| 0,0 → 1,132 |
|---|
| /* ============================================================================ */ |
| /* Copyright (c) 2013, Texas Instruments Incorporated */ |
| /* All rights reserved. */ |
| /* */ |
| /* Redistribution and use in source and binary forms, with or without */ |
| /* modification, are permitted provided that the following conditions */ |
| /* are met: */ |
| /* */ |
| /* * Redistributions of source code must retain the above copyright */ |
| /* notice, this list of conditions and the following disclaimer. */ |
| /* */ |
| /* * Redistributions in binary form must reproduce the above copyright */ |
| /* notice, this list of conditions and the following disclaimer in the */ |
| /* documentation and/or other materials provided with the distribution. */ |
| /* */ |
| /* * Neither the name of Texas Instruments Incorporated nor the names of */ |
| /* its contributors may be used to endorse or promote products derived */ |
| /* from this software without specific prior written permission. */ |
| /* */ |
| /* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */ |
| /* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */ |
| /* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */ |
| /* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */ |
| /* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */ |
| /* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */ |
| /* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */ |
| /* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */ |
| /* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */ |
| /* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ |
| /* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ |
| /* ============================================================================ */ |
| |
| /******************************************************************************/ |
| /* lnk_msp430g2553.cmd - LINKER COMMAND FILE FOR LINKING MSP430G2553 PROGRAMS */ |
| /* */ |
| /* Usage: lnk430 <obj files...> -o <out file> -m <map file> lnk.cmd */ |
| /* cl430 <src files...> -z -o <out file> -m <map file> lnk.cmd */ |
| /* */ |
| /*----------------------------------------------------------------------------*/ |
| /* These linker options are for command line linking only. For IDE linking, */ |
| /* you should set your linker options in Project Properties */ |
| /* -c LINK USING C CONVENTIONS */ |
| /* -stack 0x0100 SOFTWARE STACK SIZE */ |
| /* -heap 0x0100 HEAP AREA SIZE */ |
| /* */ |
| /*----------------------------------------------------------------------------*/ |
| |
| |
| /****************************************************************************/ |
| /* SPECIFY THE SYSTEM MEMORY MAP */ |
| /****************************************************************************/ |
| |
| MEMORY |
| { |
| SFR : origin = 0x0000, length = 0x0010 |
| PERIPHERALS_8BIT : origin = 0x0010, length = 0x00F0 |
| PERIPHERALS_16BIT : origin = 0x0100, length = 0x0100 |
| RAM : origin = 0x0200, length = 0x0200 |
| INFOA : origin = 0x10C0, length = 0x0040 |
| INFOB : origin = 0x1080, length = 0x0040 |
| INFOC : origin = 0x1040, length = 0x0040 |
| INFOD : origin = 0x1000, length = 0x0040 |
| FLASH : origin = 0xC000, length = 0x3FE0 |
| INT00 : origin = 0xFFE0, length = 0x0002 |
| INT01 : origin = 0xFFE2, length = 0x0002 |
| INT02 : origin = 0xFFE4, length = 0x0002 |
| INT03 : origin = 0xFFE6, length = 0x0002 |
| INT04 : origin = 0xFFE8, length = 0x0002 |
| INT05 : origin = 0xFFEA, length = 0x0002 |
| INT06 : origin = 0xFFEC, length = 0x0002 |
| INT07 : origin = 0xFFEE, length = 0x0002 |
| INT08 : origin = 0xFFF0, length = 0x0002 |
| INT09 : origin = 0xFFF2, length = 0x0002 |
| INT10 : origin = 0xFFF4, length = 0x0002 |
| INT11 : origin = 0xFFF6, length = 0x0002 |
| INT12 : origin = 0xFFF8, length = 0x0002 |
| INT13 : origin = 0xFFFA, length = 0x0002 |
| INT14 : origin = 0xFFFC, length = 0x0002 |
| RESET : origin = 0xFFFE, length = 0x0002 |
| } |
| |
| /****************************************************************************/ |
| /* SPECIFY THE SECTIONS ALLOCATION INTO MEMORY */ |
| /****************************************************************************/ |
| |
| SECTIONS |
| { |
| .bss : {} > RAM /* GLOBAL & STATIC VARS */ |
| .data : {} > RAM /* GLOBAL & STATIC VARS */ |
| .sysmem : {} > RAM /* DYNAMIC MEMORY ALLOCATION AREA */ |
| .stack : {} > RAM (HIGH) /* SOFTWARE SYSTEM STACK */ |
| |
| .text : {} > FLASH /* CODE */ |
| .cinit : {} > FLASH /* INITIALIZATION TABLES */ |
| .const : {} > FLASH /* CONSTANT DATA */ |
| .cio : {} > RAM /* C I/O BUFFER */ |
| |
| .pinit : {} > FLASH /* C++ CONSTRUCTOR TABLES */ |
| .init_array : {} > FLASH /* C++ CONSTRUCTOR TABLES */ |
| .mspabi.exidx : {} > FLASH /* C++ CONSTRUCTOR TABLES */ |
| .mspabi.extab : {} > FLASH /* C++ CONSTRUCTOR TABLES */ |
| |
| .infoA : {} > INFOA /* MSP430 INFO FLASH MEMORY SEGMENTS */ |
| .infoB : {} > INFOB |
| .infoC : {} > INFOC |
| .infoD : {} > INFOD |
| |
| /* MSP430 INTERRUPT VECTORS */ |
| .int00 : {} > INT00 |
| .int01 : {} > INT01 |
| PORT1 : { * ( .int02 ) } > INT02 type = VECT_INIT |
| PORT2 : { * ( .int03 ) } > INT03 type = VECT_INIT |
| .int04 : {} > INT04 |
| ADC10 : { * ( .int05 ) } > INT05 type = VECT_INIT |
| USCIAB0TX : { * ( .int06 ) } > INT06 type = VECT_INIT |
| USCIAB0RX : { * ( .int07 ) } > INT07 type = VECT_INIT |
| TIMER0_A1 : { * ( .int08 ) } > INT08 type = VECT_INIT |
| TIMER0_A0 : { * ( .int09 ) } > INT09 type = VECT_INIT |
| WDT : { * ( .int10 ) } > INT10 type = VECT_INIT |
| COMPARATORA : { * ( .int11 ) } > INT11 type = VECT_INIT |
| TIMER1_A1 : { * ( .int12 ) } > INT12 type = VECT_INIT |
| TIMER1_A0 : { * ( .int13 ) } > INT13 type = VECT_INIT |
| NMI : { * ( .int14 ) } > INT14 type = VECT_INIT |
| .reset : {} > RESET /* MSP430 RESET VECTOR */ |
| } |
| |
| /****************************************************************************/ |
| /* INCLUDE PERIPHERALS MEMORY MAP */ |
| /****************************************************************************/ |
| |
| -l msp430g2553.cmd |
| |