h</file> |
| + <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/main.c</file> |
| + <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/base_UART.c</file> |
| + <file>file:/C:/Users/Kevin/Documents/Code/PICX_12F1840/base_CPS.c</file> |
| + </open-files> |
| +</project-private> |
| /PIC Stuff/PICX_12F1840/nbproject/project.properties |
|---|
| --- nbproject/project.xml (nonexistent) |
| +++ nbproject/project.xml (revision 163) |
| @@ -0,0 +1,16 @@ |
| +<?xml version="1.0" encoding="UTF-8"?> |
| +<project xmlns="http://www.netbeans.org/ns/project/1"> |
| + <type>com.microchip.mplab.nbide.embedded.makeproject</type> |
| + <configuration> |
| + <data xmlns="http://www.netbeans.org/ns/make-project/1"> |
| + <name>PICX_12F1840</name> |
| + <creation-uuid>7fe93e92-3ae3-42d5-9338-2afa3dbfcf6b</creation-uuid> |
| + <make-project-type>0</make-project-type> |
| + <c-extensions>c</c-extensions> |
| + <cpp-extensions/> |
| + <header-extensions>h</header-extensions> |
| + <sourceEncoding>ISO-8859-1</sourceEncoding> |
| + <make-dep-projects/> |
| + </data> |
| + </configuration> |
| +</project> |