| /PIC Stuff/Cerebot_32MX7_LED_Cube/SPI4.c |
|---|
| File deleted |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/SPI4.h |
|---|
| File deleted |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/ANIMATIONS.h |
|---|
| File deleted |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/ANIMATIONS.c |
|---|
| File deleted |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/defines.h |
|---|
| 1,8 → 1,8 |
| // PIC32MX795F512L |
| // Uncomment ONE of the following: |
| //#define CEREBOT_32MX7 |
| #define CEREBOT_MX7CK |
| #define CEREBOT_32MX7 |
| // #define CEREBOT_MX7CK |
| // Power supply must be 5V for proper operation of the board! |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/main.c |
|---|
| 20,8 → 20,8 |
| #pragma config FVBUSONIO = OFF // USB VBUS ON Selection |
| #pragma config FUSBIDIO = OFF // USB USID Selection |
| /* Other Peripheral Device Settings */ |
| #pragma config FWDTEN = ON // Watchdog Timer Enable |
| #pragma config WDTPS = PS1048576 // Watchdog Timer Postscaler (1048.576s) |
| #pragma config FWDTEN = OFF // Watchdog Timer Enable |
| #pragma config WDTPS = PS1024 // Watchdog Timer Postscaler |
| #pragma config FSRSSEL = PRIORITY_7 // SRS Interrupt Priority |
| #pragma config FCANIO = OFF // CAN I/O Pin Select (default/alternate) |
| #pragma config FETHIO = ON // Ethernet I/O Pin Select (default/alternate) |
| 41,16 → 41,24 |
| #include "defines.h" |
| #include "UART1.h" |
| #include "SPI1.h" |
| #include "SPI4.h" |
| #include "TIMER4.h" |
| #include "TIMER5.h" |
| #include "CUBE.h" |
| #include "BTN.h" |
| #include "ANIMATIONS.h" |
| void BTN1_Interrupt(void); |
| void BTN2_Interrupt(void); |
| void BTN3_Interrupt(void); |
| void Animation_Solid_Colors(int iterations, int delay_ms); |
| void Animation_Layer_Alternate(int iterations, int delay_ms); |
| void Animation_Pixel_Alternate(int iterations, int delay_ms); |
| void Animation_Full_Color_Sweep(int iterations, int delay_us); |
| void Animation_Row_Column_Sweep(int iterations, int delay_ms); |
| void Animation_Pixel_Sweep(int iterations, int delay_ms); |
| void Animation_Pseudo_Random_Colors(int iterations,int delay_ms); |
| void Animation_Random_Colors(int iterations, int delay_ms); |
| void Animation_Cube_In_Cube(int iterations, int delay_ms); |
| void Animation_Double_Rotation(int iterations, int delay_ms); |
| void Delay_MS(unsigned int delay_ms) { |
| // Delays the CPU for the given amount of time. |
| 69,8 → 77,6 |
| } |
| int main() { |
| // WARNING!! THIS BOARD WILL RESET EVERY 1048.576s DUE TO THE WDT!! |
| /* Configure the target for maximum performance at 80 MHz. */ |
| // Note: This overrides the peripheral clock to 80Mhz regardless of config |
| SYSTEMConfigPerformance(CPU_CLOCK_HZ); |
| 82,13 → 88,9 |
| AD1PCFGSET = 0xFFFF; |
| // Initialize the SPI1 module |
| SPI1_DATA spi_1_data; |
| SPI1_Init(&spi_1_data, NULL); |
| SPI1_DATA spi_data; |
| SPI1_Init(&spi_data, NULL); |
| // Initialize the SPI4 module |
| SPI4_DATA spi_4_data; |
| SPI4_Init(&spi_4_data); |
| // Initialize the UART1 module |
| UART1_DATA uart_data; |
| UART1_Init(&uart_data, &Cube_Data_In); |
| 109,7 → 111,7 |
| // Start the overlay rotation interrupt |
| TIMER4_DATA timer_4_data; |
| TIMER4_Init(&timer_4_data, &Cube_Text_Interrupt, 90000); |
| TIMER4_Init(&timer_4_data, &Cube_Text_Interrupt, 120000); |
| // Process button inputs |
| BTN_DATA btn_data; |
| 118,19 → 120,18 |
| // Begin display |
| // Cube_Set_All(RED); |
| // Delay_MS(2000); |
| // Delay_MS(6000); |
| // Cube_Set_All(GREEN); |
| // Delay_MS(2000); |
| // Delay_MS(6000); |
| // Cube_Set_All(BLUE); |
| // Delay_MS(2000); |
| // Animation_Pseudo_Random_Colors(10,300); |
| // Delay_MS(6000); |
| // char start_text[] = "Cube Initialized\r\n"; |
| // UART1_Write(start_text, 18); |
| // Set the overlay text |
| char text_string[] = "Welcome to the AMP Lab "; |
| Cube_Text_Init(text_string, 27, 0xFF, 0xFF, 0xFF); |
| char text_string[] = "Welcome to the CCM Lab "; |
| Cube_Text_Init(text_string, 26, 0xFF, 0xFF, 0xFF); |
| TIMER4_Start(); |
| // Loop through some preset animations |
| 142,10 → 143,8 |
| Animation_Row_Column_Sweep(2,40); |
| Animation_Cube_In_Cube(4,300); |
| Animation_Double_Rotation(2,40); |
| // Animation_Pseudo_Random_Colors(10,300); |
| Animation_Pseudo_Random_Colors(10,300); |
| // Animation_Random_Colors(10,300); |
| // ClearWDT(); // Clear the WDT if we dont want the board to reset |
| } |
| } |
| 232,3 → 231,353 |
| } |
| TIMER4_Start(); |
| } |
| void Animation_Solid_Colors(int iterations, int delay_ms) { |
| int i; |
| for (i = 0; i < iterations; i++) { |
| Cube_Set_All(RED); |
| Delay_MS(delay_ms); |
| Cube_Set_All(GREEN); |
| Delay_MS(delay_ms); |
| Cube_Set_All(BLUE); |
| Delay_MS(delay_ms); |
| } |
| } |
| void Animation_Layer_Alternate(int iterations, int delay_ms) { |
| int i,z; |
| for (z = 0; z < iterations; z++) { |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| if (i % 3 == 0) |
| Cube_Set_Layer(i,RED); |
| else if (i % 3 == 1) |
| Cube_Set_Layer(i,GREEN); |
| else |
| Cube_Set_Layer(i,BLUE); |
| } |
| Delay_MS(delay_ms); |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| if (i % 3 == 0) |
| Cube_Set_Layer(i,GREEN); |
| else if (i % 3 == 1) |
| Cube_Set_Layer(i,BLUE); |
| else |
| Cube_Set_Layer(i,RED); |
| } |
| Delay_MS(delay_ms); |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| if (i % 3 == 0) |
| Cube_Set_Layer(i,BLUE); |
| else if (i % 3 == 1) |
| Cube_Set_Layer(i,RED); |
| else |
| Cube_Set_Layer(i,GREEN); |
| } |
| Delay_MS(delay_ms); |
| } |
| } |
| void Animation_Pixel_Alternate(int iterations, int delay_ms) { |
| int i,j,k,z; |
| for (z = 0; z < iterations; z++) { |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| Cube_Clear(); |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) { |
| int var = (j * 8) + k; |
| if (var % 3 == 0) |
| Cube_Set_Pixel(i,j,k,RED); |
| else if (var % 3 == 1) |
| Cube_Set_Pixel(i,j,k,GREEN); |
| else |
| Cube_Set_Pixel(i,j,k,BLUE); |
| } |
| } |
| Delay_MS(delay_ms); |
| Cube_Clear(); |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) { |
| int var = (j * 8) + k; |
| if (var % 3 == 0) |
| Cube_Set_Pixel(i,j,k,GREEN); |
| else if (var % 3 == 1) |
| Cube_Set_Pixel(i,j,k,BLUE); |
| else |
| Cube_Set_Pixel(i,j,k,RED); |
| } |
| } |
| Delay_MS(delay_ms); |
| Cube_Clear(); |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) { |
| int var = (j * 8) + k; |
| if (var % 3 == 0) |
| Cube_Set_Pixel(i,j,k,BLUE); |
| else if (var % 3 == 1) |
| Cube_Set_Pixel(i,j,k,RED); |
| else |
| Cube_Set_Pixel(i,j,k,GREEN); |
| } |
| } |
| Delay_MS(delay_ms); |
| } |
| } |
| } |
| void Animation_Full_Color_Sweep(int iterations, int delay_us) { |
| int i,z; |
| for (z = 0; z < iterations; z++) { |
| for (i = 0; i < 0x0FF; i+=2) { |
| Cube_Set_All(i,0,0); |
| Delay_US(delay_us); |
| } |
| for (i = 0; i < 0x0FF; i+=2) { |
| Cube_Set_All(0x0FF,i,0); |
| Delay_US(delay_us); |
| } |
| for (i = 0x0FF; i >= 0; i-=2) { |
| Cube_Set_All(i,0x0FF,0); |
| Delay_US(delay_us); |
| } |
| for (i = 0; i < 0x0FF; i+=2) { |
| Cube_Set_All(0,0x0FF,i); |
| Delay_US(delay_us); |
| } |
| for (i = 0; i < 0x0FF; i+=2) { |
| Cube_Set_All(i,0x0FF,0x0FF); |
| Delay_US(delay_us); |
| } |
| for (i = 0x0FF; i >= 0; i-=2) { |
| Cube_Set_All(0x0FF,i,0x0FF); |
| Delay_US(delay_us); |
| } |
| for (i = 0x0FF; i >= 0; i-=2) { |
| Cube_Set_All(i,0,0x0FF); |
| Delay_US(delay_us); |
| } |
| for (i = 0x100; i >= 0; i-=2) { |
| Cube_Set_All(0,0,i); |
| Delay_US(delay_us); |
| } |
| } |
| } |
| void Animation_Row_Column_Sweep(int iterations, int delay_ms) { |
| int i,j,k,a,z; |
| for (z = 0; z < iterations; z++) { |
| for (i = 0; i < 3; i++) { |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| Cube_Clear(); |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) |
| if (i % 3 == 0) |
| for (a = 0; a < CUBE_LAYER_COUNT; a++) |
| Cube_Set_Pixel(a,j,k,RED); |
| else if (i % 3 == 1) |
| for (a = 0; a < CUBE_LAYER_COUNT; a++) |
| Cube_Set_Pixel(a,j,k,GREEN); |
| else |
| for (a = 0; a < CUBE_LAYER_COUNT; a++) |
| Cube_Set_Pixel(a,j,k,BLUE); |
| Delay_MS(delay_ms); |
| } |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| Cube_Clear(); |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) |
| if (i % 3 == 0) |
| for (a = 0; a < CUBE_LAYER_COUNT; a++) |
| Cube_Set_Pixel(a,k,j,RED); |
| else if (i % 3 == 1) |
| for (a = 0; a < CUBE_LAYER_COUNT; a++) |
| Cube_Set_Pixel(a,k,j,GREEN); |
| else |
| for (a = 0; a < CUBE_LAYER_COUNT; a++) |
| Cube_Set_Pixel(a,k,j,BLUE); |
| Delay_MS(delay_ms); |
| } |
| for (j = CUBE_LAYER_COUNT-1; j >= 0; j--) { |
| Cube_Clear(); |
| if (i % 3 == 0) { |
| for (k = 0; k < CUBE_LAYER_COUNT; k++) |
| if (k == j) |
| Cube_Set_Layer(k,RED); |
| } else if (i % 3 == 1) { |
| for (k = 0; k < CUBE_LAYER_COUNT; k++) |
| if (k == j) |
| Cube_Set_Layer(k,GREEN); |
| } else { |
| for (k = 0; k < CUBE_LAYER_COUNT; k++) |
| if (k == j) |
| Cube_Set_Layer(k,BLUE); |
| } |
| Delay_MS(delay_ms); |
| } |
| } |
| } |
| } |
| void Animation_Pixel_Sweep(int iterations, int delay_ms) { |
| int i,j,k,z,a; |
| for (z = 0; z < iterations; z++) { |
| for (a = 0; a < 3; a++) { |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) { |
| Cube_Clear(); |
| if (a % 3 == 0) { |
| Cube_Set_Pixel(i,j,k,RED); |
| } else if (a % 3 == 1) { |
| Cube_Set_Pixel(i,j,k,GREEN); |
| } else { |
| Cube_Set_Pixel(i,j,k,BLUE); |
| } |
| Delay_MS(delay_ms); |
| } |
| } |
| } |
| } |
| } |
| } |
| void Animation_Pseudo_Random_Colors(int iterations, int delay_ms) { |
| int i,j,k,z; |
| for (z = 0; z < iterations; z++) { |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) { |
| unsigned int a = rand(); |
| if (a % 5 == 0) |
| Cube_Set_Pixel(i,j,k,RED); |
| else if (a % 5 == 1) |
| Cube_Set_Pixel(i,j,k,GREEN); |
| else if (a % 5 == 2) |
| Cube_Set_Pixel(i,j,k,BLUE); |
| else if (a % 5 == 3) |
| Cube_Set_Pixel(i,j,k,PURPLE); |
| else if (a % 5 == 4) |
| Cube_Set_Pixel(i,j,k,YELLOW); |
| else |
| Cube_Set_Pixel(i,j,k,ORANGE); |
| } |
| } |
| } |
| Delay_MS(delay_ms); |
| } |
| } |
| void Animation_Random_Colors(int iterations, int delay_ms) { |
| int i,j,k,z; |
| for (z = 0; z < iterations; z++) { |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| for (j = 0; j < CUBE_ROW_COUNT; j++) { |
| for (k = 0; k < CUBE_COLUMN_COUNT; k++) { |
| Cube_Set_Pixel(i,j,k,rand()&0x0FF,rand()&0x0FF,rand()&0x0FF); |
| } |
| } |
| } |
| Delay_MS(delay_ms); |
| } |
| } |
| void Animation_Cube_In_Cube(int iterations, int delay_ms) { |
| int z,x,i,j,k; |
| for (z = 0; z < iterations; z++) { |
| for (x = 0; x < 5; x++) { |
| Cube_Clear(); |
| for (i = 0; i < CUBE_LAYER_COUNT; i++) { |
| if ((x == 0 || x == 4)&&(i == 0 || i == 7)) { |
| Cube_Set_Layer(i,RED); |
| } else if ((x == 1 || x == 4)&&(i == 1 || i == 6)) { |
| for (j = 1; j < CUBE_ROW_COUNT-1; j++) |
| for (k = 1; k < CUBE_COLUMN_COUNT-1; k++) |
| Cube_Set_Pixel(i,j,k,YELLOW); |
| } else if ((x == 2 || x == 4)&&(i == 2 || i == 5)) { |
| for (j = 2; j < CUBE_ROW_COUNT-2; j++) |
| for (k = 2; k < CUBE_COLUMN_COUNT-2; k++) |
| Cube_Set_Pixel(i,j,k,GREEN); |
| } else if ((x == 3 || x == 4)&&(i == 3 || i == 4)) { |
| for (j = 3; j < CUBE_ROW_COUNT-3; j++) |
| for (k = 3; k < CUBE_COLUMN_COUNT-3; k++) |
| Cube_Set_Pixel(i,j,k,BLUE); |
| } |
| if ((x == 0 || x == 4)&&(i > 0 && i < 8)) { |
| for (j = 0; j < 8; j++) { |
| Cube_Set_Pixel(i,j,0,RED); |
| Cube_Set_Pixel(i,j,7,RED); |
| Cube_Set_Pixel(i,0,j,RED); |
| Cube_Set_Pixel(i,7,j,RED); |
| } |
| } |
| if ((x == 1 || x == 4)&&(i > 1 && i < 7)) { |
| for (j = 1; j < 7; j++) { |
| Cube_Set_Pixel(i,j,1,YELLOW); |
| Cube_Set_Pixel(i,j,6,YELLOW); |
| Cube_Set_Pixel(i,1,j,YELLOW); |
| Cube_Set_Pixel(i,6,j,YELLOW); |
| } |
| } |
| if ((x == 2 || x == 4)&&(i > 2 && i < 6)) { |
| for (j = 2; j < 6; j++) { |
| Cube_Set_Pixel(i,j,2,GREEN); |
| Cube_Set_Pixel(i,j,5,GREEN); |
| Cube_Set_Pixel(i,2,j,GREEN); |
| Cube_Set_Pixel(i,5,j,GREEN); |
| } |
| } |
| } |
| Delay_MS(delay_ms); |
| } |
| } |
| } |
| void Animation_Double_Rotation(int iterations, int delay_ms) { |
| Cube_Clear(); |
| int i,x,y,z; |
| for (z = 0; z < 3; z++) { |
| switch (z % 3) { |
| case 0: |
| for (y = 0; y < CUBE_LAYER_COUNT; y++) { |
| Cube_Set_Pixel(y,0,0,RED); |
| Cube_Set_Pixel(y,1,1,RED); |
| Cube_Set_Pixel(y,2,2,RED); |
| Cube_Set_Pixel(y,3,3,RED); |
| Cube_Set_Pixel(y,4,4,RED); |
| Cube_Set_Pixel(y,5,5,RED); |
| Cube_Set_Pixel(y,6,6,RED); |
| Cube_Set_Pixel(y,7,7,RED); |
| } |
| break; |
| case 1: |
| for (y = 0; y < CUBE_LAYER_COUNT; y++) { |
| Cube_Set_Pixel(y,0,0,GREEN); |
| Cube_Set_Pixel(y,1,1,GREEN); |
| Cube_Set_Pixel(y,2,2,GREEN); |
| Cube_Set_Pixel(y,3,3,GREEN); |
| Cube_Set_Pixel(y,4,4,GREEN); |
| Cube_Set_Pixel(y,5,5,GREEN); |
| Cube_Set_Pixel(y,6,6,GREEN); |
| Cube_Set_Pixel(y,7,7,GREEN); |
| } |
| break; |
| case 2: |
| for (y = 0; y < CUBE_LAYER_COUNT; y++) { |
| Cube_Set_Pixel(y,0,0,BLUE); |
| Cube_Set_Pixel(y,1,1,BLUE); |
| Cube_Set_Pixel(y,2,2,BLUE); |
| Cube_Set_Pixel(y,3,3,BLUE); |
| Cube_Set_Pixel(y,4,4,BLUE); |
| Cube_Set_Pixel(y,5,5,BLUE); |
| Cube_Set_Pixel(y,6,6,BLUE); |
| Cube_Set_Pixel(y,7,7,BLUE); |
| } |
| break; |
| } |
| for (i = 0; i < iterations; i++) { |
| for (x = 0; x < 28; x++) { |
| Delay_MS(delay_ms); |
| Cube_Rotate(0); |
| } |
| } |
| } |
| } |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/nbproject/Makefile-genesis.properties |
|---|
| 1,8 → 1,8 |
| # |
| #Wed Nov 13 12:09:13 EST 2013 |
| default.com-microchip-mplab-nbide-toolchainXC32-XC32LanguageToolchain.md5=a7430524a414be59f5ce2a8f8797db6d |
| default.languagetoolchain.dir=C\:\\Program Files (x86)\\Microchip\\xc32\\v1.21\\bin |
| com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=0d2b1469ad71adb787c711a416386331 |
| default.languagetoolchain.version=1.21 |
| #Mon Aug 12 23:04:12 EDT 2013 |
| default.com-microchip-mplab-nbide-toolchainXC32-XC32LanguageToolchain.md5=6b4fa04caf3910c7c3a4666b1aea8c5c |
| default.languagetoolchain.dir=C\:\\Program Files (x86)\\Microchip\\xc32\\v1.20\\bin |
| com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=415494acd195d89b2f6d7a36797a5ab4 |
| default.languagetoolchain.version=1.20 |
| host.platform=windows |
| conf.ids=default |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/nbproject/Makefile-default.mk |
|---|
| 44,20 → 44,14 |
| # Distribution Directory |
| DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE} |
| # Source Files Quoted if spaced |
| SOURCEFILES_QUOTED_IF_SPACED=main.c SPI1.c TIMER5.c CUBE.c PWM2.c BTN.c TIMER4.c UART1.c SPI4.c ANIMATIONS.c |
| # Object Files Quoted if spaced |
| OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.o ${OBJECTDIR}/SPI1.o ${OBJECTDIR}/TIMER5.o ${OBJECTDIR}/CUBE.o ${OBJECTDIR}/PWM2.o ${OBJECTDIR}/BTN.o ${OBJECTDIR}/TIMER4.o ${OBJECTDIR}/UART1.o ${OBJECTDIR}/SPI4.o ${OBJECTDIR}/ANIMATIONS.o |
| POSSIBLE_DEPFILES=${OBJECTDIR}/main.o.d ${OBJECTDIR}/SPI1.o.d ${OBJECTDIR}/TIMER5.o.d ${OBJECTDIR}/CUBE.o.d ${OBJECTDIR}/PWM2.o.d ${OBJECTDIR}/BTN.o.d ${OBJECTDIR}/TIMER4.o.d ${OBJECTDIR}/UART1.o.d ${OBJECTDIR}/SPI4.o.d ${OBJECTDIR}/ANIMATIONS.o.d |
| OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.o ${OBJECTDIR}/SPI1.o ${OBJECTDIR}/TIMER5.o ${OBJECTDIR}/CUBE.o ${OBJECTDIR}/PWM2.o ${OBJECTDIR}/BTN.o ${OBJECTDIR}/TIMER4.o ${OBJECTDIR}/UART1.o |
| POSSIBLE_DEPFILES=${OBJECTDIR}/main.o.d ${OBJECTDIR}/SPI1.o.d ${OBJECTDIR}/TIMER5.o.d ${OBJECTDIR}/CUBE.o.d ${OBJECTDIR}/PWM2.o.d ${OBJECTDIR}/BTN.o.d ${OBJECTDIR}/TIMER4.o.d ${OBJECTDIR}/UART1.o.d |
| # Object Files |
| OBJECTFILES=${OBJECTDIR}/main.o ${OBJECTDIR}/SPI1.o ${OBJECTDIR}/TIMER5.o ${OBJECTDIR}/CUBE.o ${OBJECTDIR}/PWM2.o ${OBJECTDIR}/BTN.o ${OBJECTDIR}/TIMER4.o ${OBJECTDIR}/UART1.o ${OBJECTDIR}/SPI4.o ${OBJECTDIR}/ANIMATIONS.o |
| OBJECTFILES=${OBJECTDIR}/main.o ${OBJECTDIR}/SPI1.o ${OBJECTDIR}/TIMER5.o ${OBJECTDIR}/CUBE.o ${OBJECTDIR}/PWM2.o ${OBJECTDIR}/BTN.o ${OBJECTDIR}/TIMER4.o ${OBJECTDIR}/UART1.o |
| # Source Files |
| SOURCEFILES=main.c SPI1.c TIMER5.c CUBE.c PWM2.c BTN.c TIMER4.c UART1.c SPI4.c ANIMATIONS.c |
| CFLAGS= |
| ASFLAGS= |
| LDLIBSOPTIONS= |
| 94,124 → 88,84 |
| ${OBJECTDIR}/main.o: main.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/main.o.d |
| @${RM} ${OBJECTDIR}/main.o |
| @${FIXDEPS} "${OBJECTDIR}/main.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/main.o.d" -o ${OBJECTDIR}/main.o main.c |
| ${OBJECTDIR}/SPI1.o: SPI1.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/SPI1.o.d |
| @${RM} ${OBJECTDIR}/SPI1.o |
| @${FIXDEPS} "${OBJECTDIR}/SPI1.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/SPI1.o.d" -o ${OBJECTDIR}/SPI1.o SPI1.c |
| ${OBJECTDIR}/TIMER5.o: TIMER5.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/TIMER5.o.d |
| @${RM} ${OBJECTDIR}/TIMER5.o |
| @${FIXDEPS} "${OBJECTDIR}/TIMER5.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/TIMER5.o.d" -o ${OBJECTDIR}/TIMER5.o TIMER5.c |
| ${OBJECTDIR}/CUBE.o: CUBE.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/CUBE.o.d |
| @${RM} ${OBJECTDIR}/CUBE.o |
| @${FIXDEPS} "${OBJECTDIR}/CUBE.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/CUBE.o.d" -o ${OBJECTDIR}/CUBE.o CUBE.c |
| ${OBJECTDIR}/PWM2.o: PWM2.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/PWM2.o.d |
| @${RM} ${OBJECTDIR}/PWM2.o |
| @${FIXDEPS} "${OBJECTDIR}/PWM2.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/PWM2.o.d" -o ${OBJECTDIR}/PWM2.o PWM2.c |
| ${OBJECTDIR}/BTN.o: BTN.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/BTN.o.d |
| @${RM} ${OBJECTDIR}/BTN.o |
| @${FIXDEPS} "${OBJECTDIR}/BTN.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/BTN.o.d" -o ${OBJECTDIR}/BTN.o BTN.c |
| ${OBJECTDIR}/TIMER4.o: TIMER4.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/TIMER4.o.d |
| @${RM} ${OBJECTDIR}/TIMER4.o |
| @${FIXDEPS} "${OBJECTDIR}/TIMER4.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/TIMER4.o.d" -o ${OBJECTDIR}/TIMER4.o TIMER4.c |
| ${OBJECTDIR}/UART1.o: UART1.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/UART1.o.d |
| @${RM} ${OBJECTDIR}/UART1.o |
| @${FIXDEPS} "${OBJECTDIR}/UART1.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/UART1.o.d" -o ${OBJECTDIR}/UART1.o UART1.c |
| ${OBJECTDIR}/SPI4.o: SPI4.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/SPI4.o.d |
| @${RM} ${OBJECTDIR}/SPI4.o |
| @${FIXDEPS} "${OBJECTDIR}/SPI4.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/SPI4.o.d" -o ${OBJECTDIR}/SPI4.o SPI4.c |
| ${OBJECTDIR}/ANIMATIONS.o: ANIMATIONS.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/ANIMATIONS.o.d |
| @${RM} ${OBJECTDIR}/ANIMATIONS.o |
| @${FIXDEPS} "${OBJECTDIR}/ANIMATIONS.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1 -fframe-base-loclist -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/ANIMATIONS.o.d" -o ${OBJECTDIR}/ANIMATIONS.o ANIMATIONS.c |
| else |
| ${OBJECTDIR}/main.o: main.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/main.o.d |
| @${RM} ${OBJECTDIR}/main.o |
| @${FIXDEPS} "${OBJECTDIR}/main.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/main.o.d" -o ${OBJECTDIR}/main.o main.c |
| ${OBJECTDIR}/SPI1.o: SPI1.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/SPI1.o.d |
| @${RM} ${OBJECTDIR}/SPI1.o |
| @${FIXDEPS} "${OBJECTDIR}/SPI1.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/SPI1.o.d" -o ${OBJECTDIR}/SPI1.o SPI1.c |
| ${OBJECTDIR}/TIMER5.o: TIMER5.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/TIMER5.o.d |
| @${RM} ${OBJECTDIR}/TIMER5.o |
| @${FIXDEPS} "${OBJECTDIR}/TIMER5.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/TIMER5.o.d" -o ${OBJECTDIR}/TIMER5.o TIMER5.c |
| ${OBJECTDIR}/CUBE.o: CUBE.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/CUBE.o.d |
| @${RM} ${OBJECTDIR}/CUBE.o |
| @${FIXDEPS} "${OBJECTDIR}/CUBE.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/CUBE.o.d" -o ${OBJECTDIR}/CUBE.o CUBE.c |
| ${OBJECTDIR}/PWM2.o: PWM2.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/PWM2.o.d |
| @${RM} ${OBJECTDIR}/PWM2.o |
| @${FIXDEPS} "${OBJECTDIR}/PWM2.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/PWM2.o.d" -o ${OBJECTDIR}/PWM2.o PWM2.c |
| ${OBJECTDIR}/BTN.o: BTN.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/BTN.o.d |
| @${RM} ${OBJECTDIR}/BTN.o |
| @${FIXDEPS} "${OBJECTDIR}/BTN.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/BTN.o.d" -o ${OBJECTDIR}/BTN.o BTN.c |
| ${OBJECTDIR}/TIMER4.o: TIMER4.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/TIMER4.o.d |
| @${RM} ${OBJECTDIR}/TIMER4.o |
| @${FIXDEPS} "${OBJECTDIR}/TIMER4.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/TIMER4.o.d" -o ${OBJECTDIR}/TIMER4.o TIMER4.c |
| ${OBJECTDIR}/UART1.o: UART1.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/UART1.o.d |
| @${RM} ${OBJECTDIR}/UART1.o |
| @${FIXDEPS} "${OBJECTDIR}/UART1.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/UART1.o.d" -o ${OBJECTDIR}/UART1.o UART1.c |
| ${OBJECTDIR}/SPI4.o: SPI4.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/SPI4.o.d |
| @${RM} ${OBJECTDIR}/SPI4.o |
| @${FIXDEPS} "${OBJECTDIR}/SPI4.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/SPI4.o.d" -o ${OBJECTDIR}/SPI4.o SPI4.c |
| ${OBJECTDIR}/ANIMATIONS.o: ANIMATIONS.c nbproject/Makefile-${CND_CONF}.mk |
| @${MKDIR} ${OBJECTDIR} |
| @${RM} ${OBJECTDIR}/ANIMATIONS.o.d |
| @${RM} ${OBJECTDIR}/ANIMATIONS.o |
| @${FIXDEPS} "${OBJECTDIR}/ANIMATIONS.o.d" $(SILENT) -rsi ${MP_CC_DIR}../ -c ${MP_CC} $(MP_EXTRA_CC_PRE) -g -x c -c -mprocessor=$(MP_PROCESSOR_OPTION) -O1 -funroll-loops -MMD -MF "${OBJECTDIR}/ANIMATIONS.o.d" -o ${OBJECTDIR}/ANIMATIONS.o ANIMATIONS.c |
| endif |
| # ------------------------------------------------------------------------------------ |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/nbproject/configurations.xml |
|---|
| 13,8 → 13,6 |
| <itemPath>TIMER4.h</itemPath> |
| <itemPath>glcdfont.h</itemPath> |
| <itemPath>UART1.h</itemPath> |
| <itemPath>SPI4.h</itemPath> |
| <itemPath>ANIMATIONS.h</itemPath> |
| </logicalFolder> |
| <logicalFolder name="LinkerScript" |
| displayName="Linker Files" |
| 31,8 → 29,6 |
| <itemPath>BTN.c</itemPath> |
| <itemPath>TIMER4.c</itemPath> |
| <itemPath>UART1.c</itemPath> |
| <itemPath>SPI4.c</itemPath> |
| <itemPath>ANIMATIONS.c</itemPath> |
| </logicalFolder> |
| <logicalFolder name="ExternalFiles" |
| displayName="Important Files" |
| 50,7 → 46,7 |
| <targetPluginBoard></targetPluginBoard> |
| <platformTool>PK3OBPlatformTool</platformTool> |
| <languageToolchain>XC32</languageToolchain> |
| <languageToolchainVersion>1.21</languageToolchainVersion> |
| <languageToolchainVersion>1.20</languageToolchainVersion> |
| <platform>3</platform> |
| </toolsSet> |
| <compileType> |
| 168,7 → 164,6 |
| <property key="ToolFirmwareFilePath" |
| value="Press to browse for a specific firmware version"/> |
| <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/> |
| <property key="firmware.download.all" value="false"/> |
| <property key="memories.bootflash" value="false"/> |
| <property key="memories.configurationmemory" value="false"/> |
| <property key="memories.eeprom" value="false"/> |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/nbproject/private/configurations.xml |
|---|
| 4,8 → 4,8 |
| <defaultConf>0</defaultConf> |
| <confs> |
| <conf name="default" type="2"> |
| <platformToolSN>:=MPLABCommUSB:=04D8:=8108:=0002:=Digilent:=Cerebot 32MX7:=D370400:=x:=en</platformToolSN> |
| <languageToolchainDir>C:\Program Files (x86)\Microchip\xc32\v1.21\bin</languageToolchainDir> |
| <platformToolSN>:=MPLABCommUSB:=04D8:=8108:=0002:=Digilent:=CerebotMX7CK:=D459520:=x:=en</platformToolSN> |
| <languageToolchainDir>C:\Program Files (x86)\Microchip\xc32\v1.20\bin</languageToolchainDir> |
| <mdbdebugger version="1"> |
| <placeholder1>place holder 1</placeholder1> |
| <placeholder2>place holder 2</placeholder2> |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/nbproject/private/private.xml |
|---|
| 1,3 → 1,4 |
| <?xml version="1.0" encoding="UTF-8"?><project-private xmlns="http://www.netbeans.org/ns/project-private/1"> |
| <?xml version="1.0" encoding="UTF-8"?> |
| <project-private xmlns="http://www.netbeans.org/ns/project-private/1"> |
| <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/1"/> |
| </project-private> |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/nbproject/Makefile-local-default.mk |
|---|
| 19,19 → 19,19 |
| # Adding MPLAB X bin directory to path. |
| PATH:=C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/:$(PATH) |
| # Path to java used to run MPLAB X when this makefile was created |
| MP_JAVA_PATH="C:\Program Files (x86)\Microchip\MPLABX\sys\java\jre1.7.0_17/bin/" |
| MP_JAVA_PATH="C:\Program Files (x86)\Microchip\MPLABX\sys\java\jre1.6.0_32-windows-x64\java-windows/bin/" |
| OS_CURRENT="$(shell uname -s)" |
| MP_CC="C:\Program Files (x86)\Microchip\xc32\v1.21\bin\xc32-gcc.exe" |
| MP_CPPC="C:\Program Files (x86)\Microchip\xc32\v1.21\bin\xc32-g++.exe" |
| MP_CC="C:\Program Files (x86)\Microchip\xc32\v1.20\bin\xc32-gcc.exe" |
| MP_CPPC="C:\Program Files (x86)\Microchip\xc32\v1.20\bin\xc32-g++.exe" |
| # MP_BC is not defined |
| MP_AS="C:\Program Files (x86)\Microchip\xc32\v1.21\bin\xc32-as.exe" |
| MP_LD="C:\Program Files (x86)\Microchip\xc32\v1.21\bin\xc32-ld.exe" |
| MP_AR="C:\Program Files (x86)\Microchip\xc32\v1.21\bin\xc32-ar.exe" |
| MP_AS="C:\Program Files (x86)\Microchip\xc32\v1.20\bin\xc32-as.exe" |
| MP_LD="C:\Program Files (x86)\Microchip\xc32\v1.20\bin\xc32-ld.exe" |
| MP_AR="C:\Program Files (x86)\Microchip\xc32\v1.20\bin\xc32-ar.exe" |
| DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files (x86)/Microchip/MPLABX/mplab_ide/mplab_ide/modules/../../bin/extractobjectdependencies.jar" |
| MP_CC_DIR="C:\Program Files (x86)\Microchip\xc32\v1.21\bin" |
| MP_CPPC_DIR="C:\Program Files (x86)\Microchip\xc32\v1.21\bin" |
| MP_CC_DIR="C:\Program Files (x86)\Microchip\xc32\v1.20\bin" |
| MP_CPPC_DIR="C:\Program Files (x86)\Microchip\xc32\v1.20\bin" |
| # MP_BC_DIR is not defined |
| MP_AS_DIR="C:\Program Files (x86)\Microchip\xc32\v1.21\bin" |
| MP_LD_DIR="C:\Program Files (x86)\Microchip\xc32\v1.21\bin" |
| MP_AR_DIR="C:\Program Files (x86)\Microchip\xc32\v1.21\bin" |
| MP_AS_DIR="C:\Program Files (x86)\Microchip\xc32\v1.20\bin" |
| MP_LD_DIR="C:\Program Files (x86)\Microchip\xc32\v1.20\bin" |
| MP_AR_DIR="C:\Program Files (x86)\Microchip\xc32\v1.20\bin" |
| # MP_BC_DIR is not defined |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/nbproject/project.xml |
|---|
| 1,4 → 1,5 |
| <?xml version="1.0" encoding="UTF-8"?><project xmlns="http://www.netbeans.org/ns/project/1"> |
| <?xml version="1.0" encoding="UTF-8"?> |
| <project xmlns="http://www.netbeans.org/ns/project/1"> |
| <type>com.microchip.mplab.nbide.embedded.makeproject</type> |
| <configuration> |
| <data xmlns="http://www.netbeans.org/ns/make-project/1"> |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/SPI1.c |
|---|
| 45,19 → 45,19 |
| INTEnableInterrupts(); |
| } |
| int SPI1_Write(char *array, int length, void (*tx_callback)(void)) { |
| int SPI1_Write(unsigned char *array, unsigned int count, void (*tx_callback)(void)) { |
| spi_data_ptr->tx_callback = tx_callback; |
| if (length > SPI1_BUFFER_OUT_SIZE) |
| if (count > SPI1_BUFFER_SIZE) |
| return 0; |
| if (spi_data_ptr->buffer_out_len != 0) |
| return 0; |
| // Put the data to send into the outbound buffer |
| spi_data_ptr->buffer_out_len = length; |
| spi_data_ptr->buffer_out_ind = length-1; |
| spi_data_ptr->buffer_out_len = count; |
| spi_data_ptr->buffer_out_ind = count-1; |
| int i; |
| for (i = 0; i < length; i++) { |
| for (i = 0; i < count; i++) { |
| spi_data_ptr->buffer_out[i] = array[i]; |
| } |
| IEC0SET = 0x02000000; // Enable TX interrupt |
| /PIC Stuff/Cerebot_32MX7_LED_Cube/SPI1.h |
|---|
| 1,13 → 1,12 |
| #ifndef SPI1_H |
| #define SPI1_H |
| #define SPI1_BUFFER_OUT_SIZE 300 |
| //#define SPI1_BUFFER_IN_SIZE 10 |
| #define SPI1_BUFFER_SIZE 300 |
| #define SPI_WRITE_ONLY |
| typedef struct { |
| char buffer_out[SPI1_BUFFER_OUT_SIZE]; |
| char buffer_out[SPI1_BUFFER_SIZE]; |
| int buffer_out_ind; |
| int buffer_out_len; |
| 17,7 → 16,7 |
| void SPI1_Init(SPI1_DATA *data, void (*rx_callback)(char)); |
| // Note: SPI1_Write() writes MSB -> LSB! |
| int SPI1_Write(char *array, int length, void (*tx_callback)(void)); |
| int SPI1_Write(unsigned char *array, unsigned int count, void (*tx_callback)(void)); |
| #endif /* SPI1_H */ |