//PIC Stuff/PICX_12F1840_Clock/I2C1.c |
---|
6,6 → 6,9 |
// Set up the data structures for the base_I2C.code |
// Should be called once before any i2c routines are called |
void I2C1_Init(void) { |
I2C_1_CLK_TRIS = 1; |
I2C_1_DAT_TRIS = 1; |
i2c_data.buffer_in_len = 0; |
i2c_data.buffer_in_read_ind = 0; |
i2c_data.buffer_in_write_ind = 0; |
22,11 → 25,6 |
// Setup the PIC to operate as a master. |
void I2C1_Configure_Master(uint8_t speed) { |
// i2c_data.operating_mode = I2C_MODE_MASTER; |
I2C_1_CLK_TRIS = 1; |
I2C_1_DAT_TRIS = 1; |
SSP1STAT = 0x0; |
SSP1CON1 = 0x0; |
SSP1CON2 = 0x0; |
//PIC Stuff/PICX_12F1840_Clock/NEOPIXEL.c |
---|
45,20 → 45,32 |
} |
} |
void NeoPixel_Set(uint8_t index, uint8_t R, uint8_t G, uint8_t B) { |
void NeoPixel_Set(uint8_t index, uint8_t R, uint8_t G, uint8_t B, uint8_t multiplier) { |
uint8_t i = ((index + neopixel_data.offset) % NEOPIXEL_LENGTH); |
neopixel_data.values[(i * 3) + 0] = G; |
neopixel_data.values[(i * 3) + 1] = R; |
neopixel_data.values[(i * 3) + 2] = B; |
if (G == 0) |
neopixel_data.values[(i * 3) + 0] = 0; |
else |
neopixel_data.values[(i * 3) + 0] = (G * multiplier) - 1; |
if (R == 0) |
neopixel_data.values[(i * 3) + 1] = 0; |
else |
neopixel_data.values[(i * 3) + 1] = (R * multiplier) - 1; |
if (B == 0) |
neopixel_data.values[(i * 3) + 2] = 0; |
else |
neopixel_data.values[(i * 3) + 2] = (B * multiplier) - 1; |
} |
void NeoPixel_Or(uint8_t index, uint8_t R, uint8_t G, uint8_t B) { |
void NeoPixel_Or(uint8_t index, uint8_t R, uint8_t G, uint8_t B, uint8_t multiplier) { |
uint8_t i = ((index + neopixel_data.offset) % NEOPIXEL_LENGTH); |
neopixel_data.values[(i * 3) + 0] |= G; |
neopixel_data.values[(i * 3) + 1] |= R; |
neopixel_data.values[(i * 3) + 2] |= B; |
if (G != 0) |
neopixel_data.values[(i * 3) + 0] |= (G * multiplier) - 1; |
if (R != 0) |
neopixel_data.values[(i * 3) + 1] |= (R * multiplier) - 1; |
if (B != 0) |
neopixel_data.values[(i * 3) + 2] |= (B * multiplier) - 1; |
} |
void NeoPixel_Write_All(void) { |
//PIC Stuff/PICX_12F1840_Clock/NEOPIXEL.h |
---|
6,16 → 6,16 |
#define NEOPIXEL_LOGIC_1 0b00000110 |
#define NEOPIXEL_LOGIC_0 0b00000011 |
// Color Definitions |
// Color Definitions (base of 16 levels) |
#define CLEAR 0x00,0x00,0x00 |
#define RED 0xFF,0x00,0x00 |
#define ORANGE 0x8F,0x20,0x00 |
#define YELLOW 0x8F,0x8F,0x00 |
#define GREEN 0x00,0xFF,0x00 |
#define TEAL 0x00,0x8F,0x40 |
#define BLUE 0x00,0x00,0xFF |
#define PURPLE 0x8F,0x00,0x8F |
#define WHITE 0x6F,0x6F,0x6F |
#define RED 0x10,0x00,0x00 |
#define ORANGE 0x08,0x02,0x00 |
#define YELLOW 0x08,0x08,0x00 |
#define GREEN 0x00,0x10,0x00 |
#define TEAL 0x00,0x08,0x04 |
#define BLUE 0x00,0x00,0x10 |
#define PURPLE 0x08,0x00,0x08 |
#define WHITE 0x08,0x08,0x08 |
typedef struct { |
uint8_t values[NEOPIXEL_LENGTH * 3]; |
25,8 → 25,8 |
void NeoPixel_Init(void); |
void NeoPixel_Offet(uint8_t value); |
void NeoPixel_Clear(void); |
void NeoPixel_Set(uint8_t index, uint8_t R, uint8_t G, uint8_t B); |
void NeoPixel_Or(uint8_t index, uint8_t R, uint8_t G, uint8_t B); |
void NeoPixel_Set(uint8_t index, uint8_t R, uint8_t G, uint8_t B, uint8_t multiplier); |
void NeoPixel_Or(uint8_t index, uint8_t R, uint8_t G, uint8_t B, uint8_t multiplier); |
void NeoPixel_Write_All(void); |
void NeoPixel_Write_One(uint8_t value); |
//PIC Stuff/PICX_12F1840_Clock/TSL2561.c |
---|
182,10 → 182,10 |
if (channel == 0) { |
// Reads two byte value from channel 0 (visible + infrared) |
return TSL2561_Read_2_Bytes(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN1_LOW); |
return TSL2561_Read_2_Bytes(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN0_LOW); |
} else if (channel == 1) { |
// Reads two byte value from channel 1 (infrared) |
return TSL2561_Read_2_Bytes(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN0_LOW); |
return TSL2561_Read_2_Bytes(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN1_LOW); |
} |
TSL2561_Disable(); |
//PIC Stuff/PICX_12F1840_Clock/funclist |
---|
1,31 → 1,35 |
_DS3231_Init: CODE, 1584 0 29 |
_I2C1_Init: CODE, 1766 0 15 |
_I2C1_Read_Buffer: CODE, 1456 0 38 |
_TSL2561_Set_Timing: CODE, 1688 0 22 |
_I2C1_Master_Restart: CODE, 1367 0 45 |
___awmod: CODE, 1195 0 72 |
_TSL2561_Disable: CODE, 1824 0 6 |
_main: CODE, 410 0 273 |
_Interrupt_Enable: CODE, 1830 0 3 |
___awdiv: CODE, 1571 0 84 |
_DS3231_Init: CODE, 4000 0 29 |
_I2C1_Init: CODE, 3834 0 18 |
_I2C1_Read_Buffer: CODE, 4058 0 38 |
_TSL2561_Set_Timing: CODE, 3874 0 22 |
_I2C1_Master_Restart: CODE, 1930 0 45 |
___awmod: CODE, 1655 0 72 |
_TSL2561_Disable: CODE, 3751 0 6 |
_main: CODE, 19 0 394 |
_Interrupt_Enable: CODE, 3748 0 3 |
_InterruptHandler: CODE, 4 0 13 |
_TSL2561_Write_2_Bytes: CODE, 1555 0 29 |
__initialization: CODE, 1641 0 21 |
_DS3231_Get_Status: CODE, 1665 0 23 |
_I2C1_Configure_Master: CODE, 1494 0 32 |
_NeoPixel_Or: CODE, 972 0 122 |
_DS3231_Get_Time: CODE, 683 0 155 |
_NeoPixel_Set: CODE, 838 0 134 |
_I2C1_Master_Send: CODE, 1267 0 50 |
_I2C1_Interrupt_Handler: CODE, 19 0 391 |
_NeoPixel_Init: CODE, 1317 0 50 |
_TSL2561_Init: CODE, 1412 0 44 |
_NeoPixel_Clear: CODE, 1732 0 17 |
_TSL2561_Set_Gain: CODE, 1710 0 22 |
_NeoPixel_Offet: CODE, 1805 0 10 |
_NeoPixel_Write_One: CODE, 1094 0 101 |
_I2C1_Get_Status: CODE, 1793 0 12 |
___wmul: CODE, 1526 0 29 |
_NeoPixel_Write_All: CODE, 1613 0 28 |
___bmul: CODE, 1749 0 17 |
_TSL2561_Enable: CODE, 1815 0 9 |
Total: 1812 |
_TSL2561_Write_2_Bytes: CODE, 4029 0 29 |
__initialization: CODE, 3919 0 21 |
_DS3231_Get_Status: CODE, 3896 0 23 |
___lwdiv: CODE, 1727 0 55 |
_I2C1_Configure_Master: CODE, 3971 0 29 |
_TSL2561_Read_2_Bytes: CODE, 1882 0 48 |
_NeoPixel_Or: CODE, 1066 0 158 |
_DS3231_Get_Time: CODE, 1224 0 155 |
_NeoPixel_Set: CODE, 804 0 262 |
_I2C1_Master_Send: CODE, 1782 0 50 |
_I2C1_Interrupt_Handler: CODE, 413 0 391 |
_NeoPixel_Init: CODE, 1832 0 50 |
_TSL2561_Init: CODE, 1975 0 44 |
_NeoPixel_Clear: CODE, 3817 0 17 |
_TSL2561_Set_Gain: CODE, 3852 0 22 |
_NeoPixel_Offet: CODE, 3766 0 10 |
_NeoPixel_Write_One: CODE, 1379 0 101 |
_I2C1_Get_Status: CODE, 3776 0 12 |
___wmul: CODE, 2019 0 29 |
_NeoPixel_Write_All: CODE, 3943 0 28 |
_TSL2561_Get_Luminosity: CODE, 1480 0 91 |
___bmul: CODE, 3800 0 17 |
_TSL2561_Enable: CODE, 3757 0 9 |
Total: 2375 |
//PIC Stuff/PICX_12F1840_Clock/l.obj |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
//PIC Stuff/PICX_12F1840_Clock/main.c |
---|
15,7 → 15,7 |
#pragma config MCLRE = ON // MCLR/VPP pin function is MCLR |
#pragma config WDTE = OFF // WDT disabled |
#pragma config CP = OFF // Program memory code protection is disabled |
#pragma config PWRTE = OFF // PWRT disabled |
#pragma config PWRTE = ON // PWRT enabled |
#pragma config CLKOUTEN = OFF // CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin |
/* Config Register CONFIG2 @ 0x8008 */ |
38,12 → 38,13 |
ANSELA = 0x00; // All pins set to digital I/O |
APFCONbits.CCP1SEL = 1; // Switch CCP1 from RA2 to RA5 |
WPUA = 0x00; // Disable weak pull-ups |
// Wait for HFINTOSC to be within 0.5% of target 32Mhz |
while (!OSCSTATbits.HFIOFS); |
Interrupt_Enable(); |
I2C1_Init(); |
I2C1_Configure_Master(I2C_1MHZ); |
55,8 → 56,8 |
TSL2561_Init(TSL2561_ADDR_FLOAT); |
// You can change the gain on the fly, to adapt to brighter/dimmer light situations |
TSL2561_Set_Gain(TSL2561_GAIN_0X); // set no gain (for bright situtations) |
// TSL2561_Set_Gain(TSL2561_GAIN_16X); // set 16x gain (for dim situations) |
// TSL2561_Set_Gain(TSL2561_GAIN_0X); // set no gain (for bright situtations) |
TSL2561_Set_Gain(TSL2561_GAIN_16X); // set 16x gain (for dim situations) |
// Changing the integration time gives you a longer time over which to sense light |
// longer timelines are slower, but are good in very low light situtations! |
64,42 → 65,50 |
TSL2561_Set_Timing(TSL2561_INTEGRATIONTIME_101MS); // medium integration time (medium light) |
// TSL2561_Set_Timing(TSL2561_INTEGRATIONTIME_402MS); // longest integration time (dim light) |
// uint16_t full, ir, vis; |
uint16_t full; |
uint8_t multiplier, multiplier_2; |
// time.sec = 0; |
// time.min = 16; |
// time.hour = 7; |
// time.h_mil = 0; |
// time.h_am_pm = 1; |
// |
// DS3231_Set_Time(&time); |
while(1) { |
// full = TSL2561_Get_Luminosity(0); |
// ir = TSL2561_Get_Luminosity(1); |
// vis = full - ir; |
// |
// ~37200 seems to be the max value at 16X gain, 101ms period |
full = TSL2561_Get_Luminosity(0); |
multiplier = (full / 3100) + 1; // 12 levels (1-12) |
multiplier_2 = (multiplier / 7) + 1; // 2 levels (1-2) |
// NeoPixel_Clear(); |
// for (uint8_t i = 0; i < (vis >> 11); i++) { |
// NeoPixel_Set(i, 0x10, 0x00, 0x00); |
// for (uint8_t i = 0; i < multiplier; i++) { |
// NeoPixel_Set(i, 0x10, 0x00, 0x00, 1); |
// } |
// NeoPixel_Write_All(); |
// |
// __delay_ms(100); |
DS3231_Get_Time(&time); |
NeoPixel_Clear(); |
// Draw markers |
NeoPixel_Set(0, 0x10, 0x00, 0x00); |
NeoPixel_Set(5, 0x08, 0x02, 0x00); |
NeoPixel_Set(10, 0x08, 0x08, 0x00); |
NeoPixel_Set(15, 0x00, 0x10, 0x00); |
NeoPixel_Set(20, 0x00, 0x00, 0x10); |
NeoPixel_Set(25, 0x08, 0x00, 0x08); |
NeoPixel_Set(30, 0x10, 0x00, 0x00); |
NeoPixel_Set(35, 0x08, 0x02, 0x00); |
NeoPixel_Set(40, 0x08, 0x08, 0x00); |
NeoPixel_Set(45, 0x00, 0x10, 0x00); |
NeoPixel_Set(50, 0x00, 0x00, 0x10); |
NeoPixel_Set(55, 0x08, 0x00, 0x08); |
NeoPixel_Set(00, RED, multiplier_2); |
NeoPixel_Set(30, RED, multiplier_2); |
NeoPixel_Set(05, ORANGE, multiplier_2); |
NeoPixel_Set(35, ORANGE, multiplier_2); |
NeoPixel_Set(10, YELLOW, multiplier_2); |
NeoPixel_Set(40, YELLOW, multiplier_2); |
NeoPixel_Set(15, GREEN, multiplier_2); |
NeoPixel_Set(45, GREEN, multiplier_2); |
NeoPixel_Set(20, BLUE, multiplier_2); |
NeoPixel_Set(50, BLUE, multiplier_2); |
NeoPixel_Set(25, PURPLE, multiplier_2); |
NeoPixel_Set(55, PURPLE, multiplier_2); |
// Draw time |
NeoPixel_Or((time.hour * 5) % 60, BLUE); |
NeoPixel_Or(time.min, GREEN); |
NeoPixel_Or(time.sec, RED); |
NeoPixel_Or((time.hour * 5) % 60, BLUE, multiplier + 4); |
NeoPixel_Or(time.min, GREEN, multiplier + 4); |
NeoPixel_Or(time.sec, RED, multiplier + 4); |
NeoPixel_Write_All(); |
} |
} |
//PIC Stuff/PICX_12F1840_Clock/nbproject/Makefile-genesis.properties |
---|
1,5 → 1,5 |
# |
#Sun Mar 30 00:42:55 EDT 2014 |
#Sun Mar 30 17:07:11 EDT 2014 |
default.languagetoolchain.dir=C\:\\Program Files (x86)\\Microchip\\xc8\\v1.20\\bin |
com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=1f98a0eed69cb2a45c12981fa9470927 |
default.languagetoolchain.version=1.20 |