Subversion Repositories Code-Repo

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
228 Kevin 1 
#include <xc.h>
2 
#include "defines.h"
3 
#include "base_INTERRUPTS.h"
4 
#include "base_I2C.h"
5 
 
6 
void Interrupt_Init() {
7 
    // Enable MSSP1 interrupt
8 
    PIE1bits.SSP1IE = 1;
9 
}
10 
 
11 
void Interrupt_Enable() {
12 
    // Enable global and peripheral interrupts
13 
    INTCONbits.PEIE = 1;
14 
    INTCONbits.GIE = 1;
15 
}
16 
 
17 
void Interrupt_Disable() {
18 
    INTCONbits.PEIE = 0;
19 
    INTCONbits.GIE = 0;
20 
}
21 
 
22 
void interrupt InterruptHandler(void) {
23 
    // We need to check the interrupt flag of each enabled high-priority interrupt to
24 
    //  see which device generated this interrupt.  Then we can call the correct handler.
25 
 
26 
//    // Check to see if we have an SPI2 interrupt
27 
//    if (PIR3bits.SSP2IF) {
28 
//        // Call the handler
29 
//        SPI2_Recv_Interrupt_Handler();
30 
//
31 
//        // Clear the interrupt flag
32 
//        PIR3bits.SSP2IF = 0;
33 
//
34 
//        return;
35 
//    }
36 
 
37 
    // Check to see if we have an I2C interrupt
38 
    if (PIR1bits.SSP1IF) {
39 
 
40 
        // Call the handler
41 
        I2C_Interrupt_Handler();
42 
 
43 
        // Clear the interrupt flag
44 
        PIR1bits.SSP1IF = 0;
45 
 
46 
        return;
47 
    }
48 
 
49 
//    // Check to see if we have an interrupt on USART1 RX
50 
//    if (PIR1bits.RC1IF) {
51 
//        // Call the interrupt handler
52 
//        UART1_Recv_Interrupt_Handler();
53 
//
54 
//        // Clear the interrupt flag
55 
//        PIR1bits.RC1IF = 0;
56 
//
57 
//        return;
58 
//    }
59 
 
60 
//    // Check to see if we have an interrupt on USART1 TX
61 
//    if (PIR1bits.TX1IF) {
62 
//        // Call the interrupt handler
63 
//        UART1_Send_Interrupt_Handler();
64 
//
65 
//        // Clear the interrupt flag
66 
//        PIR1bits.TX1IF = 0;
67 
//
68 
//        return;
69 
//    }
70 
 
71 
//    // Check to see if we have an interrupt on USART2 RX
72 
//    if (PIR3bits.RC2IF) {
73 
//        DBG_PRINT_INT("INT: UART2 RX\r\n");
74 
//        // Call the interrupt handler
75 
//        uart_2_recv_interrupt_handler();
76 
//
77 
//        // Clear the interrupt flag
78 
//        PIR3bits.RC2IF = 0;
79 
//    }
80 
}